GreenStuffWorld

Portable Paint station for miniatures and scale modelsMeet the ultra-compact Green Stuff World Portable Paint Station, a lightweight, travel-ready workstation designed for miniature painters, scale modelers, and hobby crafters who want maximum organization in minimum space. Its base footprint is optimized to just 30×30 cm, yet it unfolds into a surprisingly complete setup—perfect for home desks, painting sessions with friends, hobby classes, and events. Despite the small size of this portable paint station, it unfolds into a complete setup in seconds, deploying two side shelves, a foldable A3 cutting mat, and a foldable silicone water cup. Everything is designed to maximize utility while keeping the overall weight low and the workflow tidy. For storage, it includes several drawers with clear acrylic (methacrylate) fronts so you can see everything inside at a glance, perfect for parts, materials for decorating bases, decals, magnets, spare blades, and other small essentials. It also features a dedicated foam shelf with capacity for 50 paint bottles (17/18 ml) to keep your basic colors stable and always at hand. Paint anywhere with confidence thanks to the included Flat LED light lamp (USB Type-C). With 108 LEDs (5V 2A) and a daylight color temperature of 6000K–6500K, it provides clear, consistent illumination to help you judge colors accurately and spot fine details. The lamp includes a 1.5 m black USB-C cable and features self-adhesive mounting for quick, secure placement on your setup. The included LED lamp can also be plugged into a power bank, so you’re not tied to a wall socket—turn your paint station into a truly mobile setup for painting outdoors in the park, at your hobby local club, during painting classes and workshops, at events, or anywhere else you want to enjoy the hobby on the go. The LED strip light is controlled by a dimmer that allows you to select up to 10 different brightness levels, so you can precisely adjust the amount of light to suit each situation: from soft lighting for ambiance or visual relaxation to more powerful lighting for detailed work. Built for travel, perfectly compatible as a Warhammer painting station, the entire station packs neatly into a compact carry case made from lightweight, hard-wearing, padded Oxford fabric for long-term durability. The included cross-body strap makes it easy to carry to tournaments, workshops, or painting meetups without needing extra bags. Assembly is medium difficulty, and full instructions are included. Please note that any paints, brushes, tools, and miniatures shown in images are for illustration only, and we recommend using PVA glue to reinforce the joints of your assembly to make it sturdy. We do not recommend assembling wooden furniture with cyanoacrylate as the joints tend to come apart easily. Total weight: 3.25 kg (7 lb or 2.64 oz) Content: 1× Black Miniature painting station 2× Removable side shelves with 4x metallic surface for transporting miniatures with magnets1× Foldable A3 cutting mat1× Silicone collapsible cup 170ml with a wide base to prevent tip-oversMultiple drawers with transparent acrylic fronts2× Foam paint holders for 50× 17/18 ml bottles1× Flat LED lamp (USB Type-C, 108 LEDs, 6000K–6500K), self-adhesive mount, and 10 light intensities1x Black USB Type-C cable (1.5 m)

Read more less

GSW's Vivid Metal Colors series takes metallic finishes to another level, offering extraordinarily vivid, intense colors that are hard to find in the world of model making. These almost unique shades provide a striking metallic sheen thanks to their intense colors, adding a distinctive touch to any miniature, model, or scenery piece. Formulated with the highest quality ultra-fine pigments, these pearl-based metallic paints provide a truly stunning metallic effect, guaranteeing professional results even on small or highly detailed surfaces. Their coverage, combined with fast drying, allows you to work comfortably and efficiently. They can be combined with each other or with other paints and auxiliary products such as varnishes, although it is recommended to use gloss varnish, satin varnish, or our chrome varnish. They can also be combined with our range of Candy Inks or our range of Interference or Metal Filter paints: They can be used together with candy inks, due to their high transparency and shine, acting as color filters on metallic surfaces, gems, crystals, or lights, allowing you to modify and enhance the base metallic tone without losing definition. By applying a very thin layer of ink to the already painted metal, you can achieve unique color variations—intensifying reds, greens, blues, or intermediate shades—for vibrant and deep visual effects. They can also be used in conjunction with the range of metal filters, which provide reflections that change depending on the angle of the light, generating pearly or iridescent sparkles that transform the metallic finish into something much more dynamic. This combination allows you to create striking special effects, from armor with changing sparkles to details with an almost magical appearance, producing results that stand out both on the table and in the display case. The Vivid Metal Color series is water-based and completely non-toxic, and is optimized for use with both brushes and airbrushes. For optimal performance with an airbrush, we recommend starting with a 1:1 dilution with acrylic thinner. Each bottle includes a stainless steel ball to ensure a homogeneous mixture that is ready to use in seconds. Contents: 1 x 17 ml

Read more less

GSW's Vivid Metal Colors series takes metallic finishes to another level, offering extraordinarily vivid, intense colors that are hard to find in the world of model making. These almost unique shades provide a striking metallic sheen thanks to their intense colors, adding a distinctive touch to any miniature, model, or scenery piece. Formulated with the highest quality ultra-fine pigments, these pearl-based metallic paints provide a truly stunning metallic effect, guaranteeing professional results even on small or highly detailed surfaces. Their coverage, combined with fast drying, allows you to work comfortably and efficiently. They can be combined with each other or with other paints and auxiliary products such as varnishes, although it is recommended to use gloss varnish, satin varnish, or our chrome varnish. They can also be combined with our range of Candy Inks or our range of Interference or Metal Filter paints: They can be used together with candy inks, due to their high transparency and shine, acting as color filters on metallic surfaces, gems, crystals, or lights, allowing you to modify and enhance the base metallic tone without losing definition. By applying a very thin layer of ink to the already painted metal, you can achieve unique color variations—intensifying reds, greens, blues, or intermediate shades—for vibrant and deep visual effects. They can also be used in conjunction with the range of metal filters, which provide reflections that change depending on the angle of the light, generating pearly or iridescent sparkles that transform the metallic finish into something much more dynamic. This combination allows you to create striking special effects, from armor with changing sparkles to details with an almost magical appearance, producing results that stand out both on the table and in the display case. The Vivid Metal Color series is water-based and completely non-toxic, and is optimized for use with both brushes and airbrushes. For optimal performance with an airbrush, we recommend starting with a 1:1 dilution with acrylic thinner. Each bottle includes a stainless steel ball to ensure a homogeneous mixture that is ready to use in seconds. Contents: 1 x 17 ml

Read more less

Wargame trophies are awards designed to add value to any miniature or strategy game tournament. Each one consists of a high-quality ABS-like resin figure left unpainted, allowing full customization depending on the type of tournament and the theme of the event. In addition, each figure includes a square MDF base lacquered in black, with a smooth surface ideal for applying vinyls, engraved plates, or other commemorative texts. This makes every trophy a unique piece that not only recognizes the players’ efforts but also reinforces the identity and prestige of the championship. Unlike other generic awards, these trophies are created with the creative spirit of the hobby in mind. The option to paint them with metallic finishes, chrome effects, or even custom schemes inspired by each army turns them into true collector’s pieces. Whether for local leagues or large international tournaments, these trophies bring a special touch to the event, leaving players with a tangible memory of their participation and of the competitive atmosphere that defines the world of wargames. We offer 4 different models, so you can choose the one that best suits your competition. Contents: 1x resin trophy figure + Display plinth

Read more less

Wargame trophies  are designed to add value to any miniature or strategy game tournament. Each trophy features a high-quality, unpainted ABS-like resin figure, allowing for full customization according to the type of tournament or contest and the theme of the event. Additionally, each figure comes with a square black-lacquered MDF base with a smooth surface, perfect for applying vinyls, engraved plaques, or other commemorative texts. This makes every award a unique piece that not only acknowledges the players’ effort but also reinforces the identity and prestige of the championship. The Hand with Brush trophy, in particular, is intended as the main award for miniature painting contests. It recognizes the talent of the artist who presents the best-painted miniature, whether judged by technique, color combination, level of detail, or any other outstanding feature. Unlike generic prizes, these trophies are designed with the creative spirit of the hobby in mind. The possibility of painting them with metallic, chrome, or custom color finishes related to the event transforms them into true collector’s pieces. Whether in local leagues or major international contests, these trophies add a special touch to any event, leaving players with a tangible memento of their participation. Contents: 1x resin trophy figure +  Display plinth

Read more less

+1.000x 3D printed Warhammer skulls compatibleRevitalize your gaming experience with our exclusive bit collection, compatible with Warhammer bits, 3D printed resin piece sets that will transform both your battlefield and miniature bases into stunning scenery. Our online store specializes in offering details compatible with Warhammer skulls, all designed to be compatible with a variety of miniature games, including 9Age®, WH Fantasy®, WH40k®, and the recently reborn WH The Old World®. Precision manufactured from high-quality ABS-like resin for 3D printers using advanced 3D printing technology. Thanks to this technique, our pieces stand out for their level of detail, capturing realistic textures and shapes that bring a new dimension to your miniatures and modeling projects. From tiny bones to elaborate skeletons, each piece is designed to fit perfectly into your army, giving you the freedom to create and customize your figures to your liking. Whether you are a modeling enthusiast or an avid Wargames player, our bits will offer you an economical and effective way to customize your figures and create armies that truly reflect your style and vision. These battlefield trophies are delivered unpainted, and each set comes with its print matrix with easy-to-remove stands, making the assembly process easy and ensuring that you can get started on your creations without hassle. To make the assembly and customization process easier for you, you'll also find a selection of essential modeling tools in our store. From modeling glue for gluing to model paints for painting and ultra-flat precision modeling pliers, we have everything you need to give your pieces the perfect finish. These tools are specifically designed to work with resin and other surfaces used in model making, guaranteeing a precise cut and a clean assembly in every project. These products come unpainted and are perfect for 32-54 mm miniatures (1:48, 1:35). Each box includes +1.000x Resin skulls or Battlefield Trophies

Read more less

This set of resin Christmas decorations created by Green Stuff World has been specially designed to add a festive and magical touch to your dioramas, scenery, and miniature bases. Manufactured using 3D printing in ABS-like 3D resin, these pieces offer an exceptional level of detail that makes them a perfect complement to your modeling and wargaming projects. With this set, you can recreate fantasy-themed environments, from winter scenes to Christmas villages or decorated bases, adding personality and a unique style to your miniatures. The elements have been carefully designed in various shapes and sizes, allowing you to adapt the setting to different scales and creative needs. These resin bits are delivered unpainted, ready for you to customize to your liking with your favorite techniques and paints. They are ideal for 32–54 mm miniatures (1:48, 1:35) and are perfect for completing themed dioramas, Christmas projects, or any fantasy scene that requires a special touch. Each set includes a selection of fantasy Christmas decorations in resin, ready to use in your creations. Contents: x30

Read more less

Well wouldn't you like a present on your birthday? Even in a miniature scene we've got plenty to celebrate. Or add a festive and Christmas touch to your winter scenarios with the gift boxes set. Decorate your taverns, raiding dioramas, or magical scenes. It includes a wide variety of gifts so you can let your imagination run wild. All the gift boxes, printed in high-quality resin, are wrapped and feature a decorative bow. Furthermore, they come in different shapes: square, rectangular, round, and heart-shaped. They fit perfectly into wargaming environments, as there are gifts wrapped in the shapes of weapons and dynamite, and even one of the boxes has mutated and is alive! It has terrifying teeth and a long, porous, pointed tongue. The print quality is excellent, allowing minuscule details to be differentiated, which will provide your projects with a realism hard to find elsewhere. They are designed for 1:48/1:35 scales, come unpainted, and have easy-to-remove printing supports. Contents of the gift boxes set: Each set includes 22 assorted unpainted gift boxes resin bits.

Read more less

Add realism and detail to your roleplaying and wargaming scenarios with the Banquet food set. These miniature food pieces are perfect for customizing bases, tavern dioramas, or feast tables, among many other contexts, in any fantasy adventure. This set is ideal for themed dioramas and scenes that seek to enrich the visual narrative. Each piece is designed to evoke the authenticity and flavour of a medieval, fantasy, or real meal. 3D printed with high-quality resin, these miniatures accurately capture the shape and texture of different dishes, bringing an extra level of immersion to your modeling and wargaming projects. Make your characters enjoy a good plate before battle! Features: Meticulously detailed pieces, perfect for scenery, gaming tables, and diorama customization.Made from high-quality resin, ready to paint and adapt to any fantasy or historical theme.Includes a wide selection of dishes such as roast pig, pies, a still life, a cheese and charcuterie board, as well as individual plates of meat, fish, and soup.Pieces ready to use (unpainted), with simple-to-remove printing supports. Ideal for 1:48/1:35 scale, the most common standard in fantasy wargames. Contents of the Banquet food set: Each set includes 20 assorted unpainted Banquet food resin bits.

Read more less

Give your bases, dioramas, wargames, and miniatures dirty touch with these high-quality resin Trash Bags! Carefully designed to mimic actual trash and miscellaneous debris, they come in different shapes and sizes to accommodate different modeling scales.This product comes unpainted and is perfect for 32-54 mm miniatures (1:48, 1:35). Each set contains 10x Resin Trash Bags.

Read more less

WTC Glasspack Footprints Set 10th Edition compatible with Warhammer 40k® | 40k Footprints WTC Footprints compatible x10Green Stuff World's glasspack footprints are transparent 1 mm bases that precisely mark the footprint of buildings and ruins for games compatible with Warhammer 40,000® and WTC events. Made from fully transparent, flexible, and unbreakable glasspack plastic, they preserve your gaming mat’s aesthetics and won’t create edges that trip up your models. Each footprint has white printed edges to clearly show where the terrain piece begins and ends—no more arguments about line of sight or objective placement. These footprints work best on dark or grey mats, and are less recommended for very bright or snow-themed boards. Lightweight and easy to store in your army case, they’re the perfect solution for tournaments and meetups where quick setup and compact transport are key. Content: 10x size 6″×12″ Warhammer®, Warhammer 40,000®, and 40k® are registered trademarks of Games Workshop Limited. The products offered are not affiliated with, authorized by, or endorsed by any of these companies. Green Stuff World only manufactures and markets compatible products designed for use with these and other miniature lines.

Read more less

Magic Effects – Ice SpellsDiscover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects. Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects. Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity. Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints. Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale). Contents: x26

Read more less

Magic Effects – Energy WavesDiscover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects. Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects. Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity. Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints. Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale). Contents: x8

Read more less

Magic Effects – Ice WavesDiscover our collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects. Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects. Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity. Ideal for customizing heroes, wizards, monsters, or entire scenes, these effects are perfect for both modeling and wargamers looking to add drama and visual storytelling to their miniatures. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints. Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale). Contents: x8

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using Sculptor Vaseline (LINK). Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush (LINK) and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult. 

Read more less

Flexible sanding blocks are versatile tools, ideal for modelling, crafts, and cosplay. Made from 5 mm EVA foam, they provide a comfortable surface that easily conforms to hand curves and irregular areas. Their 100x80 mm size makes them easy to handle and suitable for both fine detail work and larger surfaces. Each Flexible Sanding Pad is coated with abrasive on one side only, allowing for more precise control without damaging the back. They come in various colours that indicate the grit level, making them easy to identify while working. They can be cut with scissors to adapt to specific shapes or angles. These blocks combine comfort, precision, and flexibility, making them essential for surface preparation and finishing work. Size: 100x80 mmGrit: #400Contents: 5x

Read more less

Flexible sanding blocks are versatile tools, ideal for modelling, crafts, and cosplay. Made from 5 mm EVA foam, they provide a comfortable surface that easily conforms to hand curves and irregular areas. Their 100x80 mm size makes them easy to handle and suitable for both fine detail work and larger surfaces. Each Flexible Sanding Pad is coated with abrasive on one side only, allowing for more precise control without damaging the back. They come in various colours that indicate the grit level, making them easy to identify while working. They can be cut with scissors to adapt to specific shapes or angles. These blocks combine comfort, precision, and flexibility, making them essential for surface preparation and finishing work. Size: 100x80 mmGrit: #280Contents: 5x

Read more less

Flexible sanding blocks are versatile tools, ideal for modelling, crafts, and cosplay. Made from 5 mm EVA foam, they provide a comfortable surface that easily conforms to hand curves and irregular areas. Their 100x80 mm size makes them easy to handle and suitable for both fine detail work and larger surfaces. Each Flexible Sanding Pad is coated with abrasive on one side only, allowing for more precise control without damaging the back. They come in various colours that indicate the grit level, making them easy to identify while working. They can be cut with scissors to adapt to specific shapes or angles. These blocks combine comfort, precision, and flexibility, making them essential for surface preparation and finishing work. Size: 100x80 mmGrit: #180Contents: 5x

Read more less

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #2500Contents: 5x

Read more less

Professional high-quality wet sandpaper for modeling, craft, DIY, and restoration works. These wet sandpapers have been impregnated with a synthetic abrasive on a waterproof base for wet sanding hand-works. Moisten the sandpaper with water or other lubricant and work on a wet surface, so it will prevent the surface from getting rough. For a perfect sanding/polishing of your models and miniatures, and combine different numbers progressively progressing from thickest grains (lower numbers) to finer grains (higher numbers), achieving an extraordinarily smooth and even finish. Easy to cut with scissors to use in different sizes, and also to adapt to other sanding tools.

Read more less

Professional high-quality wet sandpaper for modeling, craft, DIY, and restoration works. These wet sandpapers have been impregnated with a synthetic abrasive on a waterproof base for wet sanding hand-works. Moisten the sandpaper with water or other lubricant and work on a wet surface, so it will prevent the surface from getting rough. For a perfect sanding/polishing of your models and miniatures, and combine different numbers progressively progressing from thickest grains (lower numbers) to finer grains (higher numbers), achieving an extraordinarily smooth and even finish. Easy to cut with scissors to use in different sizes, and also to adapt to other sanding tools.

Read more less

The Green Stuff World hand sandpaper holder or hand sanding block is a sturdy yet lightweight tool, 3D printed in high-strength PLA, and offers the ultimate solution for achieving flawless surfaces in scale modeling, wargaming, dioramas, and cosplay. Its ergonomic design provides a comfortable and precise grip, allowing for both rough sanding and fine polishing on miniatures, 3D-printed parts, or EVA foam armor. Available in two versions — flat and curved — the holder adapts to any geometry: straight vehicle edges, organic scenic-base contours, or pronounced curves on helmets and pauldrons. The internal clamp keeps wet- or dry-sandpaper sheets perfectly taut and wrinkle-free, whatever the grit thickness. Its width matches exactly half a sheet of Green Stuff World’s standard sandpaper, maximising the use of every sheet; nevertheless, it can be used with paper from any other brand, making it a versatile, indispensable addition to your workbench. Dimensions: 45 mm wideSurface: CurvedContents: 1 ×

Read more less

Resin Traffic Cones 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 32 mm (1:48) miniatures. Scale: 1:48Content: 10x 

Read more less

Foam Sanding Pads Coarse grit (400) Hobby foam sandpaper pads are available in different grits and they are valid either for rough or fine sanding. Each grit is marked with a different color and made of soft and flexible EVA foam which makes them perfect for sanding curved edges as well as to be cut into any size or shape allowing to reach the most difficult areas. Measurements: 70x18 mmThis set includes 10 pieces

Read more less

Printed Mailboxes (pack x14) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 8x10x3mm - 12x23x12mmScale: 1:58 - 1:48Content: 14x

Read more less

Shopping Carts (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 40x35x30mmScale: 1:58 - 1:48Content: 2x Shopping Carts

Read more less

Waiting Park Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45x25x24mmScale: 1:58 - 1:48Content: 2x

Read more less

Waiting Church Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 54 x 24 x 30mmScale: 1:58 - 1:48Content: 2x

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Miniature Windows - Industrial Arched 2 - Large Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 equal packs

Read more less

Miniature Windows - Classic Arched - Large Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Read more less

Miniature Windows - Classic (small) Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Read more less

Miniature Windows - Basic Square (small) Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Read more less