GreenStuffWorld

Martian Fluor Grass Green Stuff World's Martian Fluor Grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The Martian Fluor Grass is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml #static #grass #flock #greenstuffworld #200ml #grinch #green

Read more less

Ceramic bricks. Scale 1:24(1:52-1:48-1:35) Accessory kit for modellers that need superior level of detailed presentation. High quality bricks for precise building or loose scattering.May be painted subsequently with any colour and colour powders. Easy to cut, saw, drill and sanding. Size of the bricks: 10x4.8x3mm Color: Red Content: 200 bricks   #model #keramische #miniatuur #steentjes #stenen #rood #red #bricks #ceramic

Read more less

Acrylic texture for rust effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity. This paste is thick and has a dense consistency, suitable for representing rust textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 pot of 250ml textured paste Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken. #concrete #series #textured #paste #greenstuffworld

Read more less

Silicone Brushes – Colour Shapers BLACK SIZE #6 are excellent tools to paint and sculpt and add incredible effects when painting, modeling and sculpting with different paints, putties, clays and fimo. They are somewhere between a brush, a palette knife, a modelling tool and your fingers. Because they do not absorb paint like a brush, you can simply wipe them clean. Easy-to-clean and long lasting. Non absorbent - Silicone tips in colour black (FIRM hardness)  Valuable additional resource for anyone who enjoys painting in general or sculpting scales bigger than 54mm. They are a perfect complement to your artists brushes. The Colour Shaper allows you to move paint easily, apply pastel, carve images, sculpt clay and creatively decorate cakes with fondant.... the possibilities really are endless. This set is coming with 5 different brushes with 5 different tips with 12 mm length by 8 mm width - SIZE #6 Total length of the brushes 23 cm (around 9 inches)

Read more less

Elevate your dioramas to an unparalleled level of realism with our acrylic molds for modeling regular bricks. These accessories will allow you to create an infinite number of them with precision and consistency, adding authenticity and depth to your creations. They are specifically designed to create miniature regular bricks for use in scale modeling projects. Each model features a variety of patterns and textures that replicate real ones and that modelers will use to shape the air-drying clay. Our acrylic modeling molds are perfectly complemented by air-drying pastes such as modeling clay, foam clay, and similar products. These options guarantee a faithful and detailed reproduction for your diorama. Instructions for use: Using acrylic brick molds is a straightforward process, but it requires some care to ensure you get the best results. Here's a step-by-step guide on how to use these molds: Prepare the mold: Ensure that your acrylic brick mold is clean and dry. Make sure it's free of any debris or dust. Cover one side of the mold to hold the pieces. You can do this process with baking paper, wet oven paper, mylar plastic, or even airbrush masking tape. Place the mold on a flat surface: Find a flat and stable surface where you can work comfortably. Place the mold with the paper side down to prevent sticking. Add air-drying clay: Take a ball of air-drying clay and place it on the mold. Use your fingers to gently press and work the clay into the cavities of the mold. Make sure you fill each brick cavity completely. You may need to adjust the amount of clay to achieve your desired brick size and thickness. Level the surface: Use the included plastic spatula or the edge of another mold to drag/scrape across the surface of the mold, skimming off any excess clay. This will ensure that the surface is even and smooth. Let it dry: Allow the clay to dry completely. The air-drying paste has a small degree of shrinkage as it dries, which will help the pieces release from the mold. Remove the paper: Once the clay is completely dry, carefully peel off the paper tape from the back of the mold. This will help release the hobby bricks. Remove the pieces: Use a blunt stick (like the reverse end of a brush) to gently push out the individual bricks from the mold. Be careful not to apply too much pressure, as you don't want to damage the delicate acrylic mold. Smooth the edges: To give your bricks a more realistic look and get rid of any sharp edges, gently rub small amounts of them together between the palms of your hands. This will soften the edges and make the bricks look more like real bricks. Use the bricks: You can now use the air-dried clay bricks for your crafting or construction project. We recommend gluing the pieces with PVA glue or an acrylic sealer such as decoupe product (like ModPodge) to secure the pieces. Remember to handle the acrylic mold with care, as it's not as flexible as rubber or silicon molds and can break if bent.  With our methacrylate molds, your dioramas will come to life with authentic and captivating details - unleash your creativity and build sets that tell stories of their own! Take your projects to the next level of excellence with this essential accessory for lovers of high-quality dioramas. Quantity: 2x pack Scale: 1:35 (1:48-1:32) The thickness of the pieces: 3 mm Brick size: 2.85 x 5.7 mm Mould size: 6 x 11 cm

Read more less

Elevate your dioramas to an unparalleled level of realism with our acrylic molds for modeling regular bricks. These accessories will allow you to create an infinite number of them with precision and consistency, adding authenticity and depth to your creations. They are specifically designed to create miniature regular bricks for use in scale modeling projects. Each model features a variety of patterns and textures that replicate real ones and that modelers will use to shape the air-drying clay. Our acrylic modeling molds are perfectly complemented by air-drying pastes such as modeling clay, foam clay, and similar products. These options guarantee a faithful and detailed reproduction for your diorama. Instructions for use: Using acrylic brick molds is a straightforward process, but it requires some care to ensure you get the best results. Here's a step-by-step guide on how to use these molds: Prepare the mold: Ensure that your acrylic brick mold is clean and dry. Make sure it's free of any debris or dust. Cover one side of the mold to hold the pieces. You can do this process with baking paper, wet oven paper, mylar plastic, or even airbrush masking tape. Place the mold on a flat surface: Find a flat and stable surface where you can work comfortably. Place the mold with the paper side down to prevent sticking. Add air-drying clay: Take a ball of air-drying clay and place it on the mold. Use your fingers to gently press and work the clay into the cavities of the mold. Make sure you fill each brick cavity completely. You may need to adjust the amount of clay to achieve your desired brick size and thickness. Level the surface: Use the included plastic spatula or the edge of another mold to drag/scrape across the surface of the mold, skimming off any excess clay. This will ensure that the surface is even and smooth. Let it dry: Allow the clay to dry completely. The air-drying paste has a small degree of shrinkage as it dries, which will help the pieces release from the mold. Remove the paper: Once the clay is completely dry, carefully peel off the paper tape from the back of the mold. This will help release the hobby bricks. Remove the pieces: Use a blunt stick (like the reverse end of a brush) to gently push out the individual bricks from the mold. Be careful not to apply too much pressure, as you don't want to damage the delicate acrylic mold. Smooth the edges: To give your bricks a more realistic look and get rid of any sharp edges, gently rub small amounts of them together between the palms of your hands. This will soften the edges and make the bricks look more like real bricks. Use the bricks: You can now use the air-dried clay bricks for your crafting or construction project. We recommend gluing the pieces with PVA glue or an acrylic sealer such as decoupe product (like ModPodge) to secure the pieces. Remember to handle the acrylic mold with care, as it's not as flexible as rubber or silicon molds and can break if bent.  With our methacrylate molds, your dioramas will come to life with authentic and captivating details - unleash your creativity and build sets that tell stories of their own! Take your projects to the next level of excellence with this essential accessory for lovers of high-quality dioramas. Quantity: 2x pack Scale: 1:35 (1:48-1:32) The thickness of the pieces: 3 mm Brick size: 2.85 x 5.7 mm Mould size: 6 x 11 cm

Read more less

Elevate your dioramas to an unparalleled level of realism with our acrylic molds for modeling regular bricks. These accessories will allow you to create an infinite number of them with precision and consistency, adding authenticity and depth to your creations. They are specifically designed to create miniature regular bricks for use in scale modeling projects. Each model features a variety of patterns and textures that replicate real ones and that modelers will use to shape the air-drying clay. Our acrylic modeling molds are perfectly complemented by air-drying pastes such as modeling clay, foam clay, and similar products. These options guarantee a faithful and detailed reproduction for your diorama. Instructions for use: Using acrylic brick molds is a straightforward process, but it requires some care to ensure you get the best results. Here's a step-by-step guide on how to use these molds: Prepare the mold: Ensure that your acrylic brick mold is clean and dry. Make sure it's free of any debris or dust. Cover one side of the mold to hold the pieces. You can do this process with baking paper, wet oven paper, mylar plastic, or even airbrush masking tape. Place the mold on a flat surface: Find a flat and stable surface where you can work comfortably. Place the mold with the paper side down to prevent sticking. Add air-drying clay: Take a ball of air-drying clay and place it on the mold. Use your fingers to gently press and work the clay into the cavities of the mold. Make sure you fill each brick cavity completely. You may need to adjust the amount of clay to achieve your desired brick size and thickness. Level the surface: Use the included plastic spatula or the edge of another mold to drag/scrape across the surface of the mold, skimming off any excess clay. This will ensure that the surface is even and smooth. Let it dry: Allow the clay to dry completely. The air-drying paste has a small degree of shrinkage as it dries, which will help the pieces release from the mold. Remove the paper: Once the clay is completely dry, carefully peel off the paper tape from the back of the mold. This will help release the hobby bricks. Remove the pieces: Use a blunt stick (like the reverse end of a brush) to gently push out the individual bricks from the mold. Be careful not to apply too much pressure, as you don't want to damage the delicate acrylic mold. Smooth the edges: To give your bricks a more realistic look and get rid of any sharp edges, gently rub small amounts of them together between the palms of your hands. This will soften the edges and make the bricks look more like real bricks. Use the bricks: You can now use the air-dried clay bricks for your crafting or construction project. We recommend gluing the pieces with PVA glue or an acrylic sealer such as decoupe product (like ModPodge) to secure the pieces. Remember to handle the acrylic mold with care, as it's not as flexible as rubber or silicon molds and can break if bent.  With our methacrylate molds, your dioramas will come to life with authentic and captivating details - unleash your creativity and build sets that tell stories of their own! Take your projects to the next level of excellence with this essential accessory for lovers of high-quality dioramas. Quantity: 2x pack Scale: 1:35 (1:48-1:32) The thickness of the pieces: 3 mm Brick size: 2.85 x 5.7 mm Mould size: 6 x 11 cm

Read more less

Elevate your dioramas to an unparalleled level of realism with our acrylic molds for modeling regular bricks. These accessories will allow you to create an infinite number of them with precision and consistency, adding authenticity and depth to your creations. They are specifically designed to create miniature regular bricks for use in scale modeling projects. Each model features a variety of patterns and textures that replicate real ones and that modelers will use to shape the air-drying clay. Our acrylic modeling molds are perfectly complemented by air-drying pastes such as modeling clay, foam clay, and similar products. These options guarantee a faithful and detailed reproduction for your diorama. Instructions for use: Using acrylic brick molds is a straightforward process, but it requires some care to ensure you get the best results. Here's a step-by-step guide on how to use these molds: Prepare the mold: Ensure that your acrylic brick mold is clean and dry. Make sure it's free of any debris or dust. Cover one side of the mold to hold the pieces. You can do this process with baking paper, wet oven paper, mylar plastic, or even airbrush masking tape. Place the mold on a flat surface: Find a flat and stable surface where you can work comfortably. Place the mold with the paper side down to prevent sticking. Add air-drying clay: Take a ball of air-drying clay and place it on the mold. Use your fingers to gently press and work the clay into the cavities of the mold. Make sure you fill each brick cavity completely. You may need to adjust the amount of clay to achieve your desired brick size and thickness. Level the surface: Use the included plastic spatula or the edge of another mold to drag/scrape across the surface of the mold, skimming off any excess clay. This will ensure that the surface is even and smooth. Let it dry: Allow the clay to dry completely. The air-drying paste has a small degree of shrinkage as it dries, which will help the pieces release from the mold. Remove the paper: Once the clay is completely dry, carefully peel off the paper tape from the back of the mold. This will help release the hobby bricks. Remove the pieces: Use a blunt stick (like the reverse end of a brush) to gently push out the individual bricks from the mold. Be careful not to apply too much pressure, as you don't want to damage the delicate acrylic mold. Smooth the edges: To give your bricks a more realistic look and get rid of any sharp edges, gently rub small amounts of them together between the palms of your hands. This will soften the edges and make the bricks look more like real bricks. Use the bricks: You can now use the air-dried clay bricks for your crafting or construction project. We recommend gluing the pieces with PVA glue or an acrylic sealer such as decoupe product (like ModPodge) to secure the pieces. Remember to handle the acrylic mold with care, as it's not as flexible as rubber or silicon molds and can break if bent.  With our methacrylate molds, your dioramas will come to life with authentic and captivating details - unleash your creativity and build sets that tell stories of their own! Take your projects to the next level of excellence with this essential accessory for lovers of high-quality dioramas. Quantity: 2x pack Scale: 1:35 (1:48-1:32) The thickness of the pieces: 3 mm Brick size: 2.85 x 5.7 mm Mould size: 6 x 11 cm

Read more less

Martian Texture Acrylic Paste 30 ml by Green Stuff World, is an exceptionally versatile product that has become a must-have for modelers, hobbyists, and creative craft enthusiasts. This textured acrylic paint has gained popularity thanks to its ability to transform your bases for miniatures, dioramas, and a wide range of art projects into true masterpieces of realism. With its rich shade, this texturing paste allows you to perfectly recreate the appearance of martian textures on diorama bases, scenes, or vignettes. High-quality formula and dense consistency allow you to apply it with precision, modeling terrains ranging from arid deserts to lush rural landscapes. The versatility of this textured paints is further highlighted by its ability to adhere firmly to a variety of surfaces, such as plastic, resin, wood, and more. This makes it an ideal choice for customizing and bringing life to your miniatures, models, and dioramas. It allows you to texturize and color a surface with a single application in the desired thickness. It dries quickly, which speeds up the work process and allows you to move forward with your project efficiently.  Whether you are creating an epic battle scene, a tranquil rural landscape or detailed scenery for your miniatures, this texturing paste is the perfect tool to add that touch of authenticity that will make your projects stand out. Discover the world of creative possibilities that Green Stuff World Martian Texturing Paste offers you and elevate your crafts and creations to an impressive level of realism. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 bottle of 30ml textured paste #earth #series #textured #paste #greenstuffworld

Read more less

Range of extra opaque acrylic colors, including white opaque for model making and handicrafts. This range is a specially developed line of paints designed for hobby modeling and miniature painting including 24 unsaturated opaque colors in pigmentation but with a high coverage capacity. They are not transparent or see-through and when applied to a surface, they cover what's underneath, hiding any previous layers or simply using fewer coats, most of the time just one coat. They are thicker and have a high pigment concentration, which makes them excellent for achieving solid and vibrant color coverage. They are commonly used in crafts, and hobbies like model painting, to create rich and creative finishes. Use them as a base paint to start your projects, or in those places where high coverage is necessary. Complement them with other model paints or inks to add saturation and color intensity. Dilute it with water or acrylic thinner to be able to use it with an airbrush. This range is sold in dropper bottles with a metal agitator ball that will allow you a quick mixing. This type of dropper bottle, with the help of its nozzle, will also extend a lot of its shelf life by practically isolating contact with air. Content: 1x 17ml

Read more less

Range of extra opaque acrylic colors, including white opaque for model making and handicrafts. This range is a specially developed line of paints designed for hobby modeling and miniature painting including 24 unsaturated opaque colors in pigmentation but with a high coverage capacity. They are not transparent or see-through and when applied to a surface, they cover what's underneath, hiding any previous layers or simply using fewer coats, most of the time just one coat. They are thicker and have a high pigment concentration, which makes them excellent for achieving solid and vibrant color coverage. They are commonly used in crafts, and hobbies like model painting, to create rich and creative finishes. Use them as a base paint to start your projects, or in those places where high coverage is necessary. Complement them with other model paints or inks to add saturation and color intensity. Dilute it with water or acrylic thinner to be able to use it with an airbrush. This range is sold in dropper bottles with a metal agitator ball that will allow you a quick mixing. This type of dropper bottle, with the help of its nozzle, will also extend a lot of its shelf life by practically isolating contact with air. Content: 1x 17ml

Read more less

Ivy Foliage vegetation sheets from Green Stuff World are specialized sheets with leaves of different types, colors, and sizes designed to replicate the appearance of vine leaves and the leafiness of a tree on a miniature scale.  At Green Stuff World, we offer a wide selection of miniature basing materials, hobby leaves, vegetation, and many other types of paper plants for you to choose from to suit your project. With our variety of products, you can create scenes, figure and miniature bases, and dioramas quickly and easily, taking realism to a new level. Don't wait any longer and dive into the world of possibilities that our miniature branch and leaf mats have to offer. Add a touch of nature to your creations with Green Stuff World. Application and assembly:  If you are going to dress a wall of a building with miniature vines it is much more convenient to use a cyanoacrylate glue and go gluing some of the branches to the surface.  If you are going to make a miniature tree, it is advisable to use PVA glue or Tuft Glue. As there are many qualities of white glue and it is much easier to loosen the weeds from them, we strongly recommend using Tuft Glue for these functions so that it has a long-term hold. Recommended Scale: 1:72 - 1:87Leaf Type: OakColor: BrownContent: 1x Realistic Ivy Foliage in 140x70mm

Read more less

Hobby Micro Rivets - piramid studs In the realm of modeling and miniatures, Hobby Micro Rivets and miniature metal fasteners play a vital role in simulating the appearance of connections and joints. These small raised elements, commonly found on a variety of objects like AFVs, civilian vehicles, aircraft, and structures, enhance the level of detail and realism in models. By replicating the look of actually fastened joints, Hobby Micro Rivets bring authenticity to models, and their representation can vary depending on scale, materials used, and the modeler's personal preferences. Hobby Micro Rivets are particularly popular for converting Gunpla, Gundams, and futuristic robots, as they add intricate details to these imaginative creations. Notably, even in the Warhammer 40,000 universe, Orks have recognized the value of a tiny metal rivet in their construction projects. The Orks rely on their unique technological abilities driven by the "Waaagh!" energy, a belief system where collective faith in something's efficacy makes it work. This enables the Orks to create functional machinery and structures despite their primitive designs. The use of these miniature fasteners aligns with the Orks' construction approach, as they often repurpose salvaged materials, resulting in rugged-looking structures. Adding an extra layer of stability and reinforcement, these bolts fortify the joints, allowing Ork structures to endure the violent demands of warfare. The application of a rivet in modeling and miniatures encompasses several purposes: Visual intricacy: They visually represent the bolts found in real-life objects, enhancing the model's complexity and realism. Authenticity: Their inclusion contributes to a more accurate representation of the subject being modeled. You can create your own rivets and nuts with our silicone mould with any kind of putties and resins. For hobbyists seeking to enhance their projects, a set of 3D-printed slotted hexagon miniature fasteners, including various shapes and sizes, is now available. Crafted with precision using high-quality resin, these elements allow modelers to add intricate details to their kits, bringing them to life. Each set of rivets offers over 130 meticulously crafted bolts, enabling modelers to add precise and refined embellishments to their creations. With these hobby micro bolts at hand, you can elevate your modeling experience, immersing yourself in the art of miniature construction. This product comes unpainted and is ideal for 25-28-35 mm miniatures (1:76, 1:48, 1:35). This is a 3D-Printed Set that contains more than 130x #resin #3d #printed #piramid #studs #rivets #small #greenstuffworld

Read more less

Dry brush paint Dry brushing is a popular technique used in the scale modeling and wargaming community for creating a variety of effects. This technique involves using brushes with a small amount of paint to selectively highlight raised areas of a model, terrain piece, or miniature figure.  Dry brush paints are specifically designed and are thicker than traditional ones and have a higher pigment concentration, allowing the user to layer gradually to build up the desired effect and therefore making them ideal for creating a more subtle effect. They have a unique texture and consistency, which can help to create specific effects such as rust, weathering, or stone texture. It is important to use a good quality, flat or round brush with flexible bristles. This will help to create the desired effect and ensure that the paint is applied evenly and without damaging their bristles. The brush should be loaded with a small amount of paint, and the excess should be removed before applying it to the model or terrain piece. This will help to prevent clumping and ensure that the paint is applied smoothly. These paints are a great option for those who are new to the dry brushing technique, which can be used in a variety of applications, from highlighting the details of miniature figures to creating a weathered appearance on vehicles and terrain pieces. It is a versatile technique that can be used on a range of surfaces.  Common uses in modeling for Dry Brush Paints These paints, in particular, are often used in this Dry Brushing technique. Here are some common uses in modeling: Highlighting details: They are often used to highlight the details on miniature figures, such as wrinkles in clothing, facial features, and weapons. Creating weathering effects: They are ideal for creating weathering effects on models, such as rust, dirt, and grime. By lightly dragging a dry paintbrush loaded with paint over the surface of the model, it creates a worn, weathered appearance. Adding texture: They can be used to add texture to a model's surface. For example, a dry brush with silver can be used to create the appearance of scratches on metal surfaces. Enhancing contrast: They can also be used to enhance contrast on a model's surface, creating a more visually appealing appearance. This is particularly useful when painting terrain pieces or large models. Painting scenery: They can be used to paint scenery, such as rocks, trees, and buildings. By using a dry brushing technique, it creates a more realistic appearance with subtle shades and highlights. Content: 30ml #dry #brush #paint #greenstuffworld #modeling #dry #violet

Read more less

Deze ink heeft veel pigment en is een verf met zowel aquarel als acrylverf functies. Normaal moet je acryl verf verdunnen om goed te vloeien, deze verf vloeit in plooien, kieren, kleine gaatjes, en andere reliefpunten. Hierdoor krijg je diepte zonder veel werk. Zeer heldere kleuren door de hoge graad aan pigment, duidelijke dekking. Met een kwast of airbrush aanbrengen. De verf droogt dekkend op (dus niet als een wash ink als aquarelverf) op oppervlakten maar gaat zich vooral hechten in groeven, hoeken, diepte, gaatjes, oneffenheden etc. Een bijzondere goede kwaliteit verf. Elk flesje heeft 17ml inhoud. Verdund of onverdund gebruiken op allerlei soorten ondergrond. Eventueel bij teveel verdund gebruik kan er nog een laag aangebracht worden. Droogt mat op. Kan gemengd worden met andere acrylverf kan over andere laag Intensity Ink worden aanbracht waardoor kleurverrijking ontstaat.

Read more less

Glow in the dark Acrylic Resin that gets cured under ultraviolet (UV) or direct sunlight in minutes. Perfect to replicate different magical, toxic or ghostly effects. Contains: 17ml *Check the colours of the example photos in natural light and in the dark when uploaded, as they may be different. CAUTION: Keep out of reach of children. May be harmful if swallowed. Not edible. Causes Skin Irritation. Causes serious eye irritation. May cause an allergic skin reaction. Keep in mind that the resin will remain in its gel state indefinitely until a source of natural light or ultraviolet light comes into contact with it.Do not expose the inside of the bottle to natural light, otherwise the gel could start a reaction and crystallize. UV resin warnings - Environmental conditions can affect the properties of the material- Use in a dry, ventilated place and at a temperature between 18 ° C and 25 ° C is recommended. Extreme cold and heat can damage the material.- Use under inadequate conditions, inadequate exposure to UV light or insufficient UV light output can result in the surface feeling tacky after curing. In this case, we recommend applying more UV light or gloss varnish.- We recommend consuming the product within 10 months. The shelf life of the product may decrease after opening depending on the state of preservation, exposure to UV light and low temperatures. Ideaal voor dobbelstenen, scenery en diorama op bases. #resin #glow #dark #greenstuffworld #light #orange

Read more less

Water effect Gel - 250ml Transparent acrylic gel specially designed to replicate moving water, waves, and splashes with a realistic finish. It is perfect to achieve a depth effect as well as a realistic watercolor which makes it ideal for naval dioramas or for scenery with smaller aquatic features such as river streams and puddles. Splash gel dries in 24 hours, although it could be more or less depending on the thickness of the application.The texture is thick enough to be poured onto all kinds of surfaces, even slopes. It is recommended to apply in thin layers, adding multiple layers if necessary. You can model the surface while it dries using old brushes, sculpting tools, or toothpicks to create water wave crests, waterfalls, and rough seas, among others. It can be diluted either with water or acrylic thinner to change the consistency and mix it with other products of the same range or small amounts of acrylic inks to slightly change the color. Content: 250ml #water #gel #effect #greenstuffworld #splash #250ml #deep #blue

Read more less

Candy Inks GSW's range of Candy Inks. Their excellent brightness and transparency allow them to be used for colour filters for modifying metals, gems, glass, lights, visors... or any other parts which you would want to intensify their colours. Dries fast for a gloss and smooth finish. Can be applied by brush and airbrush.- Applying by brush will yield a lacquered and intense finish. It must be left to dry completely and big cumulations of paint should be avoided, as this will affect their properties.- If using an airbrush, the colour filters will be thinner and can be used to modify the chameleon colours, as well as for other metallic or transparent effects. Contains: 17 ml examples with metallic paint *NOTE: Do not use this paint with alcohol based thinners as it damages the paint and could clog the airbrush. The GSW thinner and airbrush cleaner are perfectly compatible with this paint. #candy #ink #tiger #eye #brown #greenstuffworld

Read more less

Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld

Read more less

Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld

Read more less

Statisch Gras Green Stuff World's statisch gras heeft een realistisch kleur en is van de hoogste kwaliteit. Speciaal ontwikkeld om de bases van je miniaturen mee te bewerken, voor scenery of terrein. Gebruik witte PVA lijm, green stuff world tufts lijm of een statisch geladen apparaatje (flock box bijv) om de sprietjes omhoog te krijgen. Dit statisch gras is verpakt in handige potjes van 200ml zodat je je werkplek netjes kan houden, gras niet overal heen ontsnapt etc. De hoeveelheid is voldoende om de voeten van 1 of 2 fracties te kietelen dan wel een een dubbele A4 met een flinke laag te voorzien. Grasspriet hoogte: 9-12 mm Kleur: brown moor Static Grass Green Stuff World's static grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The static grass flock is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml brown moor #static #grass #flock #greenstuffworld #200ml #brown #moor

Read more less

Statisch Gras Green Stuff World's statisch gras heeft een realistisch kleur en is van de hoogste kwaliteit. Speciaal ontwikkeld om de bases van je miniaturen mee te bewerken, voor scenery of terrein. Gebruik witte PVA lijm, green stuff world tufts lijm of een statisch geladen apparaatje (flock box bijv) om de sprietjes omhoog te krijgen. Dit statisch gras is verpakt in handige potjes van 200ml zodat je je werkplek netjes kan houden, gras niet overal heen ontsnapt etc. De hoeveelheid is voldoende om de voeten van 1 of 2 fracties te kietelen dan wel een een dubbele A4 met een flinke laag te voorzien. Grasspriet hoogte: 4-6 mm Kleur: winterfall grass Static Grass Green Stuff World's static grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The static grass flock is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml winterfall grass #static #grass #flock #greenstuffworld #200ml #winterfall

Read more less

Statisch Gras Green Stuff World's statisch gras heeft een realistisch kleur en is van de hoogste kwaliteit. Speciaal ontwikkeld om de bases van je miniaturen mee te bewerken, voor scenery of terrein. Gebruik witte PVA lijm, green stuff world tufts lijm of een statisch geladen apparaatje (flock box bijv) om de sprietjes omhoog te krijgen. Dit statisch gras is verpakt in handige potjes van 200ml zodat je je werkplek netjes kan houden, gras niet overal heen ontsnapt etc. De hoeveelheid is voldoende om de voeten van 1 of 2 fracties te kietelen dan wel een een dubbele A4 met een flinke laag te voorzien. Grasspriet hoogte: 2-3 mm Kleur: brown moor Static Grass Green Stuff World's static grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The static grass flock is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml Brown moor #static #grass #flock #greenstuffworld #200ml #brown #moor

Read more less

Matte acrylic texture for splash mud effects developed to create extreme realism. Texturizes and colors the surface, apply projected or splatter for more realism. It can be diluted with water or an acrylic thinner to modify its fluidity. This paste has a semi-liquid consistency, suitable for representing surfaces splattered or stained with mud on a diorama, vehicles in a diorama, or vignette bases. It can be easily projected with a brush, a toothbrush with a quick movement of the hand, or with the help of an airbrush. Dries in 2-10 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 bottle of 30ml textured paste Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken. #earth #series #textured #paste #greenstuffworld

Read more less

Figuur roller Hexagons - Zeshoekig Roller voorzien van een basisfiguur waarmee een continu herhaald patroon op klei en plamuren kan worden gedrukt. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende texturen die u kunt kopen op basis van uw specifieke behoeften.Lengte: 14'50 cm (5'5 inches)Diameter: 2'5cm (1 inch) Patroonafmetingen: 10x10 mm Aanbevolen schaal: 1/35-1/43-1/48-1/76 GEBRUIK INSTRUCTIES of bekijk deze video1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een basis, gebruik dan een MDF basis. Dit omdat je de polymeerklei direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood, maar maak je geen zorgen dat het zal branden! Wil je alleen een prachtig pad, veranda, straat of iets anders maken dan kun je dit natuurlijk op een platte plaat drogen in de oven.In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller of de klei enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de rollen na gebruik goed te reinigen.Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de deegroller te verwijderen, indien nodig. Om de veiligheid te garanderen, moeten kinderen nauwlettend worden gecontroleerd door een verantwoordelijke volwassene.

Read more less

Met een kwast of airbrush aanbrengen. De verf droogt dekkend op (dus niet als een wash ink als aquarelverf) op oppervlakten maar gaat zich vooral hechten in groeven, hoeken, diepte, gaatjes, oneffenheden etc. Een bijzondere goede kwaliteit verf. Elk flesje heeft 17ml inhoud. Verdund of onverdund gebruiken op allerlei soorten ondergrond. Eventueel bij teveel verdund gebruik kan er nog een laag aangebracht worden. Droogt mat op. Kan gemengd worden met andere acrylverf kan over andere laag Intensity Ink worden aanbracht waardoor kleurverrijking ontstaat.

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Pre-painted ruined concrete walls compatible with the Bolt Action, Warhammer 40,000, Kill Team, Necromunda, Infinity, Star Wars Legion, Marvel Crisis Protocol, and Fallout Wasteland Warfare  This set of corners and pre-painted concrete walls is designed to create urban, industrial, or post-apocalyptic scenarios on your gaming tables, providing solid cover, blocking lines of sight, and defining corridors, courtyards, and combat zones with a realistic aged concrete look. Due to their scale and use, they are ideal for miniature tabletop games or wargames where the terrain defines the tactics. Specifically, they are compatible with Bolt Action, Warhammer 40,000, Kill Team, Necromunda, Infinity, Star Wars Legion, Marvel Crisis Protocol, Fallout Wasteland Warfare, or modern role-playing games and skirmishes. Use them as perimeter walls, barricades, modular ruins, or zone dividers to add three-dimensionality and a more cinematic feel to your games. The widths of the walls are based on the inch system and the typical grid size of many boards: the shortest section measures 2.5 cm (1 inch) and the longest 7.5 cm (3 inches), allowing corners to be joined together and pieces to be easily combined to build clean and stable corners, turns, and enclosures. This set of pre-painted terrain is quick and easy to assemble, thanks to its interlocking system, with no glue required to play. However, if you prefer to fix them permanently, we recommend PVA glue; avoid cyanoacrylate if you don't want to risk damaging or whitening painted surfaces. Material: MDF woodContents: 16 fully pre-painted brick wallsHeight: 5 cmWidths: from 2.5 cm to 7.5 cm (inch system)

Read more less

Pre-painted ruined brick walls compatible with the Bolt Action, Warhammer 40,000, Kill Team, Necromunda, Infinity, Star Wars Legion, Marvel Crisis Protocol, and Fallout Wasteland Warfare  This set of corners and pre-painted brick walls is designed to create urban, industrial, or post-apocalyptic scenarios on your gaming tables, providing solid cover, blocking lines of sight, and defining corridors, courtyards, and combat zones with a realistic aged concrete look. Due to their scale and use, they are ideal for miniature tabletop games or wargames where the terrain defines the tactics. Specifically, they are compatible with Bolt Action, Warhammer 40,000, Kill Team, Necromunda, Infinity, Star Wars Legion, Marvel Crisis Protocol, Fallout Wasteland Warfare, or modern role-playing games and skirmishes. Use them as perimeter walls, barricades, modular ruins, or zone dividers to add three-dimensionality and a more cinematic feel to your games. The widths of the walls are based on the inch system and the typical grid size of many boards: the shortest section measures 2.5 cm (1 inch) and the longest 7.5 cm (3 inches), allowing corners to be joined together and pieces to be easily combined to build clean and stable corners, turns, and enclosures. This set of pre-painted terrain is quick and easy to assemble, thanks to its interlocking system, with no glue required to play. However, if you prefer to fix them permanently, we recommend PVA glue; avoid cyanoacrylate if you don't want to risk damaging or whitening painted surfaces. Material: MDF woodContents: 16 fully pre-painted brick wallsHeight: 5 cmWidths: from 2.5 cm to 7.5 cm (inch system)

Read more less

Metallic Acrylic Paint – Vivid Metal Color SeriesGSW's Vivid Metal Colors series takes metallic finishes to another level, offering extraordinarily vivid, intense colors that are hard to find in the world of model making. These almost unique shades provide a striking metallic sheen thanks to their intense colors, adding a distinctive touch to any miniature, model, or scenery piece. Formulated with the highest quality ultra-fine pigments, these pearl-based metallic paints provide a truly stunning metallic effect, guaranteeing professional results even on small or highly detailed surfaces. Their coverage, combined with fast drying, allows you to work comfortably and efficiently. They can be combined with each other or with other paints and auxiliary products such as varnishes, although it is recommended to use gloss varnish, satin varnish, or our chrome varnish. They can also be combined with our range of Candy Inks or our range of Interference or Metal Filter paints: They can be used together with candy inks, due to their high transparency and shine, acting as color filters on metallic surfaces, gems, crystals, or lights, allowing you to modify and enhance the base metallic tone without losing definition. By applying a very thin layer of ink to the already painted metal, you can achieve unique color variations—intensifying reds, greens, blues, or intermediate shades—for vibrant and deep visual effects.They can also be used in conjunction with the range of metal filters, which provide reflections that change depending on the angle of the light, generating pearly or iridescent sparkles that transform the metallic finish into something much more dynamic. This combination allows you to create striking special effects, from armor with changing sparkles to details with an almost magical appearance, producing results that stand out both on the table and in the display case.The Vivid Metal Color series is water-based and completely non-toxic, and is optimized for use with both brushes and airbrushes. For optimal performance with an airbrush, we recommend starting with a 1:1 dilution with acrylic thinner. Each bottle includes a stainless steel ball to ensure a homogeneous mixture that is ready to use in seconds. Contents: 6 x 17 ml 1x Purple Passion1x Kingsfall Gold1x Ironleaf Green1x Anvil Blue1x Flameflare Red1x Cosmic Silver

Read more less

The stackable tournament tray for miniatures from Green Stuff World is a transport and storage system designed to move miniatures neatly from game to game within a tournament, as well as between the storage area and the gaming table at home or at your club. Its design is optimized for use with magnetized miniatures, making it easy to position and move them during games, events, or tournaments. The base of this stackable tray is metalized, ensuring the figures remain secure on the surface during transport. This feature helps prevent unwanted movement when moving the Warhammer tray from one place to another and keeps the miniatures in their original arrangement without having to handle them individually each time their position is changed. This stackable tournament tray requires assembly and features thick side handles integrated into the structure itself, designed to facilitate a secure grip during manual transport and provide a more stable hold when lifting or moving the tray. We recommend using PVA glue for assembly; once assembled, the tray cannot be disassembled, enhancing its structural integrity and durability while preventing the loss of set components. Multiple transport trays can be stacked on top of one another, allowing you to organize miniatures by faction, army, project, or game system within a shelf, cabinet, or workspace. This feature also makes it easier to move several trays at once from storage to the gaming table, especially when working with multiple groups of miniatures or entire armies. The structure is made of black MDF, a material commonly used in organization and modeling accessories due to its balance between rigidity and weight. The black finish provides a uniform and discreet appearance, allowing it to blend visually with other storage elements, painting stations, or hobby furniture. The choice of this material also helps maintain a stable construction without resorting to complex components. The product is designed for easy assembly. The parts snap together quickly, allowing the transport tray to be ready for use in no time. Once assembled, the tray can be used both as a temporary stand during games and as a more permanent storage solution at home. Its design allows miniatures to remain in place and ready to be moved when necessary. These stackable Warhammer trays are used to transport miniatures between different tables during tournaments or gaming sessions, particularly Warhammer 40k tournaments, though they are especially useful in home settings, allowing entire units to be kept together on a single tray. This helps prevent individual transfers and accidents, simplifies pre-game organization, and reduces direct handling of painted miniatures. Contents: 1 tournament tray + 2 adhesive metalized rubber sheets for magnetized miniaturesUsable area: 300x420mm (11.8 x 16.53 inches)

Read more less

Candelabra with candlesSet of resin bits: Standing Candle Holders with candles. A perfect accessory to bring life to castle interiors, arcane libraries, dungeons, or gloomy taverns. Each piece has been designed with a high level of detail, accurately capturing every relief of the different candelabras, the melted candle wax, and the shapes of the flames. They are printed in high-quality 3D printing resin, which offers great definition, making it easier to highlight metallic textures or lighting effects during painting. This set includes 8 different candlestick designs to make your dioramas realistic, including pieces to illuminate castle tables, antique dining rooms, or set the scene for chaotic rituals. This product is sold unpainted and is perfect for 1:48 scales. Includes: x12 Standing Candle Holders 1:48

Read more less