Welkom bij Een Kleine Wereld - Tabletop Fantasy

Paints all products

101 producten


  • Spray Primer Colour Matt Ochre 400ml

    GreenStuffWorld Spray Primer Colour Matt Ochre 400ml

    Nog 4 op voorraad

    SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #ochre #primer #400ml

    Nog 4 op voorraad

    €9,50

  • Spray Primer Colour Matt White 400ml

    GreenStuffWorld Spray Primer Colour Matt White 400ml

    Nog 10 op voorraad

    SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #white #primer #400ml

    Nog 10 op voorraad

    €9,50

  • Spray Primer Colour Matt Grey 400ml

    GreenStuffWorld Spray Primer Colour Matt Grey 400ml

    Nog 8 op voorraad

    SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #grey #primer #400ml

    Nog 8 op voorraad

    €9,00

  • Spray Primer Colour Matt Black 400ml

    GreenStuffWorld Spray Primer Colour Matt Black 400ml

    Nog 15 op voorraad

    SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #black #primer #400ml

    Nog 15 op voorraad

    €9,00

  • Spray Primer Colour Gloss Black 400ml

    GreenStuffWorld Spray Primer Colour Gloss Black 400ml

    Nog 11 op voorraad

    MATT Protection Sealings High-quality varnishes to get an amazing sealing with non-yellowing properties. Ultra-resistant and with the best adherence IMPORTANT: Matt varnishes sprays could whiten in the case are not applied correctly. They are highly loaded sprays so you should not apply more than 2 coats. It should be applied with movements from left to right without concentrating on any point.In 99% of cases, 1 layer from left to right and another from right to left is more than enough. INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Do not apply too much paint in one spot to avoid "eyecat effect" and dripping. This type of paint should be applied with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. - Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #black #gloss #primer #400ml

    Nog 11 op voorraad

    €9,00

  • Pigment Metal Bronze - metaal brons Pigment Metal Bronze - metaal brons

    GreenStuffWorld Pigment Metal Bronze - metaal brons

    Nog 4 op voorraad

    Pure Metal Pigments A new special range of powder pigments, Pure Metal Pigments. They are pigments elaborated from real metals, giving them a high degree of realism. For their application it is recommended to mix them with a small amount of some medium (varnish, paint, pigment fixer, but we especially recommend Master Medium) and apply it by extending it as much as possible onto the surface. An excessive amount of medium can attenuate the metallic effect. An adequate amount of medium will allow the pigments to be airbrushed. They can be mixed with other colors and paints to add variations or hues. They can be used with both acrylic and non-acrylic paints and mediums, and in combination with epoxy resins. They can be also used in combination with accelerating oxidation products to create real oxidation effects. They can be polished after application with something smooth. It is recommended to apply onto matte surfaces for a better grip. Content: 30ml REMARKS:- Each bottle includes 30ml of the product by volume. Due to the high compaction capacity of these pigments, when opening the can, it could give the visual sensation of including less product. If the bottle is shaken before use, the pigment will decompress, filling the 30ml offered volume.- These pigments are not toxic, but you should avoid inhaling their dust.- Keep the bottle tightly closed in a cool and dry place to avoid its oxidation. - Once painted or sealed with a medium, even acrylic, it will not rust. (geautomatiseerde vertalig:) Pure metaalpigmenten Een nieuw speciaal assortiment poederpigmenten, Pure Metal Pigments. Het zijn pigmenten die zijn gemaakt van echte metalen, waardoor ze een hoge mate van realisme hebben. Voor hun toepassing wordt aanbevolen om ze te mengen met een kleine hoeveelheid medium (vernis, verf, pigment fixeermiddel, maar we raden vooral Master Medium aan) en dit aan te brengen door het zoveel mogelijk uit te strekken op het oppervlak. Een overmatige hoeveelheid medium kan het metaalachtigeeffect verzwakken. Met een voldoende hoeveelheid medium kunnen de pigmenten worden gespoten. Ze kunnen worden gemengd met andere kleuren en verven om variaties of tinten toe te voegen. Ze kunnen worden gebruikt met zowel acrylverf als niet-acrylverf en mediums, en in combinatiemet epoxyharsen. Ze kunnen ook worden gebruikt in combinatie met versnellende oxidatieproducten om echte oxidatie-effecten te creëren. Ze kunnen na het aanbrengen gepolijst worden met iets glads. Het wordt aanbevolen om aan te brengen op matte oppervlakken voor een betere grip. Inhoud: 30ml OPMERKINGEN: - Elke fles bevat 30 ml van het product per volume. Vanwege het hoge verdichtingscapaciteit van deze pigmenten, kan het bij het openen van het blik het visuele gevoel geven dat er minder product wordt opgenomen. Als de fles voor gebruik wordt geschud, zal het pigment decomprimeren en het aangeboden volume van 30 ml vullen. - Deze pigmenten zijn niet giftig, maar u moet voorkomen dat u hun stof inademt. - Bewaar de fles goed gesloten op een koele en droge plaats om oxidatie te voorkomen. - Eenmaal geverfd of verzegeld met een medium, zelfs acryl, zal het niet roesten.

    Nog 4 op voorraad

    €7,00

  • Pigment Metal Antique Gold - metaal oud goud Pigment Metal Antique Gold - metaal oud goud

    GreenStuffWorld Pigment Metal Antique Gold - metaal oud goud

    Nog 5 op voorraad

    Pure Metal Pigments A new special range of powder pigments, Pure Metal Pigments. They are pigments elaborated from real metals, giving them a high degree of realism. For their application it is recommended to mix them with a small amount of some medium (varnish, paint, pigment fixer, but we especially recommend Master Medium) and apply it by extending it as much as possible onto the surface. An excessive amount of medium can attenuate the metallic effect. An adequate amount of medium will allow the pigments to be airbrushed. They can be mixed with other colors and paints to add variations or hues. They can be used with both acrylic and non-acrylic paints and mediums, and in combination with epoxy resins. They can be also used in combination with accelerating oxidation products to create real oxidation effects. They can be polished after application with something smooth. It is recommended to apply onto matte surfaces for a better grip. Content: 30ml REMARKS:- Each bottle includes 30ml of the product by volume. Due to the high compaction capacity of these pigments, when opening the can, it could give the visual sensation of including less product. If the bottle is shaken before use, the pigment will decompress, filling the 30ml offered volume.- These pigments are not toxic, but you should avoid inhaling their dust.- Keep the bottle tightly closed in a cool and dry place to avoid its oxidation. - Once painted or sealed with a medium, even acrylic, it will not rust. (geautomatiseerde vertalig:) Pure metaalpigmenten Een nieuw speciaal assortiment poederpigmenten, Pure Metal Pigments. Het zijn pigmenten die zijn gemaakt van echte metalen, waardoor ze een hoge mate van realisme hebben. Voor hun toepassing wordt aanbevolen om ze te mengen met een kleine hoeveelheid medium (vernis, verf, pigment fixeermiddel, maar we raden vooral Master Medium aan) en dit aan te brengen door het zoveel mogelijk uit te strekken op het oppervlak. Een overmatige hoeveelheid medium kan het metaalachtigeeffect verzwakken. Met een voldoende hoeveelheid medium kunnen de pigmenten worden gespoten. Ze kunnen worden gemengd met andere kleuren en verven om variaties of tinten toe te voegen. Ze kunnen worden gebruikt met zowel acrylverf als niet-acrylverf en mediums, en in combinatiemet epoxyharsen. Ze kunnen ook worden gebruikt in combinatie met versnellende oxidatieproducten om echte oxidatie-effecten te creëren. Ze kunnen na het aanbrengen gepolijst worden met iets glads. Het wordt aanbevolen om aan te brengen op matte oppervlakken voor een betere grip. Inhoud: 30ml OPMERKINGEN: - Elke fles bevat 30 ml van het product per volume. Vanwege het hoge verdichtingscapaciteit van deze pigmenten, kan het bij het openen van het blik het visuele gevoel geven dat er minder product wordt opgenomen. Als de fles voor gebruik wordt geschud, zal het pigment decomprimeren en het aangeboden volume van 30 ml vullen. - Deze pigmenten zijn niet giftig, maar u moet voorkomen dat u hun stof inademt. - Bewaar de fles goed gesloten op een koele en droge plaats om oxidatie te voorkomen. - Eenmaal geverfd of verzegeld met een medium, zelfs acryl, zal het niet roesten.

    Nog 5 op voorraad

    €7,00

  • Pigment Metal Copper - metaal Koper Pigment Metal Copper - metaal Koper

    GreenStuffWorld Pigment Metal Copper - metaal Koper

    Nog 5 op voorraad

    Pure Metal Pigments A new special range of powder pigments, Pure Metal Pigments. They are pigments elaborated from real metals, giving them a high degree of realism. For their application it is recommended to mix them with a small amount of some medium (varnish, paint, pigment fixer, but we especially recommend Master Medium) and apply it by extending it as much as possible onto the surface. An excessive amount of medium can attenuate the metallic effect. An adequate amount of medium will allow the pigments to be airbrushed. They can be mixed with other colors and paints to add variations or hues. They can be used with both acrylic and non-acrylic paints and mediums, and in combination with epoxy resins. They can be also used in combination with accelerating oxidation products to create real oxidation effects. They can be polished after application with something smooth. It is recommended to apply onto matte surfaces for a better grip. Content: 30ml REMARKS:- Each bottle includes 30ml of the product by volume. Due to the high compaction capacity of these pigments, when opening the can, it could give the visual sensation of including less product. If the bottle is shaken before use, the pigment will decompress, filling the 30ml offered volume.- These pigments are not toxic, but you should avoid inhaling their dust.- Keep the bottle tightly closed in a cool and dry place to avoid its oxidation. - Once painted or sealed with a medium, even acrylic, it will not rust. (geautomatiseerde vertalig:) Pure metaalpigmenten Een nieuw speciaal assortiment poederpigmenten, Pure Metal Pigments. Het zijn pigmenten die zijn gemaakt van echte metalen, waardoor ze een hoge mate van realisme hebben. Voor hun toepassing wordt aanbevolen om ze te mengen met een kleine hoeveelheid medium (vernis, verf, pigment fixeermiddel, maar we raden vooral Master Medium aan) en dit aan te brengen door het zoveel mogelijk uit te strekken op het oppervlak. Een overmatige hoeveelheid medium kan het metaalachtigeeffect verzwakken. Met een voldoende hoeveelheid medium kunnen de pigmenten worden gespoten. Ze kunnen worden gemengd met andere kleuren en verven om variaties of tinten toe te voegen. Ze kunnen worden gebruikt met zowel acrylverf als niet-acrylverf en mediums, en in combinatiemet epoxyharsen. Ze kunnen ook worden gebruikt in combinatie met versnellende oxidatieproducten om echte oxidatie-effecten te creëren. Ze kunnen na het aanbrengen gepolijst worden met iets glads. Het wordt aanbevolen om aan te brengen op matte oppervlakken voor een betere grip. Inhoud: 30ml OPMERKINGEN: - Elke fles bevat 30 ml van het product per volume. Vanwege het hoge verdichtingscapaciteit van deze pigmenten, kan het bij het openen van het blik het visuele gevoel geven dat er minder product wordt opgenomen. Als de fles voor gebruik wordt geschud, zal het pigment decomprimeren en het aangeboden volume van 30 ml vullen. - Deze pigmenten zijn niet giftig, maar u moet voorkomen dat u hun stof inademt. - Bewaar de fles goed gesloten op een koele en droge plaats om oxidatie te voorkomen. - Eenmaal geverfd of verzegeld met een medium, zelfs acryl, zal het niet roesten.

    Nog 5 op voorraad

    €7,00

  • Pigment Metal Gold - metaal goud Pigment Metal Gold - metaal goud

    GreenStuffWorld Pigment Metal Gold - metaal goud

    Nog 3 op voorraad

    Pure Metal Pigments A new special range of powder pigments, Pure Metal Pigments. They are pigments elaborated from real metals, giving them a high degree of realism. For their application it is recommended to mix them with a small amount of some medium (varnish, paint, pigment fixer, but we especially recommend Master Medium) and apply it by extending it as much as possible onto the surface. An excessive amount of medium can attenuate the metallic effect. An adequate amount of medium will allow the pigments to be airbrushed. They can be mixed with other colors and paints to add variations or hues. They can be used with both acrylic and non-acrylic paints and mediums, and in combination with epoxy resins. They can be also used in combination with accelerating oxidation products to create real oxidation effects. They can be polished after application with something smooth. It is recommended to apply onto matte surfaces for a better grip. Content: 30ml REMARKS:- Each bottle includes 30ml of the product by volume. Due to the high compaction capacity of these pigments, when opening the can, it could give the visual sensation of including less product. If the bottle is shaken before use, the pigment will decompress, filling the 30ml offered volume.- These pigments are not toxic, but you should avoid inhaling their dust.- Keep the bottle tightly closed in a cool and dry place to avoid its oxidation. - Once painted or sealed with a medium, even acrylic, it will not rust. (geautomatiseerde vertalig:) Pure metaalpigmenten Een nieuw speciaal assortiment poederpigmenten, Pure Metal Pigments. Het zijn pigmenten die zijn gemaakt van echte metalen, waardoor ze een hoge mate van realisme hebben. Voor hun toepassing wordt aanbevolen om ze te mengen met een kleine hoeveelheid medium (vernis, verf, pigment fixeermiddel, maar we raden vooral Master Medium aan) en dit aan te brengen door het zoveel mogelijk uit te strekken op het oppervlak. Een overmatige hoeveelheid medium kan het metaalachtigeeffect verzwakken. Met een voldoende hoeveelheid medium kunnen de pigmenten worden gespoten. Ze kunnen worden gemengd met andere kleuren en verven om variaties of tinten toe te voegen. Ze kunnen worden gebruikt met zowel acrylverf als niet-acrylverf en mediums, en in combinatiemet epoxyharsen. Ze kunnen ook worden gebruikt in combinatie met versnellende oxidatieproducten om echte oxidatie-effecten te creëren. Ze kunnen na het aanbrengen gepolijst worden met iets glads. Het wordt aanbevolen om aan te brengen op matte oppervlakken voor een betere grip. Inhoud: 30ml OPMERKINGEN: - Elke fles bevat 30 ml van het product per volume. Vanwege het hoge verdichtingscapaciteit van deze pigmenten, kan het bij het openen van het blik het visuele gevoel geven dat er minder product wordt opgenomen. Als de fles voor gebruik wordt geschud, zal het pigment decomprimeren en het aangeboden volume van 30 ml vullen. - Deze pigmenten zijn niet giftig, maar u moet voorkomen dat u hun stof inademt. - Bewaar de fles goed gesloten op een koele en droge plaats om oxidatie te voorkomen. - Eenmaal geverfd of verzegeld met een medium, zelfs acryl, zal het niet roesten.

    Nog 3 op voorraad

    €7,00

  • Time Orange pigment Glow in the Dark 30ml Time Orange pigment Glow in the Dark 30ml

    GreenStuffWorld Time Orange pigment Glow in the Dark 30ml

    Nog 5 op voorraad

    Luminescent Glow in the Dark powder able to collect energy from light and store the light energy for some time making them glow for hours afterward, even when the light source is turned off. The maximum luminescence remains for 20-30 minutes, after which the energy gradually fades. The process of absorbing light energy can be achieved simply by exposure to light. Ultraviolet lights have the ability to overload these pigments strongly. Our ultra glow powder is a phosphorescent product that can be mixed with water and non-water based mediums to be fixed. We recommend using them in the combination with master mediums, paints, varnish, or UV resin for them to stay permanently. These luminescent pigments can also be mixed with fluor pigments to enhance the daylight color. The lighting strength will decrease as more fluorine pigments are added. These powder are non-toxic, but you should avoid inhaling them. Contents: 1 bottle of 30ml. Warning:The glow in the dark pigments, yellow and orange, will light up differently depending on the type of light with which they are charged.- If the light used is ultraviolet, Yellow will be Yellow and Orange will be Orange.- If the light used is white light or natural light, Yellow and Orange will have a Greenish color in the dark. Maak met master medium je eigen glow in the dark verf!

    Nog 5 op voorraad

    €6,00

  • Red Matt Surface Primer 60ml

    GreenStuffWorld Red Matt Surface Primer 60ml

    Nog 6 op voorraad

    Matte primer rood - 60ml Acryl primer op waterbasis om je miniatuurverf de juiste hechtingslaag te geven. Te gebruiken met kwast of airbrush. Onze ervaring met deze primer leert dat verdunnen met airbrush gebruik niet nodig is. Aanbrengen op een schone en droge ondergrond (plastic, hout, metalen etc). De primer droogt snel op met een super matte finish. De laag is van uitstekende kwaliteit zonder dat het de details laat verdwijnen. Voor grotere oppervlakten, outdoor projecten of scenery raden wij DecoArt American Satin Multisurface aan. Dit is een primer, verf en sealer in 1 en scheelt aanzienlijk in tijd. Een fles primer heeft 60ml inhoud. Matt Surface Primer 60ml - Red Waterbased acrylic primer. Apply with brush or airbrush over clean and dry surfaces (plastics, wood, metals, etc). Fast drying with a super matt finish of extraordinary hardness and resistance which doesn't hide the details. Contains: 60 ml

    Nog 6 op voorraad

    €6,00

  • Cream Matt Surface Primer 60ml

    GreenStuffWorld Cream Matt Surface Primer 60ml

    Nog 8 op voorraad

    Matte primer cream - 60ml Acryl primer op waterbasis om je miniatuurverf de juiste hechtingslaag te geven. Te gebruiken met kwast of airbrush. Onze ervaring met deze primer leert dat verdunnen met airbrush gebruik niet nodig is. Aanbrengen op een schone en droge ondergrond (plastic, hout, metalen etc). De primer droogt snel op met een super matte finish. De laag is van uitstekende kwaliteit zonder dat het de details laat verdwijnen. Voor grotere oppervlakten, outdoor projecten of scenery raden wij DecoArt American Satin Multisurface aan. Dit is een primer, verf en sealer in 1 en scheelt aanzienlijk in tijd. Een fles primer heeft 60ml inhoud. Matt Surface Primer 60ml - Cream Waterbased acrylic primer. Apply with brush or airbrush over clean and dry surfaces (plastics, wood, metals, etc). Fast drying with a super matt finish of extraordinary hardness and resistance which doesn't hide the details. Contains: 60 ml

    Nog 8 op voorraad

    €6,00

  • Satin Varnish - Zijdeglans vernis 60ml

    GreenStuffWorld Satin Varnish - Zijdeglans vernis 60ml

    Nog 4 op voorraad

    Zijdeglans vernis Een op waterbasis zacht glanzende acryl vernis, ontworpen om modellen te beschermen tegen stof, scherpe voorwerpen, krassen, vuil en vochtigheid. Breng aan op volledig opgedroogde verf in dunne laagjes. Inhoud van dit flesje is 60ml Satin Varnish Water-based acrylic satin varnish, designed to protect models from dust, scratches, dirt, and humidity. Recommended to be applied in thin layers after the paint has fully dried. Valid for brush and airbrush. Content: 1x 60ml bottle

    Nog 4 op voorraad

    €6,00

  • Soul Green pigment Glow in the Dark 30ml Soul Green pigment Glow in the Dark 30ml

    GreenStuffWorld Soul Green pigment Glow in the Dark 30ml

    Nog 5 op voorraad

    Luminescent Glow in the Dark powder able to collect energy from light and store the light energy for some time making them glow for hours afterward, even when the light source is turned off. The maximum luminescence remains for 20-30 minutes, after which the energy gradually fades. The process of absorbing light energy can be achieved simply by exposure to light. Ultraviolet lights have the ability to overload these pigments strongly. Our ultra glow powder is a phosphorescent product that can be mixed with water and non-water based mediums to be fixed. We recommend using them in the combination with master mediums, paints, varnish, or UV resin for them to stay permanently. These luminescent pigments can also be mixed with fluor pigments to enhance the daylight color. The lighting strength will decrease as more fluorine pigments are added. These powder are non-toxic, but you should avoid inhaling them. Contents: 1 bottle of 30ml. Warning:The glow in the dark pigments, yellow and orange, will light up differently depending on the type of light with which they are charged.- If the light used is ultraviolet, Yellow will be Yellow and Orange will be Orange.- If the light used is white light or natural light, Yellow and Orange will have a Greenish color in the dark. Maak met master medium je eigen glow in the dark verf!

    Nog 5 op voorraad

    €6,00

  • Reality Yellow-Green pigment Glow in the Dark 30ml Reality Yellow-Green pigment Glow in the Dark 30ml

    GreenStuffWorld Reality Yellow-Green pigment Glow in the Dark 30ml

    Nog 5 op voorraad

    Luminescent Glow in the Dark powder able to collect energy from light and store the light energy for some time making them glow for hours afterward, even when the light source is turned off. The maximum luminescence remains for 20-30 minutes, after which the energy gradually fades. The process of absorbing light energy can be achieved simply by exposure to light. Ultraviolet lights have the ability to overload these pigments strongly. Our ultra glow powder is a phosphorescent product that can be mixed with water and non-water based mediums to be fixed. We recommend using them in the combination with master mediums, paints, varnish, or UV resin for them to stay permanently. These luminescent pigments can also be mixed with fluor pigments to enhance the daylight color. The lighting strength will decrease as more fluorine pigments are added. These powder are non-toxic, but you should avoid inhaling them. Contents: 1 bottle of 30ml. Warning:The glow in the dark pigments, yellow and orange, will light up differently depending on the type of light with which they are charged.- If the light used is ultraviolet, Yellow will be Yellow and Orange will be Orange.- If the light used is white light or natural light, Yellow and Orange will have a Greenish color in the dark. Maak met master medium je eigen glow in the dark verf!

    Nog 5 op voorraad

    €6,00

  • Green Matt Surface Primer 60ml

    GreenStuffWorld Green Matt Surface Primer 60ml

    Nog 8 op voorraad

    Matte primer groen - 60ml Acryl primer op waterbasis om je miniatuurverf de juiste hechtingslaag te geven. Te gebruiken met kwast of airbrush. Onze ervaring met deze primer leert dat verdunnen met airbrush gebruik niet nodig is. Aanbrengen op een schone en droge ondergrond (plastic, hout, metalen etc). De primer droogt snel op met een super matte finish. De laag is van uitstekende kwaliteit zonder dat het de details laat verdwijnen. Voor grotere oppervlakten, outdoor projecten of scenery raden wij DecoArt American Satin Multisurface aan. Dit is een primer, verf en sealer in 1 en scheelt aanzienlijk in tijd. Een fles primer heeft 60ml inhoud. Matt Surface Primer 60ml - rood Waterbased acrylic primer. Apply with brush or airbrush over clean and dry surfaces (plastics, wood, metals, etc). Fast drying with a super matt finish of extraordinary hardness and resistance which doesn't hide the details. Contains: 60 ml

    Nog 8 op voorraad

    €6,00

  • Grey Matt Surface Primer 60ml

    GreenStuffWorld Grey Matt Surface Primer 60ml

    Nog 8 op voorraad

    Matte primer grijs - 60ml Acryl primer op waterbasis om je miniatuurverf de juiste hechtingslaag te geven. Te gebruiken met kwast of airbrush. Onze ervaring met deze primer leert dat verdunnen met airbrush gebruik niet nodig is. Aanbrengen op een schone en droge ondergrond (plastic, hout, metalen etc). De primer droogt snel op met een super matte finish. De laag is van uitstekende kwaliteit zonder dat het de details laat verdwijnen. Voor grotere oppervlakten, outdoor projecten of scenery raden wij DecoArt American Satin Multisurface aan. Dit is een primer, verf en sealer in 1 en scheelt aanzienlijk in tijd. Een fles primer heeft 60ml inhoud. Matt Surface Primer 60ml - Grey Waterbased acrylic primer. Apply with brush or airbrush over clean and dry surfaces (plastics, wood, metals, etc). Fast drying with a super matt finish of extraordinary hardness and resistance which doesn't hide the details. Contains: 60 ml

    Nog 8 op voorraad

    €6,00

  • Dipping ink 60 ml - Green Shark Skin 3705 Dipping ink 60 ml - Green Shark Skin 3705

    GreenStuffWorld Dipping ink 60 ml - Green Shark Skin 3705

    Nog 6 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speed painting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and glaze colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml #speed #paint #3705 #green #shark #skin #dipping #ink #greenstuffworld

    Nog 6 op voorraad

    €5,00

  • Dipping ink 60 ml - Burgundy Dipping ink 60 ml - Burgundy

    GreenStuffWorld Dipping ink 60 ml - Burgundy 3504

    Nog 6 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Burgundy #speed #paint #burgundy #dip #dipping #ink #greenstuffworld

    Nog 6 op voorraad

    €5,00

  • Dipping ink 60 ml - Goth Skin Dipping ink 60 ml - Goth Skin

    GreenStuffWorld Dipping ink 60 ml - Goth Skin 3503

    Nog 5 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Goth Skin #speed #paint #goth #skin #dip #dipping #ink #greenstuffworld

    Nog 5 op voorraad

    €5,00

  • Dipping ink 60 ml - Turquoise Ghost Dipping ink 60 ml - Turquoise Ghost

    GreenStuffWorld Dipping ink 60 ml - Turquoise Ghost 3502

    Nog 7 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Turquoise Ghost #speed #paint #turquoise #ghost #dip #dipping #ink #greenstuffworld

    Nog 7 op voorraad

    €5,00

  • Dipping ink 60 ml - Acid Green Dipping ink 60 ml - Acid Green

    GreenStuffWorld Dipping ink 60 ml - Acid Green 3501

    Nog 4 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Acid Green #speed #paint #acid #green #dip #dipping #ink #greenstuffworld

    Nog 4 op voorraad

    €5,00

  • Dipping ink 60 ml - Ork Flesh Dipping ink 60 ml - Ork Flesh

    GreenStuffWorld Dipping ink 60 ml - Ork Flesh 3495

    Nog 5 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Ork Flesh #speed #paint #ork #flesh #dipping #ink #greenstuffworld

    Nog 5 op voorraad

    €5,00

  • Dipping ink 60 ml - Hulky Green Dipping ink 60 ml - Hulky Green

    GreenStuffWorld Dipping ink 60 ml - Hulky Green 3494

    Nog 6 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Hulky Green #speed #paint #green #hulky #dipping #ink #greenstuffworld

    Nog 6 op voorraad

    €5,00

  • Dipping ink 60 ml - Green Ghost Dipping ink 60 ml - Green Ghost

    GreenStuffWorld Dipping ink 60 ml - Green Ghost 3493

    Nog 4 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Green Ghost #speed #paint #green #ghost #dipping #ink #greenstuffworld

    Nog 4 op voorraad

    €5,00

  • Dipping ink 60 ml - Green Stone Dipping ink 60 ml - Black Shadow

    GreenStuffWorld Dipping ink 60 ml - Green Stone 3487

    Nog 5 op voorraad

    Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Green Stone #speed #paint #green #stone #dipping #ink #greenstuffworld

    Nog 5 op voorraad

    €5,00

  • Acrylic Inks - Transparent Warm Green 30ml Acrylic Inks - Transparent Warm Green 30ml

    GreenStuffWorld Acrylic Inks - Transparent Warm Green 30ml

    Nog 4 op voorraad

    Acrylic Ink tranparant GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects. These inks offer exceptional versatility, allowing the creation of highly concentrated and intense colors when applied undiluted. Their high-quality pigmentation ensures that the colors maintain their vividness and strength. On the other hand, by diluting the inks, rich color transparencies are achieved that add depth and subtlety to compositions. This ability of acrylic ink to adapt to different techniques and artistic styles makes it a preferred choice for a wide variety of creative projects. The product comes in a glass bottle with a dispensing pipette, which allows you to precisely contour each drop of pigment to control the amount and intensity of the mixtures you work with, giving you the freedom to bring your visions to life with unparalleled clarity and precision. With acrylic inks, you can create everything from color filters to powerful effects of depth and luminosity. Their transparency allows you to play with light and color in a subtle and sophisticated way, creating works that captivate the eye and awaken the imagination. Main characteristics: Extremely pigmented. Matte finishes Vivid, fluid, and intense colors. It is not necessary to dilute it to use it with an airbrush or in calligraphy. Strong resistance to light. Compatible with all other GSW acrylic products and mediums. Wide range of opaque and transparent colors to meet various creative needs. Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PY110/PR122Finish: matteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Semi-transparent

    Nog 4 op voorraad

    €4,75

  • Acrylic Inks - Transparent Cold Green 30ml Acrylic Inks - Transparent Cold Green 30ml

    GreenStuffWorld Acrylic Inks - Transparent Cold Green 30ml

    Nog 5 op voorraad

    Acrylic Ink tranparant GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects. These inks offer exceptional versatility, allowing the creation of highly concentrated and intense colors when applied undiluted. Their high-quality pigmentation ensures that the colors maintain their vividness and strength. On the other hand, by diluting the inks, rich color transparencies are achieved that add depth and subtlety to compositions. This ability of acrylic ink to adapt to different techniques and artistic styles makes it a preferred choice for a wide variety of creative projects. The product comes in a glass bottle with a dispensing pipette, which allows you to precisely contour each drop of pigment to control the amount and intensity of the mixtures you work with, giving you the freedom to bring your visions to life with unparalleled clarity and precision. With acrylic inks, you can create everything from color filters to powerful effects of depth and luminosity. Their transparency allows you to play with light and color in a subtle and sophisticated way, creating works that captivate the eye and awaken the imagination. Main characteristics: Extremely pigmented. Matte finishes Vivid, fluid, and intense colors. It is not necessary to dilute it to use it with an airbrush or in calligraphy. Strong resistance to light. Compatible with all other GSW acrylic products and mediums. Wide range of opaque and transparent colors to meet various creative needs. Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PY110/PR122Finish: matteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Semi-transparent

    Nog 5 op voorraad

    €4,75

  • UV resin 17ml Green - Glow in the Dark

    GreenStuffWorld UV resin 17ml Green - Glow in the Dark

    Nog 3 op voorraad

    Glow in the dark Acrylic Resin that gets cured under ultraviolet (UV) or direct sunlight in minutes. Perfect to replicate different magical, toxic or ghostly effects. Contains: 17ml *Check the colours of the example photos in natural light and in the dark when uploaded, as they may be different. CAUTION: Keep out of reach of children. May be harmful if swallowed. Not edible. Causes Skin Irritation. Causes serious eye irritation. May cause an allergic skin reaction. Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize. UV resin warnings - Environmental conditions can affect the properties of the material- Use in a dry, ventilated place and at a temperature between 18 ° C and 25 ° C is recommended. Extreme cold and heat can damage the material.- Use under inadequate conditions, inadequate exposure to UV light or insufficient UV light output can result in the surface feeling tacky after curing. In this case, we recommend applying more UV light or gloss varnish.- We recommend consuming the product within 10 months. The shelf life of the product may decrease after opening depending on the state of preservation, exposure to UV light and low temperatures. Ideaal voor dobbelstenen, scenery en diorama op bases. #resin #glow #dark #greenstuffworld #green

    Nog 3 op voorraad

    €4,50

  • UV resin 17ml Lime Green - Glow in the Dark

    GreenStuffWorld UV resin 17ml Lime Green - Glow in the Dark

    Nog 4 op voorraad

    Glow in the dark Acrylic Resin that gets cured under ultraviolet (UV) or direct sunlight in minutes. Perfect to replicate different magical, toxic or ghostly effects. Contains: 17ml *Check the colours of the example photos in natural light and in the dark when uploaded, as they may be different. CAUTION: Keep out of reach of children. May be harmful if swallowed. Not edible. Causes Skin Irritation. Causes serious eye irritation. May cause an allergic skin reaction. Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize. UV resin warnings - Environmental conditions can affect the properties of the material- Use in a dry, ventilated place and at a temperature between 18 ° C and 25 ° C is recommended. Extreme cold and heat can damage the material.- Use under inadequate conditions, inadequate exposure to UV light or insufficient UV light output can result in the surface feeling tacky after curing. In this case, we recommend applying more UV light or gloss varnish.- We recommend consuming the product within 10 months. The shelf life of the product may decrease after opening depending on the state of preservation, exposure to UV light and low temperatures. Ideaal voor dobbelstenen, scenery en diorama op bases. #resin #glow #dark #greenstuffworld #lime #green

    Nog 4 op voorraad

    €4,50

  • Coral Touch Dry Brush 30 ml

    GreenStuffWorld Coral Touch Dry Brush 30 ml

    Nog 6 op voorraad

    Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #coral #touch

    Nog 6 op voorraad

    €3,75

  • Butter Yellow Dry Brush 30 ml

    GreenStuffWorld Butter Yellow Dry Brush 30 ml

    Nog 6 op voorraad

    Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #butter #yellow

    Nog 6 op voorraad

    €3,75

  • Courage Mauve Dry Brush 30 ml

    GreenStuffWorld Courage Mauve Dry Brush 30 ml

    Nog 6 op voorraad

    Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #courage #mauve

    Nog 6 op voorraad

    €3,75

  • Blue Wolf Touch Dry Brush 30 ml

    GreenStuffWorld Blue Wolf Touch Dry Brush 30 ml

    Nog 4 op voorraad

    Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #blue #wolf #touch

    Nog 4 op voorraad

    €3,75

  • Raptor Green Dry Brush 30 ml

    GreenStuffWorld Raptor Green Dry Brush 30 ml

    Nog 5 op voorraad

    Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #raptor #green

    Nog 5 op voorraad

    €3,75

  • Dry Puke Green Dry Brush 30 ml

    GreenStuffWorld Dry Puke Green Dry Brush 30 ml

    Nog 4 op voorraad

    Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #dry #puck #green

    Nog 4 op voorraad

    €3,75

Paints all products

Login

Wachtwoord vergeten?

Heb je nog geen account?
Maak gratis een account aan en geniet van vele voordelen.