Products

Splatter Effects Dirt has been formulated to create splatter effects and textures on vehicles, dioramas and vignettes. It has just the right consistency to apply in various strategic areas and on the underside of vehicles. It is easy to handle with the brush, creating realistic textures of accumulated dirt. Can be applied with a wet brush. Ideal for adding the finishing touches of texture to the underside of your model or terrain. Can be splattered using a brush and stick or by directing the airflow of your airbrush over the brush to project it onto an area. Can be thinned with water or an acrylic thinner to improve its flow. Close tightly to keep it for a longer time.

Read more less

Splatter Dry Mud has been formulated to create dry mud splatter effects on vehicles, dioramas and vignettes. Dry Mud has just the right consistency; easily handled with the brush, creating realistic dry mud splatter textures on the underside surfaces of vehicles has never been easier. Ideal for adding the finishing touches of texture to the underside of your model or terrain. Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area. It can be thinned with water or an acrylic thinner to improve its fluidity. Non-toxic.

Read more less

Special effects for splashes on vehicles, dioramas and vignettes. Its composition allows an easy handling with brush achieving a very realistic texture and effect on the lower parts of the vehicles. Special consistency for splash effects. Ideal for adding the finishing touches of texture to the underside of your model or terrain. Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area. It can be thinned with water or an acrylic thinner to improve its fluidity. Non-toxic.

Read more less

Splatter Wet Ground has been formulated to create wet ground splatters and build-up on vehicles, dioramas and vignettes. Wet Ground has just the right consistency; it handles easily with the brush, creating realistic textures of wet soil build-up and dirt on the undersurfaces of vehicles has never been easier. Ideal for adding the finishing touches of texture to the underside of your model or terrain. Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area. It can be thinned with water or an acrylic thinner to improve its fluidity. Non-toxic.

Read more less

Splatter Wet Mud has been formulated to create wet mud splatter effects on vehicles, dioramas and vignettes. Splatter Wet Mud has just the right consistency; easily handled with the brush, creating realistic wet mud splatter textures on the undersurfaces of vehicles has never been easier. Ideal for adding the finishing touches of texture to the underside of your model or terrain. Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area. It can be thinned with water or an acrylic thinner to improve its fluidity. Non-toxic.

Read more less

What is filler primer spray? Spray Filler, also known as Primer Filler or Spray Putty (Surface Thick Primer | Spray Putty | Primer Filler), is a type of high-density primer used to level, and fill imperfections and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines in 3D prints, and small irregularities in materials such as plastic, resin, metal, wood, and EVA Foam. In cosplay, the spray filler is essential for preparing armor and props before the final paint job, ensuring a smooth and even surface. It is also used on pieces made with 3D printing in PLA, facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding. Thanks to its filling and smoothing capacity, it is an essential product for those seeking professional finishes in the creation of props, miniatures, car and bike repairs, and their helmets, as well as models and detailed pieces in any craft project. Content: 1x 400ml How to use filler primer spray? Surface Preparation: The surface must be clean, dry, and free of dust, grease, or debris. If smooth or glossy, sand lightly with fine sandpaper (400-600) to improve adhesion. Product Agitation: Shake the aerosol well for at least 2 minutes before use. Test on a disposable surface to check flow and texture. Application Conditions: Use at a temperature between 10°C and 25°C and humidity below 65%. Do not apply in windy, extremely cold, or high-humidity conditions. Spray Application: Hold the spray at a 15-20 cm distance. Apply in thin, uniform coats with smooth, steady strokes. Wait 5-10 minutes between coats before reapplying. Drying and Finishing: Dry to the touch in 30 minutes. Complete drying in 24 hours. For a more uniform finish, sand lightly before painting. Spray Cleanup: After use, invert the sprayer and press the valve for a few seconds to clean the nozzle. WARNINGS Keep out of children's reach. Keep away from heat/sparks / open flames / hot surfaces. Do not spray on an open flame or another source of ignition. Do not pierce or burn, even after use. Keep the recipient hermetically sealed. IN CASE OF INHALATION: Remove the person to fresh air and keep him in a position that facilitates breathing. IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.

Read more less

MATT Protection Sealings High-quality varnishes to get an amazing sealing with non-yellowing properties. Ultra-resistant and with the best adherence IMPORTANT: Matt varnishes sprays could whiten in the case are not applied correctly. They are highly loaded sprays so you should not apply more than 2 coats. It should be applied with movements from left to right without concentrating on any point.In 99% of cases, 1 layer from left to right and another from right to left is more than enough. INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Do not apply too much paint in one spot to avoid "eyecat effect" and dripping. This type of paint should be applied with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. - Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #black #gloss #primer #400ml

Read more less

Gloss Primer White 400ml Gloss White Primer Paint with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent gloss finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children's reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove the person to fresh air and keep him in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.

Read more less

SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #black #primer #400ml

Read more less

SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #grey #primer #400ml

Read more less

SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #ochre #primer #400ml

Read more less

SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor. #greenstuffworld #matt #white #primer #400ml

Read more less

SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.  

Read more less

Statisch Gras Green Stuff World's statisch gras heeft een realistisch kleur en is van de hoogste kwaliteit. Speciaal ontwikkeld om de bases van je miniaturen mee te bewerken, voor scenery of terrein. Gebruik witte PVA lijm, green stuff world tufts lijm of een statisch geladen apparaatje (flock box bijv) om de sprietjes omhoog te krijgen. Dit statisch gras is verpakt in handige potjes van 200ml zodat je je werkplek netjes kan houden, gras niet overal heen ontsnapt etc. De hoeveelheid is voldoende om de voeten van 1 of 2 fracties te kietelen dan wel een een dubbele A4 met een flinke laag te voorzien. Grasspriet hoogte: 2-3 mm Kleur: spring grass Static Grass Green Stuff World's static grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The static grass flock is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml spring grass #static #grass #flock #greenstuffworld #200ml #spring #grass

Read more less

Statisch Gras Green Stuff World's statisch gras heeft een realistisch kleur en is van de hoogste kwaliteit. Speciaal ontwikkeld om de bases van je miniaturen mee te bewerken, voor scenery of terrein. Gebruik witte PVA lijm, green stuff world tufts lijm of een statisch geladen apparaatje (flock box bijv) om de sprietjes omhoog te krijgen. Dit statisch gras is verpakt in handige potjes van 200ml zodat je je werkplek netjes kan houden, gras niet overal heen ontsnapt etc. De hoeveelheid is voldoende om de voeten van 1 of 2 fracties te kietelen dan wel een een dubbele A4 met een flinke laag te voorzien. Grasspriet hoogte: 4-6 mm Kleur: spring grass Static Grass Green Stuff World's static grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The static grass flock is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml spring grass #static #grass #flock #greenstuffworld #200ml #spring

Read more less

Statisch Gras Green Stuff World's statisch gras heeft een realistisch kleur en is van de hoogste kwaliteit. Speciaal ontwikkeld om de bases van je miniaturen mee te bewerken, voor scenery of terrein. Gebruik witte PVA lijm, green stuff world tufts lijm of een statisch geladen apparaatje (flock box bijv) om de sprietjes omhoog te krijgen. Dit statisch gras is verpakt in handige potjes van 200ml zodat je je werkplek netjes kan houden, gras niet overal heen ontsnapt etc. De hoeveelheid is voldoende om de voeten van 1 of 2 fracties te kietelen dan wel een een dubbele A4 met een flinke laag te voorzien. Grasspriet hoogte: 9-12 mm Kleur: spring grass Static Grass Green Stuff World's static grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The static grass flock is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml spring grass #static #grass #flock #greenstuffworld #200ml #spring #grass

Read more less

Magnetic Sheet  - SELF ADHESIVE Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Magnetic Sheet  - SELF ADHESIVE Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Magnetic Sheet  - SELF ADHESIVE Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Magnetic Sheet  - SELF ADHESIVE Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Magnetic Sheet  - SELF ADHESIVE Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Green Stuff World's Squishy D20 Dice is the perfect accessory for any fan of role-playing games, wargames, and geek culture in general. Made of soft-touch injected foam, it combines bold colors and themed decoration to become a fun piece for both your desk and your gaming table. Measuring 8 cm tall, it is designed to fill your entire hand and offer a very satisfying feeling when squeezed. Its flexible material quickly regains its shape, ideal for releasing tension between rolls, during long games, or simply to keep your hands busy while planning your next adventure. And yes: it's also the perfect “dramatic device” for those moments of epic frustration. When you miss that hit roll for the umpteenth time, you can “threaten” to throw it at your best friend's head... and when you roll a 1 on the most important roll of the night, there's always the option of throwing it against a wall to let off steam. Don't worry: since it's foam, the idea is that it's a harmless and safe joke, with no drama or damage, just laughter and instant geek therapy. In addition to being stress-relieving, it's an original gift for gamers, collectors, and dice lovers. Use it as a decorative element, a geeky detail for your setup, or an inseparable companion in your sessions: a giant D20 that attracts attention, relaxes you with a good squeeze, and helps you survive the tyranny of the dice. Contents: 1x

Read more less

Green Stuff World's Squishy D20 Dice is the perfect accessory for any fan of role-playing games, wargames, and geek culture in general. Made of soft-touch injected foam, it combines bold colors and themed decoration to become a fun piece for both your desk and your gaming table. Measuring 8 cm tall, it is designed to fill your entire hand and offer a very satisfying feeling when squeezed. Its flexible material quickly regains its shape, ideal for releasing tension between rolls, during long games, or simply to keep your hands busy while planning your next adventure. And yes: it's also the perfect “dramatic device” for those moments of epic frustration. When you miss that hit roll for the umpteenth time, you can “threaten” to throw it at your best friend's head... and when you roll a 1 on the most important roll of the night, there's always the option of throwing it against a wall to let off steam. Don't worry: since it's foam, the idea is that it's a harmless and safe joke, with no drama or damage, just laughter and instant geek therapy. In addition to being stress-relieving, it's an original gift for gamers, collectors, and dice lovers. Use it as a decorative element, a geeky detail for your setup, or an inseparable companion in your sessions: a giant D20 that attracts attention, relaxes you with a good squeeze, and helps you survive the tyranny of the dice. Contents: 1x

Read more less

Green Stuff World's Squishy D20 Dice is the perfect accessory for any fan of role-playing games, wargames, and geek culture in general. Made of soft-touch injected foam, it combines bold colors and themed decoration to become a fun piece for both your desk and your gaming table. Measuring 8 cm tall, it is designed to fill your entire hand and offer a very satisfying feeling when squeezed. Its flexible material quickly regains its shape, ideal for releasing tension between rolls, during long games, or simply to keep your hands busy while planning your next adventure. And yes: it's also the perfect “dramatic device” for those moments of epic frustration. When you miss that hit roll for the umpteenth time, you can “threaten” to throw it at your best friend's head... and when you roll a 1 on the most important roll of the night, there's always the option of throwing it against a wall to let off steam. Don't worry: since it's foam, the idea is that it's a harmless and safe joke, with no drama or damage, just laughter and instant geek therapy. In addition to being stress-relieving, it's an original gift for gamers, collectors, and dice lovers. Use it as a decorative element, a geeky detail for your setup, or an inseparable companion in your sessions: a giant D20 that attracts attention, relaxes you with a good squeeze, and helps you survive the tyranny of the dice. Contents: 1x

Read more less

The stackable tournament tray for miniatures from Green Stuff World is a transport and storage system designed to move miniatures neatly from game to game within a tournament, as well as between the storage area and the gaming table at home or at your club. Its design is optimized for use with magnetized miniatures, making it easy to position and move them during games, events, or tournaments. The base of this stackable tray is metalized, ensuring the figures remain secure on the surface during transport. This feature helps prevent unwanted movement when moving the Warhammer tray from one place to another and keeps the miniatures in their original arrangement without having to handle them individually each time their position is changed. This stackable tournament tray requires assembly and features thick side handles integrated into the structure itself, designed to facilitate a secure grip during manual transport and provide a more stable hold when lifting or moving the tray. We recommend using PVA glue for assembly; once assembled, the tray cannot be disassembled, enhancing its structural integrity and durability while preventing the loss of set components. Multiple transport trays can be stacked on top of one another, allowing you to organize miniatures by faction, army, project, or game system within a shelf, cabinet, or workspace. This feature also makes it easier to move several trays at once from storage to the gaming table, especially when working with multiple groups of miniatures or entire armies. The structure is made of black MDF, a material commonly used in organization and modeling accessories due to its balance between rigidity and weight. The black finish provides a uniform and discreet appearance, allowing it to blend visually with other storage elements, painting stations, or hobby furniture. The choice of this material also helps maintain a stable construction without resorting to complex components. The product is designed for easy assembly. The parts snap together quickly, allowing the transport tray to be ready for use in no time. Once assembled, the tray can be used both as a temporary stand during games and as a more permanent storage solution at home. Its design allows miniatures to remain in place and ready to be moved when necessary. These stackable Warhammer trays are used to transport miniatures between different tables during tournaments or gaming sessions, particularly Warhammer 40k tournaments, though they are especially useful in home settings, allowing entire units to be kept together on a single tray. This helps prevent individual transfers and accidents, simplifies pre-game organization, and reduces direct handling of painted miniatures. Contents: 1 tournament tray + 2 adhesive metalized rubber sheets for magnetized miniaturesUsable area: 300x420mm (11.8 x 16.53 inches)

Read more less

The stackable tournament tray for miniatures from Green Stuff World is a transport and storage system designed to move miniatures neatly from game to game within a tournament, as well as between the storage area and the gaming table at home or at your club. Its design is optimized for use with magnetized miniatures, making it easy to position and move them during games, events, or tournaments. The base of this stackable tray is metalized, ensuring the figures remain secure on the surface during transport. This feature helps prevent unwanted movement when moving the Warhammer tray from one place to another and keeps the miniatures in their original arrangement without having to handle them individually each time their position is changed. This stackable tournament tray requires assembly and features thick side handles integrated into the structure itself, designed to facilitate a secure grip during manual transport and provide a more stable hold when lifting or moving the tray. We recommend using PVA glue for assembly; once assembled, the tray cannot be disassembled, enhancing its structural integrity and durability while preventing the loss of set components. Multiple transport trays can be stacked on top of one another, allowing you to organize miniatures by faction, army, project, or game system within a shelf, cabinet, or workspace. This feature also makes it easier to move several trays at once from storage to the gaming table, especially when working with multiple groups of miniatures or entire armies. The structure is made of black MDF, a material commonly used in organization and modeling accessories due to its balance between rigidity and weight. The black finish provides a uniform and discreet appearance, allowing it to blend visually with other storage elements, painting stations, or hobby furniture. The choice of this material also helps maintain a stable construction without resorting to complex components. The product is designed for easy assembly. The parts snap together quickly, allowing the transport tray to be ready for use in no time. Once assembled, the tray can be used both as a temporary stand during games and as a more permanent storage solution at home. Its design allows miniatures to remain in place and ready to be moved when necessary. These stackable Warhammer trays are used to transport miniatures between different tables during tournaments or gaming sessions, particularly Warhammer 40k tournaments, though they are especially useful in home settings, allowing entire units to be kept together on a single tray. This helps prevent individual transfers and accidents, simplifies pre-game organization, and reduces direct handling of painted miniatures. Contents: 1 tournament tray + 3 adhesive metalized rubber sheets for magnetized miniaturesUsable area: 300x630 mm (11.81 x 24.80 inches)

Read more less

Various goodies for all of us! Let your weary legs find respite as we unveil the magnificent stagecoach, exquisitely presented for your convenience. Within its confines, you can effortlessly accommodate all your belongings and more. Moreover, our impeccably trained horse shall faithfully guide you to your desired destination. Say goodbye to your transportation worries! 28-32mm scale Contents: 1x Drag Horse 1x Stagecoach Please Note: Miniatures are supplied unpainted and some assembly will be required. #RPG #terrain #modular #set #32mm #D&D #E5 #compatible #boardgame #stage #coach

Read more less

A staple of western movies for decades, the stagecoach is as integral a part of the Wild West lexicon as the cowboy, the saloon, and the gunfight. Supplied unassembled and unpainted in kit form with full instructions. Any models or accessories shown are for scale purposes only and are not included. Dimensions L80 x W50 x H60mm Product Features Laser etched detail Material MDF Contents 1x Stagecoach

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less