Vormend Materiaal all products

- 50º Shore-A hardness- Color: Violet- 1A:1B mix ratio, mixed by hand- 2.5 minutes pot life- 10 minutes cure time- Ovenable up to 150ºC- Non edible Silicone Putty 200gr. Green Stuff World Silicone Putty is platinum silicone that can be easily mixed and applied by hand. Mix it in equal amounts (1A:1B) by volume. Green Stuff World Silicone Putty has a pot life of 2.5 minutes with a cure time of 10 minutes. Shrinkage is very low (0.03%) and when cured is exceptionally strong and durable (tear strength 6 N/mm). It will resist temperatures up to 150ºC. Other applications include making fast mold impressions from almost any surface, orthotics, jewelry making and more. The cure of the silicone putty may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern or a total lack of cure throughout the mold. Wear vinyl gloves only, since Latex gloves will inhibit the cure of the rubber. Also, tin-cure silicone, sulfur clays, certain wood surfaces, newly cast polyester resin, epoxy or urethane rubber may cause inhibition. If compatibility between the silicone rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the cure time has passed. (i) This set contains 200gr. of Green Stuff World Silicone Putty (100gr PartA + 100gr PartB) #greenstuffworld #putty #mold #making #silicone

Lees meer minder

UV Putty GSW UV Putty is a specialized one-component putty designed for finishing small unevenness and gap filling in various surfaces such as metal, resins, and plastics. It is particularly suitable for smart and spot repairs as well as gap-filling on miniatures and other models. The UV putty filler comes in a light-resistant aluminum jar, ensuring its stability and protection from light sources and direct sunlight. Here are the key features, benefits, and technical data of the product: This is a 1-component material, since it comes as a single-component product, eliminating the need to add a hardener or any additional components before application. UV-resistant aluminum jar: It is delivered in an ultraviolet-resistant aluminum jar, ensuring the product's stability and preventing premature curing from exposure to ultraviolet light. Finishing small unevenness: It is specifically formulated to address and smooth out even the tiniest micro-holes or irregularities in the surfaces of your models. Benefits: Ready to use: As a one-component material, it is ready to use straight from the jar, saving you time and effort compared to mixing multiple components. Smooth application: You can apply it using a paint brush or palette knife, allowing for precise and controlled application. Effective gap filling: It is specially designed to fill gaps and uneven areas, ensuring a seamless finish on your models. Layering capability: Multiple thin layers can be applied consecutively without waiting for each layer to fully cure, allowing for efficient and convenient application. Super Quick curing: The curing time depends on the distance from the ultraviolet light source and the thickness of each layer. Using the GSW ultraviolet torch, It can be dried promptly for further processing. Immediate processing: Once is cured, it is ready for further processing such as sanding, painting, or other model finishing techniques. Instructions of Use Clean the surface of dust and dirt. Apply the putty filler with a spatula, paintbrush, sculpting tool, or silicone shaper to achieve precise results. Wipe off excess product, and smooth it with alcohol. Cure with ultraviolet light at a distance of 1 cm for 15 seconds. Once it is cured, it can be sanded, polished, and drilled as needed. Technical data: Color: It has a semi-translucent color, which can be advantageous for achieving a natural appearance on various surfaces. Storage: It is recommended to store it between 7°C and 25°C, ensuring it is kept inside its aluminum jar protected from ultraviolet light sources and direct sunlight. Shelf life: Shelf life of 12 months, ensuring its usability over an extended period. Overall, a UV putty filler from Green Stuff World product offers a convenient and effective solution for finishing small unevenness on miniatures and small models. Its one-component nature, smooth application, and quick curing time make it a user-friendly choice for modelers and hobbyists. Content: 50ml #ultra #violet #putty #light #curing #uv

Lees meer minder