GreenStuffWorld
Water Effect Gel Turquoise 250ml
Water effect Gel - 250ml Transparent acrylic gel specially designed to replicate moving water, waves, and splashes with a realistic finish. It is perfect to achieve a depth effect as well as a realistic watercolor which makes it ideal for naval dioramas or for scenery with smaller aquatic features such as river streams and puddles. Splash gel dries in 24 hours, although it could be more or less depending on the thickness of the application.The texture is thick enough to be poured onto all kinds of surfaces, even slopes. It is recommended to apply in thin layers, adding multiple layers if necessary. You can model the surface while it dries using old brushes, sculpting tools, or toothpicks to create water wave crests, waterfalls, and rough seas, among others. It can be diluted either with water or acrylic thinner to change the consistency and mix it with other products of the same range or small amounts of acrylic inks to slightly change the color. Content: 250ml #water #gel #effect #greenstuffworld #splash #250ml #turquoise
€9,00
-
Candy Ink Citrine Yellow (17ml)
Candy Inks GSW's range of Candy Inks. Their excellent brightness and transparency allow them to be used for colour filters for modifying metals, gems, glass, lights, visors... or any other parts which you would want to intensify their colours. Dries fast for a gloss and smooth finish. Can be applied by brush and airbrush.- Applying by brush will yield a lacquered and intense finish. It must be left to dry completely and big cumulations of paint should be avoided, as this will affect their properties.- If using an airbrush, the colour filters will be thinner and can be used to modify the chameleon colours, as well as for other metallic or transparent effects. Contains: 17 ml examples with metallic paint *NOTE: Do not use this paint with alcohol based thinners as it damages the paint and could clog the airbrush. The GSW thinner and airbrush cleaner are perfectly compatible with this paint. #candy #ink #Citrine #Yellow #greenstuffworld
€2,85
-
Fluor pigment Orange (30ml)
Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #orange #fluor #pigment #greenstuffworld #30ml
€3,75
-
Fluor pigment Purple (30ml)
Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #purple #fluor #pigment #greenstuffworld #30ml
€3,75
-
Fluor pigment White (30ml)
Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #white #fluor #pigment #greenstuffworld #30ml
€3,75
-
Fluor pigment Magenta (30ml)
Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #magenta #fluor #pigment #greenstuffworld #30ml
€3,75
-
Long Grass Flock 100mm - Light Brown
Long Grass Flock 100mm Long grass flock from Green Stuff World is realistic and of high-quality Model Realistic Field Grass. Designed to decorate the bases of your miniatures of your scenery creating model tall grass, weeds, and other wild grasses found in woodlands, wetlands, prairies, and other places in nature. To use the product simply cut the desired size, apply white glue and/or instant glue to the grass, and apply it to the surface. We recommend mixing different colours to achieve a more realistic result on your dioramas and bases. Content: approx. 7gr Length: 100mm Colour: light brown
€4,75
-
Waterslide Laser Decal Sheets Transparant
Waterslide DecalsPrint your own waterslide decals with this set of 5 sheets of printable decal paper. Decals are to be applied with water, no solvent required. You can also use some GSW Decal Softener and GSW Decal Fixer solutions to improve and protect the finish on uneven or rough surfaces. Use a computer to create your artwork, because copiers and printers cannot print white, they rely on the paper itself to supply the white component in lettering and artwork. To make a decal with white lettering and/or artwork, you would start with white film decal paper. Choose the proper type of paper according to your printer type, inkjet paper or laser paper. Remove any tissue-type sheet protector that may be present in the printable paper, and print that artwork directly onto the glossy side of the decal paper. For inkjet printing, we recommend using the "Transparency Plastic Film" (or foils) setting if your printer software supports this option. In all cases, you must immediately apply a few thin, but thorough, coats of fixative spray LINK to seal the printed image on the decal paper that will prevent ink from smearing, washing off, cracking or chipping during application.Sheets: 5 per packageSize: 210 x 270mm (A4)BASIC INSTRUCTIONS1.- Cut the decal out as close as you can to the outer edge of the image. For better results, use a brand new blade in your cutter.2.- Pick the decal up with your tweezers and let your decal soak in water for about 20 seconds. Warm water may help with this process.3.- Use a paintbrush to gently push the decal off the sheet and onto the model. That's all folks!ADVANCED INSTRUCTIONS4.- Before applying it to the model, once the decal has soaked long enough, apply a bit of GSW Decal Fixer to the surface of the model where you are planning to set your decal. GSW Decal Fixer protects the paint beneath and smooths the surface, thereby helping to prevent silvering. Use a paintbrush to gently push the decal off the sheet and onto the model. If it is hard to move the decal around, adding bit more GSW Decal Fixer or water will help the decal float on the surface until it is positioned correctly.5.- If the surface where you want to apply the flat decal is curved, like a shoulder pad, your decal could become wrinkled. To avoid this, once your decal is in place, apply GSW Decal Softener. Let the softener react and it will help remove wrinkles, as it adapts to the curved surface underneath. Repeat this step 2-3 times till wrinkles are removed.Remove any excess with a cotton swab to remove the liquid caught between the decal and the surface. Roll the swab over the decal so it does not lift from the surface. You can also use a paper towel to press down on the decal in a rolling motion to remove the excess of liquids. By using GSW Decal Softener the relief cuts to remove wrinkles in your decal will not be needed.6.- Finally apply GSW Decal Fixer again to the decal and the surface of the model where we have been working to unify the surface. Coat it as normal with matt or gloss varnish if you consider it necessary to remove or add a glossy finish. Decal stickers vellen Print je eigen decal-emblemen met deze set van 5 vellen bedrukbaar decalpapier. Decals moeten met water worden aangebracht, geen oplosmiddel nodig. U kunt ook enkele GSW Decal Softener en GSW Decal Fixer-oplossingen gebruiken om de afwerking op oneffen of ruwe oppervlakken te verbeteren en te beschermen. Gebruik een computer om uw illustraties te maken, want kopieerapparaten en printers kunnen geen wit afdrukken, ze vertrouwen op het papier zelf om de witte component in belettering en illustraties te leveren. Kies de juiste papiersoort op basis van uw printertype, inkjetpapier of laserpapier. Dit is de laser versie Verwijder eventuele tissue-achtige velbeschermers die in het bedrukbare papier aanwezig kunnen zijn en druk die illustratie rechtstreeks af op de glanzende zijde van het decalpapier. Voor inkjetafdrukken raden we aan om de instelling "Transparant Plastic Film" (of folies) te gebruiken als uw printersoftware deze optie ondersteunt. In alle gevallen moet u onmiddellijk een paar dunne, maar grondige lagen fixatiefspray LINK aanbrengen om de afgedrukte afbeelding op het decalpapier te verzegelen, zodat de inkt niet uitsmeert, afwast, barst of afbrokkelt tijdens het aanbrengen. Inhoud: 5 sheets van A4 formaat Formaat: 210 x 270 mm (A4) Printersoort: laser BASISINSTRUCTIES 1.- Knip de sticker zo dicht mogelijk bij de buitenrand van de afbeelding uit. Gebruik voor betere resultaten een gloednieuw mes in uw snijplotter. 2.- Pak het embleem op met je pincet en laat het ongeveer 20 seconden in water weken. Warm water kan helpen bij dit proces. 3.- Gebruik een verfkwast om het embleem voorzichtig van het vel en op het model te duwen. #decal #sheets #waterslide #greenstuffworld #transfer #sheets
€8,95
-
Gangrene 17ml Acrylic Color 1851
Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld
€2,70
-
Peach Flesh 17ml Acrylic Color 1825
Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld
€2,70
-
Moon Mist Grey 17ml Acrylic Color 3240
Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld
€2,70
-
Prussian Blue 17ml Acrylic Color 3223
Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld
€2,70
-
Carnage Red 17ml Acrylic Color 3218
Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld
€2,70
-
Earth Textures - Light Earth 30ml
Acrylic texture for soil and earth effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity. This paste is thick and has a dense consistency, suitable for representing earth textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water. Contains 1 bottle of 30ml textured paste Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken. #earth #series #textured #paste #greenstuffworld
€3,95
-
Rolling pin with handle Flagstone 15mm
Figuur roller met handvat tegels 15 mmRoller waarmee met gelijke druk een continu herhaald patroon op klei, plamuren, polymer klei, green of brown stuff en foam kan worden gedrukt. Hiermee kun je paden, straten, terrassen etc maken. Door de handel kun je ook meer spelen met hobbels etc. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende patronen.Roller breedte: 4 cm (1.5 inches)Roller Lengte met greep: 14cm (5.5 inches)Diameter: 2'5cm (1 inch)Schaal: 15-20mm (1/87-1/72) GEBRUIK INSTRUCTIES1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een base, gebruik dan een MDF basis. Dit omdat je de klei, epoxy etc direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood. Wil je alleen een prachtig pad, veranda, straat of iets anders maken dan kun je dit natuurlijk op een platte plaat drogen in de oven. Wil je een pad maken op een XPS foam zorg dan voor een goede druk. Klei of epoxy is zacht materiaal waarin je het patroon zonder hard duwen zult zien. XPS foam heeft gewoon meer druk nodig. In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de deegrollen na gebruik goed te reinigen.Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de roller te verwijderen, indien nodig. #rolling #pin #handle #greenstuffworld
€9,50
-
Martian Tufts Andromeda Pink Neon 6mm
Martian Fluor Tufts Decorate your sci-fi and magical themes bases or dioramas with these unique bright fluorescent martian tufts to make them look that they are in a distant galaxy.Choose the most appropriate color from the extensive Martian Botanics collection based on the extreme neon color combination. These alien bushes, in addition to the intensity of color in the normal state, also react with ultraviolet light.For placement, just take the grass tufts out of the package using tweezers and fix them with their self-adhesive sticky bases. Although self-adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix.Fiber Size: 6mm highSheet size: 140 x 70cmContent: 75 martian tufts #greenstuffworld #martian #tufts #alien
€5,75
-
Reality Yellow-Green pigment Glow in the Dark 30ml
Luminescent Glow in the Dark powder able to collect energy from light and store the light energy for some time making them glow for hours afterward, even when the light source is turned off. The maximum luminescence remains for 20-30 minutes, after which the energy gradually fades. The process of absorbing light energy can be achieved simply by exposure to light. Ultraviolet lights have the ability to overload these pigments strongly. Our ultra glow powder is a phosphorescent product that can be mixed with water and non-water based mediums to be fixed. We recommend using them in the combination with master mediums, paints, varnish, or UV resin for them to stay permanently. These luminescent pigments can also be mixed with fluor pigments to enhance the daylight color. The lighting strength will decrease as more fluorine pigments are added. These powder are non-toxic, but you should avoid inhaling them. Contents: 1 bottle of 30ml. Warning:The glow in the dark pigments, yellow and orange, will light up differently depending on the type of light with which they are charged.- If the light used is ultraviolet, Yellow will be Yellow and Orange will be Orange.- If the light used is white light or natural light, Yellow and Orange will have a Greenish color in the dark. Maak met master medium je eigen glow in the dark verf!
€6,00
-
Doorzichtige holle bases 32mm (20st)
Hollow Plastic Bases - TRANSPARENT Transparent plastic bases bevelled and hollowed out on the inside to create a watery, marshy or even sinking effect to recreate the effect of being in the water or marsh. The transparency of the plastic gives depth and enhances the aquatic effect allowing the interior details to be seen from any direction.Compatible with any wargame or board game. Each pack contains 20 x 32mm round clear plastic bases. #hollow #bases #transparant #32mm#greenstuffworld
€4,00
-
Miniatuur blaadjes Rood 60ml - Micro leaves Red
Miniatuur blaadjes Deze miniatuur blaadjes zijn met zorg gestansd uit speciaal materiaal. Ze zijn zo ontworpen dat ze een realistische look hebben met een echt bladvorm. Dit materiaal is bijzonder geschikt om bomen te voorzien van gebladerte maar ook struiken of ondergrond. Het maken van een klimop, grondbedekking of bosgrond is eenvoudig met deze miniatuur blaadjes. De inhoud is 60ml, 15gr, in herafsluitbare doorzichtige plastic doosjes. MICRO LEAVES Micro Leaves are a very delicately cut, special flocking material. They have been designed to have a deceptively real, leaf-like shape. The material is particularly suited for flocking trees, tufts, or shrubbery, as well for designing ivy, ground-cover plants, or forest floors.These micro leaves are packaged in closed plastic boxes of 15gr. capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. #greenstuffworld #micro leavexs #red#micro #mini #blad #60ml
€6,00
-
Beige bruin tufts - struikjes 12mm
Grass tufts - 12mm zelfklevend - beige bruin Moderne zelfklevende tufts om je basis van je modellen, scenery, velden, rivier- en beekrandjes, groeven etc. aan te kleden. Pak met een pincet deze tufts van de strook en plak deze waar je ze wilt hebben. Wij adviseren om je een klein dotje lijm te gebruiken wanneer je de tufts gaat bevestigen. Nylon grass 12mm hoog sheet is 4 bij 15cm groot ong 40 tufts Grass TUFTS - 12mm Self-adhesive - Winter Innovative self-adhesive scenic basing tufts perfect for decorating miniature bases, scenery, field paths, lake, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or to brighten meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self adhesive, a dab of glue may be required to apply to some surfaces for a permanent fix. Type of Flock: NYLON FLOCK Fiber Size: 12mm high Plastic sheet size: 4x15cm Content: 40 tufts
€5,00
-
Oxidizer - 17ml
Oxidizer 17ml Oxidizing agent which activates the natural oxidization process of metals generating porosities and natural rust. Brass photo etches will improve the grip of paints. Some natural rust could be toxic, it is recommended to varnish after oxidizing to seal the rust and avoid contact. This effect will rust the pure metal pigments from our range in a very natural way. Contents 1x 17ml Oxidizer *********** Oxidizer 17ml Oxidatiemiddel dat het natuurlijke oxidatieproces van metalen activeert, waardoor porositeit en natuurlijke roest ontstaan. Foto-etsen van messing verbeteren de grip van verf. Sommige natuurlijke roest kan giftig zijn, het wordt aanbevolen om na oxidatie met vernis te lakken om de roest af te dichten en contact te vermijden. Door dit effect roesten de pure metaalpigmenten uit ons assortiment op een heel natuurlijke manier. Inhoud 1x 17 ml oxidatiemiddel #metal #oxidizer #roest #greenstuffworld #oxidatie
€3,65
-
Rolling pin Vampire - figuur roller Vampire
Figuur roller Vampire Roller voorzien van een basisfiguur waarmee een continu herhaald patroon op klei en plamuren kan worden gedrukt. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende texturen die u kunt kopen op basis van uw specifieke behoeften.Lengte: 14'50 cm (5'5 inches)Diameter: 2'5cm (1 inch) GEBRUIK INSTRUCTIES:1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een basis, gebruik dan een MDF basis. Dit omdat je de polymeerklei direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood, maar maak je geen zorgen dat het zal branden! In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller of de klei enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de rollen na gebruik goed te reinigen. U kunt deze rollers ook gebruiken op XPS of Styrodur foam. Gebruik dan ook de silicone ringen zodat je een flinke zelfde druk uit kan voeren om het patroon over te brengen. Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de roller te verwijderen, indien nodig. Om de veiligheid te garanderen, moeten kinderen nauwlettend worden gecontroleerd door een verantwoordelijke volwassene.
€13,00
-
Tropical Green 1556 Chameleon - Colorshift 17ml
COLORSHIFT CHAMELEON METAL PAINT Chameleon metal paints will create a colourshift visual effect depending on the viewing angle. Valid for brush and airbrush.Best results will be obtained with Airbrush. Made without animal products. Non edible. Uses: Shake well and apply over BLACK basecoat. For the best effects, use gloss blackcoat so it will increase the effect.Semitransparent chamaleon paints could also be applied over other basecoat colors to achieve different colorshift effects. Paintvery very light coats till maximum colour shows up and basecoat is no longer visible. Each coat should be dried before applying the next coat. Use varnish only when paint is totally dried. Contents: This offer includes an acrylic COLORSHIFTTM Chameleon color with ultra fine pigments. Non-Toxic Waterbased paint. Non-Flameable. No Latex. Note: This paint has a totally normal whitish appearance. We recommend shaking well before using for an optimal pigment mixture. Depending on the shape and size of the object on which the paint is applied, the chameleon effect will be better appreciated. We recommend its use on curved surfaces, it will reflect light better than flat surfaces. If the surface is very small, the effect may not be appreciated, it will always depend on how the light strikes. Warning: Very extreme and long periods of exposure to temperatures below -10 ° C could freeze the paints with unpredictable results. #tropical #green #chameleon #colorshift #1556#greenstuffworld
€3,65
-
Pigment Titanium White (wit) (30ml)
Natuurlijke pigmenten voor modelleren zijn bij ons verkrijgbaar in verschillende kleuren. Deze pigmenten zijn breed toepasbaar in de miniatuurwereld. Zo kun je met pigmenten verweringseffecten aanbrengen, waaronder stof, roest, moddervegen, mosstukjes, grondverkleuring of bijv modder maken. Je kunt pigmenten direct gebruiken over het model, diorama, scenery, resin produkten of wargaming terrein met behulp van een pigment fixer of mud effect (acryl pasta) zodat ze prima gefixeerd worden. Deze pigmenten kunnen droog of nat worden aangebracht, afhankelijk van wat u wilt bereiken. Meng ze met elkaar en met onze Acrylic Pigment Fixer of met Mud Effect om ze nat aan te brengen. Als u besluit de pigmenten droog aan te brengen, kunt u ze later fixeren met Acrylic Pigment Fixer. Deze pigmenten zijn niet giftig, maar vermijd inademen van het stof door neus of mond (dus niet opsnuiven!). Inhoud: 1 flesje van 30ml.
€3,50
-
Siliconen mallen grasstenen (set van 2)
2 soorten Siliconen mallen grasstenen Gemaakt van hoogwaardige voedingswaren siliconen. Makkelijk in gebruik en zo gesneden dat er vele steenvormen in de mallen aanwezig is. Deze mallen zijn hittebestendig en duurzaam. De mallen zijn extra diep om zeer gedetailleerde mooie resultaten te geven voor zowel dimensionaal ontwerp als oppervlaktedruk. Elke mal heeft een groot oppervlak van 2,5x5 inch (6x12cm) en is flexibel voor optimale bruikbaarheid. De mallen werken geweldig met en elk soort materiaal inclusief hars.Met deze flexibele mallen kunt u eindeloze hoeveelheden baksteen en straten te maken die bruikbaar zijn voor de schaal 1:35.Hittebestendig rubber tot 240ºCVoedingswaardeResin-GradeSchaal 1:35 (1:32-1:43) We raden aan om klei boetseer schrapers te gebruiken om het overtollige kit / klei uit de vormen te verwijderen om beschadigingen te voorkomen Bevat 2 vormen met 4 type stenen. Voeg los static grass 3mm toe na droogtijd om het grasstuk na te bootsen.
€12,50
-
Rolling pin Diamond - figuur roller Diamant 1224
Figuur roller Diamant Roller voorzien van een basisfiguur waarmee een continu herhaald patroon op klei en plamuren kan worden gedrukt. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende texturen die u kunt kopen op basis van uw specifieke behoeften.Lengte: 14'50 cm (5'5 inches)Diameter: 2'5cm (1 inch) Diamant grootte: 3x1mm GEBRUIK INSTRUCTIES:1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een basis, gebruik dan een MDF basis. Dit omdat je de polymeerklei direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood, maar maak je geen zorgen dat het niet zal branden! In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller of de klei enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de deegrollen na gebruik goed te reinigen.Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de deegroller te verwijderen, indien nodig. Om de veiligheid te garanderen, moeten kinderen nauwlettend worden gecontroleerd door een verantwoordelijke volwassene.
€13,00
-
Intensity Ink Viridis Green (groen)
Met een kwast of airbrush aanbrengen. De verf droogt dekkend op (dus niet als een wash ink als aquarelverf) op oppervlakten maar gaat zich vooral hechten in groeven, hoeken, diepte, gaatjes, oneffenheden etc. Een bijzondere goede kwaliteit verf. Elk flesje heeft 17ml inhoud. Verdund of onverdund gebruiken op allerlei soorten ondergrond. Eventueel bij teveel verdund gebruik kan er nog een laag aangebracht worden. Droogt mat op. Kan gemengd worden met andere acrylverf kan over andere laag Intensity Ink worden aanbracht waardoor kleurverrijking ontstaat.
€2,99
-
3D Print - Mechnical Servo Skulls
Mechanical Skulls 3D Printed Compatible Servo Skulls in the WH40k universe are an iconic element of the Imperium’s technology, and they are especially prominent in the forces of the Adeptus Mechanicus. These floating, robotic compatible drones are made from the skulls of deceased humans—often those who have served the Imperium with distinction—and are repurposed with a range of augmented technologies. Controlled by machine spirits, they serve a wide variety of roles, such as reconnaissance, combat support, and even as messengers or data retrieval units. They are a distinct symbol of the Imperium's reverence for technology and the bizarre blending of the organic with the mechanical. Content Set of compatible Warhammer bits printed in high-quality resin. This set comes unpainted and is perfect for 25-28-54 mm miniatures (1:52, 1:48, 1:35). Ideal and compatible with a wide range of wargames such as Warhammer 40k, Necromunda, Confrontation, Star Wars Legion, Kill Team, Space Hulk, and many others. Each set includes x8
€4,75€4,50
-
Fleximold Soft - Reusable molding material 500ml
What Is Flexi Mold and How Does It Work? Flexi Mold is an innovative and versatile material designed for the manufacture of 1 or 2-sided reusable molds, offering a sustainable and reusable alternative to traditional silicone molds. It can be melted and reused many times, making it a cost-effective and environmentally friendly option for a variety of applications. It is flexible, food grade, and allows mistakes to be corrected by re-melting and starting over. Because it is biodegradable and contains no petroleum-based components, it is an environmentally friendly option. To use Flexi Mold, heat it (preferably in a microwave), pour it over the object you want to reproduce, and let it cool. Once solidified, it will capture complex details accurately, making it ideal for artistic, culinary, and part-production purposes. Flexi Mold is a superior alternative to silicone because it offers several distinct advantages over traditional silicone molds: Performance: It is reusable, which significantly reduces material costs over time. Environmental Safety: Being biodegradable and free of harmful chemicals makes it a safer choice for the planet. Correctable: If a mistake is made, it can be remelted and remolded without wasting material. Ease of use: Unlike silicone, it requires no mixing or curing agents, simplifying the process. Food grade: It can be used in the process of culinary elaborations. Although working with silicone allows for more durable molds, in terms of single-use applications, they are an excellent alternative for most projects because of their reusability and eco-friendly nature. Important usage advice: This product should only be heated in microwave-safe containers, such as the product packaging, in which it comes. The use of incompatible containers could melt them and even damage the product generating unsafe handling conditions. How Many Times Can You Reuse Flexi Mold? Its reusability and food compatibility are its most significant advantages. Generally, when used correctly and with proper care, Flexi Mold can be reused more than 35 times. In fact, with careful handling, its shelf life could be extended to over 100 times. By avoiding overheating above 82°C (180°F) and filtering out waste after each use, more than 35 cycles can easily be achieved. Users have reported extending their service life to over 100 remelting processes. Filter out debris and particulates to keep it clean and efficient for future use. The time it takes to cool depends on the size and thickness of the part. Small ones (about 300 ml or 10 ounces) solidify completely in about 2 hours at room temperature. To speed up the process, place it in the refrigerator, where its cooling time can be accelerated. Larger sizes may need more time to solidify completely. Process of use Melting: Heat it until it becomes a liquid. To do this, you can use the microwave, always in short heating intervals 10-15 seconds 2-3 times, or a bain-marie. If it is heated all at once in the microwave, it may burn. Pour: Pour the molten material over your object or into a casting box in which to make your mold. Cool: Allow it to solidify completely by letting it cool to room temperature or refrigerate it for faster results. Reuse: When no longer needed, reheat the product to reshape it or create a new one. How Do You Melt Flexi Mold Safely? It can be melted either in the microwave or in a bain-marie using the product container. Microwave method: Use a few seconds of heating intervals to avoid overheating and thus degradation of the product. The usual heating times are as follows, although it is wise to constantly monitor the state of the product as it turns to liquid. 300ml (10 oz.): 1-2 minutes. Select the time in your microwave and stop every 10-15 seconds to check the condition of the Flexi Mold. Continue heating until ready to use. 600ml (20 oz.): 3-5 minutes. Use the technique explained above, with the possibility of extending the intervals a few seconds longer. 1200 ml (40 oz.): 7-10 minutes. In this case, the intervals will be somewhat longer. The product should be heated in short periods of time of 10-15 seconds, so if we try to save time and heat it for more than 1 minute continuously, the product could burn. 2.- Double boiler or bain-marie method: Place it in a container inside another pot with water. This method keeps the temperature below 100°C (212°F), reducing the risk of burns. Always stir it during heating to ensure even melting and to avoid overheating your container. Remember to stir it superficially so as not to introduce air and bubbles that will be transferred to the mold, creating imperfections. What Materials Can Be Cast with Flexi Mold? Flexi Mold is versatile and works well with many casting materials including: Gypsum, Acrylic Resin and Plaster: Ideal for decorative items and art projects. Resins: We recommend using slow curing epoxies or polyurethanes only for small parts to avoid overheating. Chocolate and sweets: It is food safe, making it perfect for culinary creations. It is certified for food contact, making it ideal for chocolate, fondant and other confectionery projects. Just make sure the material is clean before use. Candle and soap wax: Cool before pouring hot materials to ensure faster cooling. It can even be used to shape unique materials such as polymer clay, ensuring smooth, detailed results. Remember, after molding the clay you must bake it, without a mold, to make it resilient and keep its shape. Precautions when using resin with Flexi Mold Resin generates heat during curing, so there are several things to keep in mind before using it. Size: Larger projects tend to produce more heat due to the larger volume of resin that reacts. This is why you should only use it on small projects. Otherwise, the accumulated heat will damage the mold as it could eventually melt it. Ambient temperature: Ambient temperatures affect the prolongation or reduction of the curing process of these materials. Resin type: Different resins have different curing characteristics, including the amount of heat they release. Consult the manufacturer's manual for proper cure. Additives: Additives such as pigments or fillers can affect the curing process. Cooling: When using these materials, which work with temperature, it is advisable to let them cool completely. Understanding these factors helps to achieve better results with resin projects. How Do You Clean and Maintain Flexi Mold? Cleaning is simple. Use a cool, damp cloth to remove debris, avoiding immersion in hot water, as the material can dissolve in hot water. For molds with embedded particles, remelt it and filter it through a fine mesh or filter to restore its purity. Store it in a cool, dry place, always protected from extreme temperatures to prevent it from losing properties and deteriorating. It will then be ready for your next project. What Are the Temperature Guidelines for Using this Reusable Material? It is reusable and melts at approximately 140°F (60°C) and can withstand temperatures up to 180°F (82°C) during heating. When working with high temperature casting materials, cool the product in the refrigerator for a few minutes before pouring to avoid warping. Can Flexi Mold Be Used for Two-Part Molds? Yes, it is ideal for creating two-part molds. Here’s how: Prepare the Base: Begin by embedding your object halfway into a layer of clay. Shape the clay carefully to cover half of the object, ensuring smooth edges to reduce seam lines and achieve a better fit between the halves. Set Up the Casting Box: Place the clay and object setup into a cast frame square. Apply a release agent evenly over the exposed surface of the object and the surrounding clay. Pour the First Half: While the release agent is still wet, pour the melted molding material over the exposed portion of the object. Make sure it fully covers the surface. Allow the material to cool and solidify completely. Prepare for the Second Half: Once the first half has solidified, carefully remove the clay and apply a release agent to the surface of the solidified part. Chill this first half in the freezer to prevent melting during the second pour. Pour the Second Half: Reheat the molding material to a temperature between 50°C and 60°C (120°F–135°F). Let it cool slightly until pourable but not too hot. Pour the material over the remaining half of the object and the first half. Finalize the Mold: Allow the second half to solidify completely. Once cooled, you’ll have it ready for use! By following these steps, you can create precise molds with minimized seam lines and a seamless fit between the halves. How Can You Minimize Bubbles in Flexi Mold? To avoid bubbles: Pour it slowly and steadily. Use a vibrating surface to release trapped air. Paint a thin layer of melted Flexi Mold onto difficult details before pouring. Seal porous objects to prevent air from escaping during molding. Is it Safe for Pets or Accidental Ingestion? It is a non-toxic material made from food-safe ingredients. However, if you incorporate substances like urethanes, plaster, or release agents into the mold-making process, it may no longer be safe for consumption. Always refer to the Material Safety Data Sheet (MSDS) for those additional materials to ensure safety. Interestingly, some dog owners have reported their pets consuming it, as it seems to attract their curiosity. In all reported cases, the dogs were fine afterward. That said, if your dog shows any unusual behavior or symptoms, it’s best to consult a veterinarian to err on the side of caution. Warnings before use Flexi Mold is a partially water-soluble material, so it can dissolve in contact with water. That is why it is not recommended to fill the molds with water-based mixtures (such as acrylic resin, plaster, or plaster, among others) without taking the appropriate measures. To achieve an optimal result with these mixtures, it is absolutely necessary to apply a layer of release agent inside the mold, which will protect it from the humidity of the materials inside. Specifically, from Green Stuff World we recommend the use of sculptor vaseline since our team of experts has proven its effectiveness. It is important to keep in mind that once Flexi Mold has been mixed with Vaseline, it will no longer be a food-grade product and therefore cannot be reused to create molds in culinary recipes. In addition, it is recommended that vaseline residues be cleaned as much as possible before reuse to avoid premature degradation of the product.
€21,00
-
Acrylic Inks - Fluor Orange 30ml
GSW fluorescent acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid liquid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, including painting model figures or miniatures, comics with paintbrush or fillable markers, and creating watercolor-like effects. These fluor inks offer intense, vibrant colors that remain vivid over time due to the new premium pigments used. They provide a smooth, matte finish that enhances the visual appeal of the final artwork by reducing glare. The fluorescent colors are bright and eye-catching, adding a dynamic, electrifying element to any piece. The inks are suitable for airbrushing, paintbrushes, and calligraphy without the need for dilution, making them convenient for various techniques. These model paints work seamlessly with other GSW acrylic products and mediums, allowing for a cohesive and integrated approach to mixed media projects. They can be used undiluted for concentrated, intense colors or diluted with mediums to achieve rich transparencies that add depth and subtlety to artworks. This flexibility allows artists to experiment and find the perfect composition balance. The product comes in a glass bottle with a dispensing pipette, allowing for precise application and control over pigment intensity. This design ensures that each drop is exactly as needed, enabling detailed and accurate work. The inks enable the creation of color filters, depth effects, and luminous works that captivate and inspire. Their transparency allows for subtle plays of light and color, creating sophisticated and enchanting visual effects. Perfect for glazes and detailed painting in model figures and miniatures, these inks allow for intricate and lifelike finishes. Suitable for airbrush, paintbrush, and fillable marker techniques in comics and illustrations, they provide the flexibility to create bold lines and delicate details. They help achieve delicate, translucent layers that add a sense of depth and fluidity to artistic creations, making them ideal for watercolor effects. The inks also cater to calligraphy and lettering, providing artists with the tools to create with clarity, precision, and vibrant color. Whether aiming for bold, intense hues or delicate, transparent washes, these inks meet the demands of various artistic styles and techniques. Main characteristics of Airbrush Paint: Extremely pigmented. Matte finishes Fluorescent, fluid, and intense colors. It is not necessary to dilute it to use it with airbrushes or in calligraphy. Compatible with all other GSW acrylic products and mediums. Contents: 1 glass bottle of 30ml with dispensing pipette.RAL color: 2005Finish: matteOpacity: Semi-Transparent
€5,00
-
3D Print - Armory - Two Handed Dwarf Axes
Dwarf Resin bits are compatible with games such as Warhammer: The Old World and any dwarf army. This set of resin products created by Green Stuff World has been specially designed to be compatible with games such as Warhammer: The Old World and more specifically the dwarf army. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures, and accessories with exceptional detail, enhancing your gaming experience. Bring a realistic touch to your bases, dioramas, and figures using these high-quality, ABS-like plastic bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales. Selecting the right model glue and modeling tools is essential to assembling your Warhammer bits effectively and achieving optimum results. Understanding the project requirements, exploring the available options, and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice, and considering long-term maintenance are crucial to making informed decisions. These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale). Each set includes 10x Dwarf Axes
€4,25
-
3D Print set - Dungeon Doors
Resin Dungeon Doors A 3D-printed set for Dungeon and Dragons, Hero Quest, or Pathfinder can be a fantastic addition to your hobby toolkit. 3D printing allows you to create highly detailed and realistic custom sets, elevating your gaming experience. By adding these ABS-like resin DnD bits to your game boards you can add a realistic touch to your creations. It has been carefully designed to mimic classic elements present in many medieval castles but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your Dungeon Tiles. This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures. Content: 4x resin dungeon doors
€5,50
-
Plastic round to square base adapter 40mm
Round to square adapter AOS-TOW 40mm Green Stuff World's Hollow Plastic Bases offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections. They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as Round to square base adapters 40mm. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. These AOS base adapter will convert round to square and they will be compatible with games such as 9th Age, Warhammer the Old World, or older editions of Warhammer Fantasy with square serves a couple of purposes: Compatibility: Different tabletop wargames have different base shapes and sizes. For instance, Age of Sigmar typically uses round bases, while older editions of Warhammer Fantasy use square bases. They allow players to use models from one game system in another without having to rebase all their miniatures. Aesthetic Consistency: Some players prefer the aesthetic of squares over round ones, or vice versa. Base adapters enable players to maintain a consistent look across their army, regardless of the shape required by the game they're playing. Versatility: You can play games with different base shapes of miniatures at the same time without having to change everything. This is especially useful when everything is decorated and painted. Tournament and Rule Compliance: In some tournament settings or specific rule sets, there may be requirements for base shape and size. Adapting bases ensures that your miniatures comply with these rules without needing to rebase your entire collection. Contains 10x Base Adapters round to square base adapter 40 mm from Age of Sigmar to The Old World.
€3,50
-
Grass Tufts XXL 6mm Realistic Green
Grass Tufts 6mm - color Realistic Green Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface. Although its built-in adhesive ensures a solid initial hold, it is advisable to apply a small amount of additional modeling glue on uneven surfaces to ensure permanent and optimal adhesion. They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature. For more realism combine them with our static grass, basing materials, and textured paints. Fiber Size: 6mm high Plastic sheet size: 7x14 cm Content: 75 tufts
€5,25
-
3D print sets Chunky Mushrooms XL
A 3D-printed set of mushrooms made from high-quality ABS-like resin offers a delightful addition to your dioramas and scenery projects. These mushrooms are thoughtfully designed to closely imitate real species found in the forest, adding a touch of natural beauty to your displays. With a diverse range of shapes and sizes available which can cater to various needs and scales, making them suitable for a wide array of creative applications. Whether you're crafting a magical woodland scene or a realistic nature diorama, these resin bits can enhance the visual appeal and storytelling of your projects. Their high-quality resin material ensures durability and longevity, allowing you to enjoy them for a long time. These Warhammer bits are perfect for adding an enchanting and authentic touch to your miniature worlds. Choosing the appropriate modeling glue, modeling tools to assemble your Warhammer bits is essential for achieving optimal results and efficiency in any project. Understanding the project's requirements, researching available options, and evaluating their performance and suitability are key factors. Additionally, considering the expertise and resources available, staying up-to-date with the latest developments, seeking advice from experts, and thinking about long-term maintenance are all crucial aspects of making an informed decision. This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures. Contains: x6 Chunky Mushrooms XL
€5,25
-
Steel Mixing balls 8mm (QSS316L)
Mixing Balls 8mm Set of 35 Stainless steel bearing balls in 8mm to mix paints. These mixing balls are coming with a special coat to make them completely paint proof which will avoid the rusting process after long periods of contact with paints that may ruin the paint colors. They are not magnetic but they will be attracted by magnets. They are suitable either for personal or industrial uses in order to guarantee a proper mixture of all paint contents and therefore avoid having all pigments deposited in the bottom of the pot, especially after long-term storage. This set includes 35 stainless steel ball-bearing of 8 mm, perfect for mixing and stirring paints pots such as Green Stuff World, and Citadel, among others. The total weight of 1 ball is 2gr. Quality SS316L
€4,75