GreenStuffWorld

Large Wooden Ladders resin setThis resin bit set created by Green Stuff World has been specially designed to decorate your war and trench dioramas. The 3D resin printing adds a fascinating element to your arsenal of hobby tools and wargaming tools. With this technology, you can create landscapes, wargaming miniatures, and custom accessories with exceptional detail, enhancing both your gaming experience and the quality of your dioramas. Its design style is fully compatible with the dark universe of the Trench Crusade® game, as well as with other similar wargame and narrative modeling settings such as war-themed dioramas or scale models. Manufactured using high-quality 3D printed resin, these pieces offer an outstanding level of detail that will enhance both your scenery projects and your games. Add a realistic touch to your bases, dioramas, and figures with these high-quality resin bits, similar to ABS plastic. Whether you're building level transitions, reinforcing parapets, or simply adding realism to a trench, these ladders bring visual depth and thematic consistency to your gaming table. Perfect for representing rustic and functional wooden structures in war-torn environments, these pieces are ideal for scenery in 32 to 54 mm miniatures (1:48, 1:35 scale). This product is supplied unpainted. Contains: 6 pieces Trench Crusade® is a registered trademark of Factory Fortress INC. This product is not affiliated with or endorsed by Factory Fortress INC. Green Stuff World only manufactures and markets compatible products designed for use with these and other lines of miniatures.

Read more less

LED Lighting Kit with Switch Fully Assembled lighting kit for leds with pre-attached mini-switch for almost Plug and Play use. All in one light package.To be used with a standard coin cell CR2030 (3v), not included in the kit. To help wire conections use shrink-tubes also available at our shop. Batteries NOT included! Length of the wires: 120mm + 120mmCell holder size: 22 x 3.2mm

Read more less

Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Miniatures Carry Case Size Small Army Transport Bag has been specifically designed to protect your armies while in transit. Made of lightweight, hard-wearing, and padded Oxford fabric for long-term durability will allow you to carry more than 54 miniatures sound and safe and distributed among its 2 levels. It includes a reinforced MDF Cabinet to guarantee a resistant structure, 1 removable metalized tray, one long restraint strap and one top handle for comfortable handling, and finally 4 adjustable heights to place the trays with your minis. If you want to gain a few extra centimeters of inner space, you could remove the first lower MDF tray, and glue the metalized rubber directly to the base of the cabinet. To make this modification, simply cut with scissors the rubber so that it can fit. By doing so, the lower level will no longer be removable. Size: 30x15x18cm. Total weight 1.4kg. Assembly instructions inside. Includes: 1x Miniatures Carry Case - Army Transport Bag 1x Complete cabinet 1x Trays +1x adhesive metallized rubber sheet  Warning: This carrying case must protect your wargame armies, so it is absolutely necessary to reinforce the assembly with PVA glue. Army Transport Bag Accessories It can be combined with 3 accessories. Additional removable tray Additional cabinet to be able to organize all your armies.  * These accessories are sold separately.

Read more less

Magnifying desk lamp for painting, crafts and photographing.   The white magnifying lamp is a professional tool designed for precision work in modeling, crafts, electronics, and other activities that require clear lighting and visual magnification. It features a 155 mm diameter glass lens with 2x magnification, integrated into a flexible structure with a solid base and object holder. This magnifying lamp is ideal for keeping both hands free while working on fine details or small surfaces. The lamp has 56 high-power LEDs that provide neutral white lighting of 4,500 K and a light intensity of 1,200 lumens, offering soft, uniform, shadow-free light. Thanks to its touch dimmer with 10 intensity levels, the light can be adjusted to suit the needs of the environment or the user's sensitivity. The 49.5 cm long flexible arm allows the light to be easily directed at any angle and can be extended to a total height of 65 cm. The ergonomic and robust design ensures stability and comfort during prolonged use. The magnifier with light is USB-powered (5V/1–2A input) and can be connected via an adapter (includes compatibility with 100–240V 50/60Hz). Its compact 6.1-inch diameter base takes up very little space on your work surface, making it perfect for small desks or hobby stations. In addition, the structure can be rotated to both sides (left/right), offering even more versatility. Available in elegant matte black, it is an ideal choice for both professional and home environments. Technical features: Magnification: x2 Neutral white light: 4,500 K 56 LEDs with adjustable intensity Maximum brightness: 1,200 lumens Lifetime 80.000 Hours Color Rendering Index (CRI) = 80 Touch dimmer with 10 intensity levels Arm length: 49.5 cm Total extended height: 60 cm Base diameter: 15.5 cm USB input: 5V/1–2A (10 W max.) Compatible with adapters: 100–240 V, 50/60 Hz Adapter output: 5V/2A Flexible arm and adjustable structure USB and European plug Cable length: 2 meters Color: matte white NOTES: The lamp is suitable for use in countries with lower voltage (100-127v), but only includes the European plug.

Read more less

Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Air Dry Foam Clay, also known as Foam Clay, is a lightweight acrylic-based material popular in cosplay, crafting, terrain, casting, texture rolling pins and modeling.  It is highly moldable by hand or with hobby tools, making it perfect for creating detailed items like terrain, figures, DIY projects, and slimes, but also cosplay armor, weapons, and accessories. Unlike other materials, it dries naturally at room temperature within 24 to 48 hours. A key feature of Foam Clay is its flexibility and its solubility in water. While it hardens after drying, it retains enough elasticity to prevent cracking. This makes it ideal for large projects that need to be carried or dressed. It can also be smoothed easily with water, ensuring seamless connections between parts for a professional finish. Foam Clay works well with silicone molds, allowing creators to quickly reproduce detailed textures or designs. For molds with very thick pieces of material, it is recommended to freeze the mold with the material, thus facilitating its removal. Commonly, it’s paired with EVA foam and Worbla to enhance larger projects, adhering easily to surfaces and filling gaps effectively. Once fully dried, Foam Clay can be painted with acrylic paints, but a primer is recommended for better adhesion. Flexible paints are preferred if the project will undergo frequent bending to avoid cracks in the paint. For thicker designs, freezing may be required to fully harden the material. Overall, Foam Clay’s moldability, flexibility, and ease of use make it a top choice for hobbyists and cosplayers looking for detailed, lightweight, and durable creations. Contents: 250gr.

Read more less

Give your army a heavenly and mystical touch with our exclusive collection of 40K Cherub Angels, 3D printed resin bits. These detailed 40k Cherubs figures will transform your miniatures, miniature bases, and scenarios into true masterpieces, bringing a divine and dark gothic grimdark air to your games. Our online store specializes in offering sets of mechanical, diabolical angels, and other small flying minions, designed to be compatible with a variety of fantasy miniature games such as 9th Age, ASOIAF, WHF, Warhammer 40K, and the reborn WH the Old World. Made from ABS-like high-quality resin for 3D printers, these bits stand out for their exceptional level of detail, perfect for a fantasy aesthetic in a dark science fiction universe that fits perfectly into the grimdark aesthetic. From small Angel Cherubs with scrolls to winged figures with sensors and relics, each piece is designed to be compatible with your 1:48 miniatures, offering you the possibility to customize and give a unique look to your figures and squads. Whether you are an enthusiastic modeler or a wargamer, these Warhammer bits that are compatible will allow you to enrich your conversions and make your heroes or special units stand out on the battlefield. These cherubims are delivered unpainted and in their printing matrix, with easy-to-remove stands so you can assemble them without complications and adapt them to your army. For precise assembly, in our store, you will find essential modeling tools such as modeling glue, specialized model paints, and ultra-flat precision modeling pliers, ideal for working with resin and ensuring clean and professional assemblies. Contents: 4x

Read more less

Extra Cabinet - Medium Extra Cabinet is designed to complement the transport and storage of miniatures. It can be used both as an additional cabinet for the GSW Army Transport Bag and as a free-standing stackable storage system. Manufactured of MDF wood is capable of accommodating more than 200 miniatures distributed among its rack levels. Storage modules with removable and configurable trays. These modules are designed to be stacked on top of one another, allowing for a customizable and space-efficient storage solution. Their property of being stackable between them will allow them to stack, for example, 1 medium module + 1 small module which equals 1 large module. It includes 4 removable metalized trays and its height is adjustable up to 11 levels to place the trays with your miniatures. If you want to gain a few extra centimeters of inner space, you could remove the first lower MDF tray, and glue the metalized rubber directly to the base of the case. To make this modification, simply cut with scissors the rubber so that it can fit. By doing so, the lower level will no longer be removable. Size: 7x11,8x11,8 in. (18x30x30cm). Total weights 2,3kg. Assembly instructions inside. Includes: - 1x Complete cabinet - 4x Trays + 4x adhesive metallized rubber sheets

Read more less

Tree Bush - Clump Foliage Scenic bush foam materials are specially designed to create bushes, undergrowth, and clump foliage. It will allow you to easily cover tree branches, treetops, and all sorts of hobby trees. Easy to glue down with PVA glue or Spray glue. A specially produced ground foam for bushes, undergrowth and clump foliage. Models medium-to-large ground cover. It is great for landscaping hillsides.  Flake size 2-8 mm Ideal to use with Frames of War, Bolt Action, railway modelling, dioramas, landscapes etc. Content: 200ml 

Read more less

Elven Runes and Symbols Collection of 300 elven-themed runes, symbols, and signs made of brass. There are 12 different types to choose from, separated into different compartments. They are perfect for adding details to armor, weapons, and banners of your models and miniatures or for decorating dioramas. We recommend using cyanocrylate glue in small quantities. Approximate thickness of characters: 0.26mmSize: 2-3mmQuantity: 300 characters (25 units of each character) NOTICE: Due to the small thickness and size of the pieces, some could come out of the separator disk, or change compartment.

Read more less

Water River - Neoprene Terrain Set High quality 2D neoprene terrain tiles compatible with any roleplaying game. Wage your battles on an epic battlefield overrun by a 10 cm (4 inch) wide wild river, complete with fish, lilypads and rapids. Stone bridges and loose rocks allow for different optional gameplay mechanics, it all depends on your imagination! Create different river streams in each game by changing round the tiles. They can be combined with each other creating a river of up to 4.5 metres (180 inches), and once victory has been declared it can be packed away easily tile by tile, allowing for easy storage thanks to their small size. Neoprene Modular Tiles Printed using heavy-duty materials, the Neoprene Terrain Sets are fade and scratch resistant. The tiles have a completely seamless matt finish on the printed image, which allows photographs to be taken of miniatures with virtually no fabric grain showing up in extreme close-up photographs, particularly useful for small-scale sizes. The antislip rubber backing provides a firm grip on the table and creates a high level of friction, preventing miniatures from sliding when on an even surface and assuring their position on the battlefield. The nature of neoprene means these tiles are very resilient yet flexible, completely resistant to wrinkles and creases. This Terrain Set includes: 2x Crossing fords - 8x12" (20x30cm)2x Stone bridges - 8x12" (20x30cm)3x River long curves - 8x12" (20x30cm)4x River diagonal tiles - 8x8" (20x20cm)6x River short curves - 8x8" (20x20cm)2x River intersections - 8x8" (20x20cm)4x River dead-end - 8x8" (20x20cm) Total x23

Read more less

Acrylic starter kit for painting wargames miniatures from Green Stuff World This is a Maxx Formula Acrylic Paint Set specifically formulated for use in painting models, miniatures, and dioramas. It includes a range of highly pigmented acrylic colors perfect for hobbyists who want to take their projects to the next level and achieve professional-looking results. The Maxx Formula Hobby Sets by Green Stuff World is an exceptional product that offers high-quality paints in a range of vibrant colors. These acrylic paints are highly pigmented and offer a high-coverage and smooth matte finish. They are made using new-generation pigments that have been specially selected by experienced artists to provide hobbyists with the highest quality acrylics possible. One of the key features of these acrylics is the use of dropper bottles. These bottles are designed for easy and precise dispensing of the paint and a controlled flow of paint. They are perfect for hobbyists who need to apply the paint exactly where they need it, without wasting any. The dropper bottles also include a metal ball that helps the mixing thoroughly and ensures even distribution throughout the bottle. This feature is particularly useful for hobbyists who may not use them regularly, as it prevents the pigment from settling at the bottom of the bottle over time. Additionally, the dropper bottle has a tight-fitting cap that seals the bottle tightly, preventing air from entering and drying out the paint. This helps to ensure that the colors remain fresh and usable for a long time, even if it is not used frequently. These are versatile colors that can be used with both brush and airbrush techniques. Hobbyists can also use these paints with an airbrush when slightly diluted with Acrylic Thinner, allowing them to achieve a range of effects that would otherwise be difficult to achieve. This versatility makes the range ideal for those who want to experiment with different painting techniques and achieve different effects. Whether you're a beginner or an experienced hobbyist, the Maxx Formula Hobby Set can help you take your projects to the next level. This product is water-based, non-toxic, and does not contain latex. Before use, be sure to shake the container well. It also comes with a stainless steel mixing ball to ensure even distribution of the paint.  Contains 8x 17ml. 1x Pecatum Flesh1x Nuclear White1x Zombie Flesh1x Sun-bleached Bone1x Choco Brown1x Dark Umber1x Gangrene1x Coagulated Blood

Read more less

Acrylic starter kit for painting wargames miniatures from Green Stuff World This is a Maxx Formula Acrylic Paint Set specifically formulated for use in painting models, miniatures, and dioramas. It includes a range of highly pigmented acrylic colors perfect for hobbyists who want to take their projects to the next level and achieve professional-looking results. The Maxx Formula Hobby Sets by Green Stuff World is an exceptional product that offers high-quality paints in a range of vibrant colors. These acrylic paints are highly pigmented and offer a high-coverage and smooth matte finish. They are made using new-generation pigments that have been specially selected by experienced artists to provide hobbyists with the highest quality acrylics possible. One of the key features of these acrylics is the use of dropper bottles. These bottles are designed for easy and precise dispensing of the paint and a controlled flow of paint. They are perfect for hobbyists who need to apply the paint exactly where they need it, without wasting any. The dropper bottles also include a metal ball that helps the mixing thoroughly and ensures even distribution throughout the bottle. This feature is particularly useful for hobbyists who may not use them regularly, as it prevents the pigment from settling at the bottom of the bottle over time. Additionally, the dropper bottle has a tight-fitting cap that seals the bottle tightly, preventing air from entering and drying out the paint. This helps to ensure that the colors remain fresh and usable for a long time, even if it is not used frequently. These are versatile colors that can be used with both brush and airbrush techniques. Hobbyists can also use these paints with an airbrush when slightly diluted with Acrylic Thinner, allowing them to achieve a range of effects that would otherwise be difficult to achieve. This versatility makes the range ideal for those who want to experiment with different painting techniques and achieve different effects. Whether you're a beginner or an experienced hobbyist, the Maxx Formula Hobby Set can help you take your projects to the next level. This product is water-based, non-toxic, and does not contain latex. Before use, be sure to shake the container well. It also comes with a stainless steel mixing ball to ensure even distribution of the paint.  Contains 8x 17ml. 1x Ork Blood1x Ultraviolet Resin1x Liquid Frost1x Desert Earth1x Black Soot1x Prince Tau Blood1x Demon Blood1x Maxx Darth - the blackest Black Paint

Read more less

What is a Glue Gun? The GSW Hot Glue Gun is an incredibly versatile and efficient hobby tool, specially designed to meet the needs of crafters, DIY enthusiasts, and professionals alike. This powerful device offers precision in bonding and fastening various materials such as fabric, plasticard, wood, ceramics, metal, foams, cork, and more, quickly and securely. Ideal for craft and repair projects, it ensures seamless operation with a lightweight, ergonomic design that minimizes user fatigue while maximizing productivity. It’s compatible with 11mm glue Sticks for glue gun and offers adjustable power settings ranging from 120W to 150W. With the ability to reach temperatures between 100°C to 220°C, this tool can be adapted to a wide range of materials, making it highly versatile. The GSW model also includes a fast-heating system, ensuring that it is ready for use in just minutes. Whether you're working on small crafts or complex repairs, it will help you get the job done efficiently and precisely. A glue gun is a tool that uses heat to melt a cylindrical adhesive stick, which then flows out in liquid form. The melted adhesive bonds different surfaces and materials quickly and securely as it cools and hardens. These tools are commonly used in a variety of applications, including arts and crafts, DIY repairs, packaging, and even professional construction projects. The adhesive can stick to a wide range of materials such as wood, plastic, metal, fabric, ceramics, and more. It is ideal for any project that requires fast and effective joining of materials. With an adjustable temperature setting, the GSW model can handle delicate as well as sturdy materials, making it one of the most versatile tools available for both beginners and experts. How to Use a Hot Melt Gun? Using a hot melt gun is straightforward, but there are a few important steps to ensure safety and the best results. Here’s a step-by-step guide: Preparation: Make sure the device is unplugged before you begin. Insert an 11mm adhesive stick into the slot located at the back of the device. Ensure that it is seated properly. Place the device on its stand so it remains stable while heating. Power and Heating: Plug the device into a power source and switch it on. If your model has an adjustable power setting, choose the appropriate one based on your project. Lower temperatures are better for delicate materials like paper or fabric, while higher temperatures work well for tougher materials such as wood and metal. Wait for a few minutes (usually around 3 to 5) for the device to heat up. Most models have a small indicator light to show when they are ready for use. Application: Once it’s heated, gently squeeze the trigger to release the melted adhesive onto the surface of your project. You can apply it directly to the material or in small dots depending on how much you need. Move the device slowly and steadily to ensure even distribution of the adhesive. For larger or heavier projects, apply more adhesive to ensure a secure bond. Bonding the Materials: Once the adhesive is applied, press the materials together firmly. The adhesive cools quickly, so you’ll have to act fast. Hold the materials in place for a few seconds to ensure a strong bond. If needed, you can use clamps or weights to hold the materials until the adhesive fully hardens. Resting the Device: After applying the adhesive, always rest the tool on its stand to avoid spills or accidental burns. If you are done using it, make sure to unplug it and allow it to cool down completely before storing it. What is the best hot glue gun? When it comes to choosing the best hot melt applicator, the Green Stuff World (GSW) Hot Glue Gun stands out as a top contender due to its innovative features designed for both safety and efficiency. This tool is highly regarded not only for its powerful bonding capabilities but also for the attention to detail in its design, which ensures ease of use, precision, and safety. Key Features that Make the GSW Hot Glue Gun the Best Choice: Brass Nozzle for Backflow Prevention One of the standout features of the GSW model is its brass nozzle, which is specifically designed to prevent backflow. This is a crucial innovation for anyone who has experienced the frustration of melted adhesive leaking or oozing out of a tool uncontrollably. The brass material is highly durable and heat-resistant, ensuring that the adhesive flows smoothly while preventing any messy backflow, even during extended use. This feature significantly enhances the precision and cleanliness of the tool, making it perfect for delicate crafting projects or precise repairs. Safety Stand Support Safety is a top priority when working with a tool that involves high temperatures, and the GSW applicator addresses this concern with its safety stand support. This sturdy stand allows you to rest the device securely between uses, minimizing the risk of accidental burns or damage to your workspace. The stand keeps the heated nozzle elevated, preventing it from coming into contact with surfaces, which could cause potential hazards. It’s an essential feature for maintaining a safe working environment, especially in busy workshops or home studios. Ergonomic Trigger for Comfort Another reason the GSW model is highly recommended is its ergonomic trigger. Unlike standard models that may cause hand fatigue during extended use, this applicator has a trigger designed to fit comfortably in your hand. This reduces strain, allowing you to work for longer periods without discomfort. The ergonomic design makes the GSW model a great option for professionals who use this tool for hours at a time, as well as for hobbyists who want a comfortable, user-friendly experience. Adjustable Temperature for Versatility The adjustable temperature control is a feature that sets the GSW applicator apart from many others on the market. With the ability to adjust the temperature from 100°C to 220°C, this model allows you to tailor the heat output depending on the material you’re working with. Lower temperatures are ideal for delicate projects involving materials like fabric, foam, or lightweight plastics, while higher temperatures provide the necessary heat for tougher materials like wood, metal, or ceramics. This versatility makes the GSW model suitable for a wide range of applications, from crafting and DIY repairs to more robust construction tasks. Consistent Performance and Fast Heating In addition to these specialized features, the GSW model offers consistent performance thanks to its high-power output of 120W to 150W. It heats up quickly, meaning you can get started on your projects in just a few minutes. The fast heating system ensures that you won’t waste time waiting for the tool to reach its optimal temperature, making it an efficient choice for both small and large projects. if you're looking for the best hot melt applicator on the market, the Green Stuff World Hot Glue Gun is a top-tier option. Its advanced features ensure not only high-quality results but also enhance the overall user experience, making your crafting, DIY, or repair projects smoother and more enjoyable. How to remove hot gun glue​? Removing hardened adhesive may seem tricky, but it can be done with the right approach. Here’s how to safely remove it: From Non-Porous Surfaces: For materials like glass, metal, or ceramics, you can usually peel off the adhesive once it has fully hardened. If it doesn’t come off easily, try applying rubbing alcohol or acetone to soften it before peeling. Be careful not to scratch the surface as you remove the adhesive. From Fabric or Other Delicate Materials: If adhesive gets on the fabric, wait for it to harden, then place the fabric in the freezer for about 30 minutes. The cold will harden the adhesive further, making it easier to peel off. For more stubborn spots, you can try using an iron. Place a piece of wax paper over the adhesive and run the iron over it on a low setting. The heat will soften the adhesive, and it will stick to the wax paper, pulling it away from the fabric. Using Heat: In some cases, you can reheat the adhesive using the same device you used to apply it. Hold the device a few inches away from the hardened adhesive to soften it, then scrape it off carefully with a blunt object like a butter knife or spatula. Just make sure the material you're working with can withstand the heat. Specialized Removal Tools: There are also adhesive removal tools available, which can help scrape away the adhesive without damaging the underlying surface. How to treat a hot glue gun burn​? Burns are a potential hazard when working with a high-temperature device like this, so it’s important to know how to treat them. Here’s what you should do if you accidentally burn yourself: Immediate Cooling: The first thing to do when you get burned is to cool the area immediately. Run cold water over the affected area for 10 to 15 minutes. Avoid using ice directly on the burn, as it can cause additional damage to the skin. If the adhesive is still on your skin, do not attempt to peel it off right away. Continue to flush the area with cold water until the adhesive solidifies, and then gently peel it off. Avoiding Further Damage: After the burn has cooled down, avoid touching or applying pressure to the area, as this can cause further damage. If the burn is severe or involves blistering, seek medical attention. Using Burn Cream: For minor burns, applying a burn cream or ointment can help soothe the area and promote healing. Aloe vera is also an excellent natural remedy for burns. It reduces pain and helps the skin recover more quickly. Protecting the Burn: After treating the burn, cover the area with a sterile bandage or dressing. This will help prevent infection and keep the burn clean. Change the dressing regularly, and keep an eye on the wound for any signs of infection such as increased redness, swelling, or pus. Seeking Medical Attention: If the burn is large, severe, or located on sensitive areas like the face, hands, or joints, it’s important to seek medical attention right away. Safety Considerations When using any tool that involves heat, safety is of the utmost importance. The GSW model includes several built-in safety features such as automatic temperature control to prevent overheating. However, it’s still essential to take precautions: Always Rest on the Stand: When not actively using the tool, always rest it on its stand to prevent accidental burns or spills. Unplug When Not in Use: After completing your project, be sure to unplug the device and allow it to cool down before storing it. Work in a Well-Ventilated Area: While most adhesive sticks are non-toxic, it’s still a good idea to work in a well-ventilated area to avoid inhaling any fumes. Keep Out of Reach of Children: Ensure that this tool is kept away from children and pets to prevent accidental burns or injuries.

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Bicycles printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45 x 25 mmScale: 1:58 - 1:48Content: 2x 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x70mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Miniature bases with Skill Rings 32 mm Enhance your Blood Bowl and fantasy football games with our complete pack of 10 versatile Blood Bowl Bases and 100 colored skill rings to represent all possible equipment options. They have been designed to accommodate up to 4 different skill rings per miniature. These bases feature fittings that allow for quick and easy exchange of skill rings between games or even during play. Our innovative system includes nine different interchangeable skill rings, allowing you to add both functionality and visual flair to your game. By mixing and matching various colors, you can give your miniatures a vibrant and engaging look. Whether you're playing a casual match with friends or competing in a league, this basing system will elevate your gameplay experience. The 32mm are perfect for standard player models, such as linemen, throwers, catchers, and blitzers. These core players fit well on the standard-sized squares of the game board. In contrast, the 40mm are designed for larger models, like Ogres, Trolls, Minotaurs, and Treemen. The larger ones provide stability for bigger figures and help distinguish them from regular players, enhancing both gameplay clarity and visual distinction. Additionally, this product includes two pre-drilled holes to fit 5x2mm magnets, or you can glue other sizes directly onto the inner supports. These neodymium magnets offer two key benefits: Magnetize Your Miniatures for Easy Transport: Secure your miniatures in a miniature carry case with ease. Interchangeable skill rings: Use the same Blood Bowl bases with skill rings on different miniatures without needing to change all the bases. Simply attach a coin or piece of metal to the miniature, allowing the neodymium magnet to hold it securely on the new base, making it easily interchangeable. Upgrade your Blood Bowl and fantasy football games with our 10-pack of versatile bases + 100 colored skill rings, designed for both functionality and aesthetic appeal. Content: x10 miniature bases 32mm (thickness 5mm) x20 Black arches x10 Red arches x10 Blue arches x10 Yellow arches x10 White arches x10 Grey arches x10 Green arches x10 Orange arches x10 Purple arches

Read more less

Laser Plants - Burdock GSW's array of realistic laser cut paper plants for making forest, jungle, swamp, or beach vegetation easily and effectively. Easy to assemble and to paint.  Instructions Carefully separate from the frame. It is recommended to use an airbrush to paint them but they can also be painted carefully by brush. Avoid using too much paint to not excessively dampen the material. Leave to dry completely before assembling. Assembly can be done using PVA glue or any type of glue, but it is especially recommended to use cyanoacrylate glue. Using varnish after painting adds resistance to plants. Contents 1 Sheet of 9.5x14.5cmQuantity of Leaves: 14 ground palm leaves Scale 1/48 - 1/35 - 1/32

Read more less

Grass Tufts 2 mm - color Burnt Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface. Although its built-in adhesive ensures a solid initial hold, applying a small amount of additional modeling glue on uneven surfaces is advisable to ensure permanent and optimal adhesion. They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature. For more realism combine them with our static grass, basing materials, and textured paints.  Fiber Size: 2 mm high  Plastic sheet size: 7x14 cm Content: 125 tufts

Read more less

Grass Tufts 12 mm - Winter Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface. Although its built-in adhesive ensures a solid initial hold, it is advisable to apply a small amount of additional modeling glue on uneven surfaces to ensure permanent and optimal adhesion. They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature. For more realism combine them with our static grass, basing materials, and textured paints.  Fiber Size: 12mm high  Plastic sheet size: 7x14 cm Content: 75 tufts

Read more less

Grass Tufts 2 mm - color Winter Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface. Although its built-in adhesive ensures a solid initial hold, applying a small amount of additional modeling glue on uneven surfaces is advisable to ensure permanent and optimal adhesion. They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature. For more realism combine them with our static grass, basing materials, and textured paints.  Fiber Size: 2 mm high  Plastic sheet size: 7x14 cm Content: 125 tufts

Read more less

Scatter Foliage Scatter ground foliage is realistic and high-quality scenic material designed to simulate the texture of fallen leaves on dirty and natural grounds. It will naturally blend with other foliage decorating wargame tables, railway layouts, miniature basing, or dioramas. Easy to glue with PVA glue. The scatter foliage is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200ml

Read more less

Fire Swords 3D printed set in resin This set of resin products created by Green Stuff World has been specially designed for miniatures games such as Warhammer: The Old World. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures and accessories with exceptional detail, enhancing your gaming experience. Bring a realistic touch to your bases, dioramas and figures using these high quality, ABS-like bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales. Selecting the right model glue and modelling tools is essential to assemble your Warhammer bits effectively and achieve optimum results. Understanding the project requirements, exploring the available options and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice and considering long-term maintenance are crucial to making informed decisions. These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale). Each set includes 20 x Fire Swords. #resin #3d #printed #greenstuffworld #swords #fire

Read more less

Splash Effect 3D set Get ready to bring the intensity of battle to your miniatures and dioramas with our incredible selection of flamethrower effects. From fiery flares to flames and smoke of varying intensities, we're here to help you create scenes that really set the imagination ablaze. With these resin bits, you'll be able to add a dose of realism and excitement to your modeling projects. Whether you're recreating war scenarios, sci-fi combat, or simply want to bring your miniatures to life in an impactful way, they're the perfect choice. Our product range includes flares ranging from subtle heat waves to impressive fire explosions, as well as flame and smoke effects to suit your creative needs. These special effects are meticulously designed to bring authenticity and detail to every scene, ensuring that your miniatures and dioramas are truly memorable. Made from high-quality materials, these resin items are durable and easy to apply, ensuring that you can concentrate on creating without worrying about the quality of the details. Don't let your projects run out of fire! Explore our collection today and discover how you can take your creations to the next level of intensity and excitement. With us, every scene will be a fiery experience that will leave a lasting impression on everyone who sees it. These products are delivered unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale). Each set includes 31 x Splash Effect #resin #3d #printed #clear #effect #splashes #greenstuffworld

Read more less

Ivy Foliage vegetation sheets from Green Stuff World are specialized sheets with leaves of different types, colors, and sizes designed to replicate the appearance of vine leaves and the leafiness of a tree on a miniature scale.  At Green Stuff World, we offer a wide selection of miniature basing materials, hobby leaves, vegetation, and many other types of paper plants for you to choose from to suit your project. With our variety of products, you can create scenes, figure and miniature bases, and dioramas quickly and easily, taking realism to a new level. Don't wait any longer and dive into the world of possibilities that our miniature branch and leaf mats have to offer. Add a touch of nature to your creations with Green Stuff World. Application and assembly:  If you are going to dress a wall of a building with miniature vines it is much more convenient to use a cyanoacrylate glue and go gluing some of the branches to the surface.  If you are going to make a miniature tree, it is advisable to use PVA glue or Tuft Glue. As there are many qualities of white glue and it is much easier to loosen the weeds from them, we strongly recommend using Tuft Glue for these functions so that it has a long-term hold. Recommended Scale: 1:35 - 1:43Leaf Type: MapleColor: Brown DryContent: 1x Realistic Ivy Foliage in 140x70mm

Read more less

Plasticard - Paving Brick Wall 1.2mm Embossed styrene plastic sheets can be used to create roofing, flooring, siding, rock, stone, metal plates, and other architectural parts. The sheets are demanded by architectural firms and hobbyists for their accurate, embossed detailing and versatility. Very easy to cut and glue.  Widely used in the modeling world, they can be used to create ceilings, floors, cladding, rock, stone, metal plate, and other architectural pieces. This set contains 1 Plasticard sheet in color brown Size: 200x300x0.8 mm Scale: 1:35 - 1:48 - 1:72

Read more less

Plasticard - Paving Brick Textured Sheet 8x18mm Embossed styrene plastic sheets can be used to create roofing, flooring, siding, rock, stone, metal plates, and other architectural parts. The sheets are demanded by architectural firms and hobbyists for their accurate, embossed detailing and versatility. Very easy to cut and glue.  Widely used in the modeling world, they can be used to create ceilings, floors, cladding, rock, stone, metal plate, and other architectural pieces. This set contains 1 Plasticard sheet in color brown Size: 200x300x0.5mm Scale: 1:35 - 1:48

Read more less

Acrylic Ink tranparant GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects. These inks offer exceptional versatility, allowing the creation of highly concentrated and intense colors when applied undiluted. Their high-quality pigmentation ensures that the colors maintain their vividness and strength. On the other hand, by diluting the inks, rich color transparencies are achieved that add depth and subtlety to compositions. This ability of acrylic ink to adapt to different techniques and artistic styles makes it a preferred choice for a wide variety of creative projects. The product comes in a glass bottle with a dispensing pipette, which allows you to precisely contour each drop of pigment to control the amount and intensity of the mixtures you work with, giving you the freedom to bring your visions to life with unparalleled clarity and precision. With acrylic inks, you can create everything from color filters to powerful effects of depth and luminosity. Their transparency allows you to play with light and color in a subtle and sophisticated way, creating works that captivate the eye and awaken the imagination. Main characteristics: Extremely pigmented. Matte finishes Vivid, fluid, and intense colors. It is not necessary to dilute it to use it with an airbrush or in calligraphy. Strong resistance to light. Compatible with all other GSW acrylic products and mediums. Wide range of opaque and transparent colors to meet various creative needs. Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PY110/PR122Finish: matteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Semi-transparent

Read more less