GreenStuffWorld

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using Sculptor Vaseline (LINK). Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush (LINK) and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult. 

Read more less

The Green Stuff World hand sandpaper holder or hand sanding block is a sturdy yet lightweight tool, 3D printed in high-strength PLA, and offers the ultimate solution for achieving flawless surfaces in scale modeling, wargaming, dioramas, and cosplay. Its ergonomic design provides a comfortable and precise grip, allowing for both rough sanding and fine polishing on miniatures, 3D-printed parts, or EVA foam armor. Available in two versions — flat and curved — the holder adapts to any geometry: straight vehicle edges, organic scenic-base contours, or pronounced curves on helmets and pauldrons. The internal clamp keeps wet- or dry-sandpaper sheets perfectly taut and wrinkle-free, whatever the grit thickness. Its width matches exactly half a sheet of Green Stuff World’s standard sandpaper, maximising the use of every sheet; nevertheless, it can be used with paper from any other brand, making it a versatile, indispensable addition to your workbench. Dimensions: 45 mm wideSurface: CurvedContents: 1 ×

Read more less

The Green Stuff World hand sandpaper holder or hand sanding block is a sturdy yet lightweight tool, 3D printed in high-strength PLA, and offers the ultimate solution for achieving flawless surfaces in scale modeling, wargaming, dioramas, and cosplay. Its ergonomic design provides a comfortable and precise grip, allowing for both rough sanding and fine polishing on miniatures, 3D-printed parts, or EVA foam armor. Available in two versions — flat and curved — the holder adapts to any geometry: straight vehicle edges, organic scenic-base contours, or pronounced curves on helmets and pauldrons. The internal clamp keeps wet- or dry-sandpaper sheets perfectly taut and wrinkle-free, whatever the grit thickness. Its width matches exactly half a sheet of Green Stuff World’s standard sandpaper, maximising the use of every sheet; nevertheless, it can be used with paper from any other brand, making it a versatile, indispensable addition to your workbench. Dimensions: 45 mm wideSurface: FlatContents: 1 ×

Read more less

Resin street signs 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. This item includes 20x plasticard profiles, 2.5 mm wide and 50 mm, for holding road signs. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:48 miniatures. Scale: 1:48Content: 18x 

Read more less

Printed Park Trash Cans - Round (pack x 4) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 16x20x16mm - 16x30x18mmScale: 1:58 - 1:48Content: 4x Park Trash Cans - Round

Read more less

Waiting City Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 47x26x21mmScale: 1:58 - 1:48Content: 2x

Read more less

Waiting Park Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45x25x24mmScale: 1:58 - 1:48Content: 2x

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Miniature Windows - Classic Arched - Large Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Read more less

Give your army a heavenly and mystical touch with our exclusive collection of 40K Cherub Angels, 3D printed resin bits. These detailed 40k Cherubs figures will transform your miniatures, miniature bases, and scenarios into true masterpieces, bringing a divine and dark gothic grimdark air to your games. Our online store specializes in offering sets of mechanical, diabolical angels, and other small flying minions, designed to be compatible with a variety of fantasy miniature games such as 9th Age, ASOIAF, WHF, Warhammer 40K, and the reborn WH the Old World. Made from ABS-like high-quality resin for 3D printers, these bits stand out for their exceptional level of detail, perfect for a fantasy aesthetic in a dark science fiction universe that fits perfectly into the grimdark aesthetic. From small Angel Cherubs with scrolls to winged figures with sensors and relics, each piece is designed to be compatible with your 1:48 miniatures, offering you the possibility to customize and give a unique look to your figures and squads. Whether you are an enthusiastic modeler or a wargamer, these Warhammer bits that are compatible will allow you to enrich your conversions and make your heroes or special units stand out on the battlefield. These cherubims are delivered unpainted and in their printing matrix, with easy-to-remove stands so you can assemble them without complications and adapt them to your army. For precise assembly, in our store, you will find essential modeling tools such as modeling glue, specialized model paints, and ultra-flat precision modeling pliers, ideal for working with resin and ensuring clean and professional assemblies. Contents: 4x

Read more less

Terracotta Red Mars Earth Effect Texture Acrylic Paste 250 ml by Green Stuff World, is an exceptionally versatile product that has become a must-have for modelers, hobbyists, and creative craft enthusiasts. This textured acrylic paint has gained popularity thanks to its ability to transform your bases for miniatures, dioramas, and a wide range of art projects into true masterpieces of realism. With its rich reddish terracotta shade, this texturing paste allows you to perfectly recreate the appearance of earth textures on diorama bases, scenes, or vignettes. High-quality formula and dense consistency allow you to apply it with precision, modeling terrains ranging from arid deserts to lush rural landscapes. The versatility of this textured paints is further highlighted by its ability to adhere firmly to a variety of surfaces, such as plastic, resin, wood, and more. This makes it an ideal choice for customizing and bringing life to your miniatures, models, and dioramas. It allows you to texturize and color a surface with a single application in the desired thickness. It dries quickly, which speeds up the work process and allows you to move forward with your project efficiently.  Whether you are creating an epic battle scene, a tranquil rural landscape or detailed scenery for your miniatures, this texturing paste is the perfect tool to add that touch of authenticity that will make your projects stand out. Discover the world of creative possibilities that Green Stuff World Terracotta Earth Effect Texturing Paste offers you and elevate your crafts and creations to an impressive level of realism. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 pot of 250ml textured paste

Read more less

Acrylic starter kit for Painting Fantasy miniatures from Green Stuff World This is a Maxx Formula Acrylic Paint Set specifically formulated for use in painting models, miniatures, and dioramas. It includes a range of highly pigmented acrylic colors perfect for hobbyists who want to take their projects to the next level and achieve professional-looking results. The Maxx Formula Hobby Sets by Green Stuff World is an exceptional product that offers high-quality paints in a range of vibrant colors. These acrylic paints are highly pigmented and offer a high-coverage and smooth matte finish. They are made using new-generation pigments that have been specially selected by experienced artists to provide hobbyists with the highest quality acrylics possible. One of the key features of these acrylics is the use of dropper bottles. These bottles are designed for easy and precise dispensing of the paint and a controlled flow of paint. They are perfect for hobbyists who need to apply the paint exactly where they need it, without wasting any. The dropper bottles also include a metal ball that helps the mixing thoroughly and ensures even distribution throughout the bottle. This feature is particularly useful for hobbyists who may not use them regularly, as it prevents the pigment from settling at the bottom of the bottle over time. Additionally, the dropper bottle has a tight-fitting cap that seals the bottle tightly, preventing air from entering and drying out the paint. This helps to ensure that the colors remain fresh and usable for a long time, even if it is not used frequently. These are versatile colors that can be used with both brush and airbrush techniques. Hobbyists can also use these paints with an airbrush when slightly diluted with Acrylic Thinner, allowing them to achieve a range of effects that would otherwise be difficult to achieve. This versatility makes the range ideal for those who want to experiment with different painting techniques and achieve different effects. Whether you're a beginner or an experienced hobbyist, the Maxx Formula Hobby Set can help you take your projects to the next level. This product is water-based, non-toxic, and does not contain latex. Before use, be sure to shake the container well. It also comes with a stainless steel mixing ball to ensure even distribution of the paint.  Contains 8x 17ml. 1 x Hellfire Red 1 x Dwarven Flesh 1 x Bestial Brown 1 x Ivory Tusk 1 x Rocket Green 1 x Quicksilver 1 x Elder Bronze 1 x El Dorado

Read more less

Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.  Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion. They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes. For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints. Fiber Size: 12 mm high  Length: 6 cm Sheet size: 7x14 cm Content: 12

Read more less

Hobby sand is an indispensable material on any modeler's table or workshop as it is ideal for building realistic terrain in dioramas, decorating miniature bases for wargames, and many other creative hobbies. Made of an easy-to-glue and paint material, it is also available in a wide range of colors and sizes, allowing you to choose the most suitable option for each project. When applied to the base or floor of a model, it imitates the natural textures and characteristics of real landscapes, providing a high level of detail and authenticity. It is recommended to apply with PVA glue, tuft glue, or cyanoacrylate glue. Contains: 200 ml (approximate weight 100gr) Size of grain: Approx. 2-5mmColor: NaturalContains: 200ml (approximate weight 100gr)

Read more less

Hobby Sand Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue. Size of grain: Approx. 1-3mmColour: FieldContains: 200ml Hobbyzand Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen. Korrelgrootte is 1-3mm (grof) Veldkleur Verpakking is pot met draaideksel Inhoud 200ml (ong 100gr)

Read more less

Dwarf Resin bits are compatible with games such as Warhammer: The Old World and any dwarf army. This set of resin products created by Green Stuff World has been specially designed to be compatible with games such as Warhammer: The Old World and more specifically the dwarf army. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures, and accessories with exceptional detail, enhancing your gaming experience. Bring a realistic touch to your bases, dioramas, and figures using these high-quality, ABS-like plastic bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales. Selecting the right model glue and modeling tools is essential to assembling your Warhammer bits effectively and achieving optimum results. Understanding the project requirements, exploring the available options, and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice, and considering long-term maintenance are crucial to making informed decisions. These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale). Each set includes 20x Dwarf Pistols

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Ivy Foliage vegetation sheets from Green Stuff World are specialized sheets with leaves of different types, colors, and sizes designed to replicate the appearance of vine leaves and the leafiness of a tree on a miniature scale.  At Green Stuff World, we offer a wide selection of miniature basing materials, hobby leaves, vegetation, and many other types of paper plants for you to choose from to suit your project. With our variety of products, you can create scenes, figure and miniature bases, and dioramas quickly and easily, taking realism to a new level. Don't wait any longer and dive into the world of possibilities that our miniature branch and leaf mats have to offer. Add a touch of nature to your creations with Green Stuff World. Application and assembly:  If you are going to dress a wall of a building with miniature vines it is much more convenient to use a cyanoacrylate glue and go gluing some of the branches to the surface.  If you are going to make a miniature tree, it is advisable to use PVA glue or Tuft Glue. As there are many qualities of white glue and it is much easier to loosen the weeds from them, we strongly recommend using Tuft Glue for these functions so that it has a long-term hold. Recommended Scale: 1:72 - 1:87Leaf Type: MapleColor: Dry BrownContent: 1x Realistic Ivy Foliage in 140x70mm

Read more less

Hollow Plastic Bases -TRANSPARENT Top-quality plastic bases for mounting wargame figures. These bases allow you to place your model in multiple directions to create infinite possibilities and movements. Shape: Square  Thickness: 3mm Color: Transparent Bases: 10 per pack

Read more less

Martian Fluor Grass Green Stuff World's Martian Fluor Grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The Martian Fluor Grass is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml #static #grass #flock #greenstuffworld #200ml #Neo #titan #orange

Read more less

A 3D-printed set designed for modeling and wargames can be an excellent addition to your hobby toolkit. They offer the opportunity to create custom and intricately detailed terrain pieces, DnD miniatures, and Warhammer Skaven accessories, elevating your gaming experience. Adding these high-quality ABS-like resin bitz to your bases, dioramas, and figures can bring a realistic touch to your creations. Carefully crafted to mimic real species, these bits come in various shapes and sizes, catering to a wide range of needs and scales. Whether you're a model enthusiast or a tabletop gamer, these 3D-printed bits provide versatility and creativity to enhance your hobby projects. This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures. Content: 31x #resin #3d #printed #flaming #arrows #greenstuffworld

Read more less

Acrylic texture for soil and earth effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity. This paste is thick and has a dense consistency, suitable for representing mud textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 pot of 250ml textured paste Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken. #earth #series #textured #paste #greenstuffworld

Read more less

Elevate your dioramas to an unparalleled level of realism with our acrylic molds for modeling regular bricks. These accessories will allow you to create an infinite number of them with precision and consistency, adding authenticity and depth to your creations. They are specifically designed to create miniature regular bricks for use in scale modeling projects. Each model features a variety of patterns and textures that replicate real ones and that modelers will use to shape the air-drying clay. Our acrylic modeling molds are perfectly complemented by air-drying pastes such as modeling clay, foam clay, and similar products. These options guarantee a faithful and detailed reproduction for your diorama. Instructions for use: Using acrylic brick molds is a straightforward process, but it requires some care to ensure you get the best results. Here's a step-by-step guide on how to use these molds: Prepare the mold: Ensure that your acrylic brick mold is clean and dry. Make sure it's free of any debris or dust. Cover one side of the mold to hold the pieces. You can do this process with baking paper, wet oven paper, mylar plastic, or even airbrush masking tape. Place the mold on a flat surface: Find a flat and stable surface where you can work comfortably. Place the mold with the paper side down to prevent sticking. Add air-drying clay: Take a ball of air-drying clay and place it on the mold. Use your fingers to gently press and work the clay into the cavities of the mold. Make sure you fill each brick cavity completely. You may need to adjust the amount of clay to achieve your desired brick size and thickness. Level the surface: Use the included plastic spatula or the edge of another mold to drag/scrape across the surface of the mold, skimming off any excess clay. This will ensure that the surface is even and smooth. Let it dry: Allow the clay to dry completely. The air-drying paste has a small degree of shrinkage as it dries, which will help the pieces release from the mold. Remove the paper: Once the clay is completely dry, carefully peel off the paper tape from the back of the mold. This will help release the hobby bricks. Remove the pieces: Use a blunt stick (like the reverse end of a brush) to gently push out the individual bricks from the mold. Be careful not to apply too much pressure, as you don't want to damage the delicate acrylic mold. Smooth the edges: To give your bricks a more realistic look and get rid of any sharp edges, gently rub small amounts of them together between the palms of your hands. This will soften the edges and make the bricks look more like real bricks. Use the bricks: You can now use the air-dried clay bricks for your crafting or construction project. We recommend gluing the pieces with PVA glue or an acrylic sealer such as decoupe product (like ModPodge) to secure the pieces. Remember to handle the acrylic mold with care, as it's not as flexible as rubber or silicon molds and can break if bent.  With our methacrylate molds, your dioramas will come to life with authentic and captivating details - unleash your creativity and build sets that tell stories of their own! Take your projects to the next level of excellence with this essential accessory for lovers of high-quality dioramas. Quantity: 2x pack Scale: 1:35 (1:48-1:32) The thickness of the pieces: 3 mm Brick size: 2.85 x 5.7 mm Mould size: 6 x 11 cm

Read more less

Volcanic Earth Effect Texture Acrylic Paste 30ml by Green Stuff World, is an exceptionally versatile product that has become a must-have for modelers, hobbyists, and creative craft enthusiasts. This textured acrylic paint has gained popularity thanks to its ability to transform your bases for miniatures, dioramas, and a wide range of art projects into true masterpieces of realism. With its rich Volcanic shade, this texturing paste allows you to perfectly recreate the appearance of earth textures on diorama bases, scenes, or vignettes. High-quality formula and dense consistency allow you to apply it with precision, modeling terrains ranging from arid deserts to lush rural landscapes. The versatility of this textured paints is further highlighted by its ability to adhere firmly to a variety of surfaces, such as plastic, resin, wood, and more. This makes it an ideal choice for customizing and bringing life to your miniatures, models, and dioramas. It allows you to texturize and color a surface with a single application in the desired thickness. It dries quickly, which speeds up the work process and allows you to move forward with your project efficiently.  Whether you are creating an epic battle scene, a tranquil rural landscape or detailed scenery for your miniatures, this texturing paste is the perfect tool to add that touch of authenticity that will make your projects stand out. Discover the world of creative possibilities that Green Stuff World Volcanic Earth Effect Texturing Paste offers you and elevate your crafts and creations to an impressive level of realism. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 bottle of 30ml textured paste #earth #series #textured #paste #greenstuffworld

Read more less

Terracotta Earth Effect Texture Acrylic Paste 30 ml by Green Stuff World, is an exceptionally versatile product that has become a must-have for modelers, hobbyists, and creative craft enthusiasts. This textured acrylic paint has gained popularity thanks to its ability to transform your bases for miniatures, dioramas, and a wide range of art projects into true masterpieces of realism. With its rich reddish terracotta shade, this texturing paste allows you to perfectly recreate the appearance of earth textures on diorama bases, scenes, or vignettes. High-quality formula and dense consistency allow you to apply it with precision, modeling terrains ranging from arid deserts to lush rural landscapes. The versatility of this textured paints is further highlighted by its ability to adhere firmly to a variety of surfaces, such as plastic, resin, wood, and more. This makes it an ideal choice for customizing and bringing life to your miniatures, models, and dioramas. It allows you to texturize and color a surface with a single application in the desired thickness. It dries quickly, which speeds up the work process and allows you to move forward with your project efficiently.  Whether you are creating an epic battle scene, a tranquil rural landscape or detailed scenery for your miniatures, this texturing paste is the perfect tool to add that touch of authenticity that will make your projects stand out. Discover the world of creative possibilities that Green Stuff World Terracotta Earth Effect Texturing Paste offers you and elevate your crafts and creations to an impressive level of realism. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 bottle of 30ml textured paste #earth #series #textured #paste #greenstuffworld

Read more less

Range of extra opaque acrylic colors, including white opaque for model making and handicrafts. This range is a specially developed line of paints designed for hobby modeling and miniature painting including 24 unsaturated opaque colors in pigmentation but with a high coverage capacity. They are not transparent or see-through and when applied to a surface, they cover what's underneath, hiding any previous layers or simply using fewer coats, most of the time just one coat. They are thicker and have a high pigment concentration, which makes them excellent for achieving solid and vibrant color coverage. They are commonly used in crafts, and hobbies like model painting, to create rich and creative finishes. Use them as a base paint to start your projects, or in those places where high coverage is necessary. Complement them with other model paints or inks to add saturation and color intensity. Dilute it with water or acrylic thinner to be able to use it with an airbrush. This range is sold in dropper bottles with a metal agitator ball that will allow you a quick mixing. This type of dropper bottle, with the help of its nozzle, will also extend a lot of its shelf life by practically isolating contact with air. Content: 1x 17ml

Read more less

Hobby Micro Rivets - Conical In the realm of modeling and miniatures, Hobby Micro Rivets and miniature metal fasteners play a vital role in simulating the appearance of connections and joints. These small raised elements, commonly found on a variety of objects like AFVs, civilian vehicles, aircraft, and structures, enhance the level of detail and realism in models. By replicating the look of actually fastened joints, Hobby Micro Rivets bring authenticity to models, and their representation can vary depending on scale, materials used, and the modeler's personal preferences. Hobby Micro Rivets are particularly popular for converting Gunpla, Gundams, and futuristic robots, as they add intricate details to these imaginative creations. Notably, even in the Warhammer 40,000 universe, Orks have recognized the value of a tiny metal rivet in their construction projects. The Orks rely on their unique technological abilities driven by the "Waaagh!" energy, a belief system where collective faith in something's efficacy makes it work. This enables the Orks to create functional machinery and structures despite their primitive designs. The use of these miniature fasteners aligns with the Orks' construction approach, as they often repurpose salvaged materials, resulting in rugged-looking structures. Adding an extra layer of stability and reinforcement, these bolts fortify the joints, allowing Ork structures to endure the violent demands of warfare. The application of a rivet in modeling and miniatures encompasses several purposes: Visual intricacy: They visually represent the bolts found in real-life objects, enhancing the model's complexity and realism. Authenticity: Their inclusion contributes to a more accurate representation of the subject being modeled. You can create your own rivets and nuts with our silicone mould with any kind of putties and resins. For hobbyists seeking to enhance their projects, a set of 3D-printed slotted hexagon miniature fasteners, including various shapes and sizes, is now available. Crafted with precision using high-quality resin, these elements allow modelers to add intricate details to their kits, bringing them to life. Each set of rivets offers over 130 meticulously crafted bolts, enabling modelers to add precise and refined embellishments to their creations. With these hobby micro bolts at hand, you can elevate your modeling experience, immersing yourself in the art of miniature construction. This product comes unpainted and is ideal for 25-28-35 mm miniatures (1:76, 1:48, 1:35). This is a 3D-Printed Set that contains more than 130x #resin #3d #printed #conical #rivets #small #greenstuffworld

Read more less

Deze ink heeft veel pigment en is een verf met zowel aquarel als acrylverf functies. Normaal moet je acryl verf verdunnen om goed te vloeien, deze verf vloeit in plooien, kieren, kleine gaatjes, en andere reliefpunten. Hierdoor krijg je diepte zonder veel werk. Zeer heldere kleuren door de hoge graad aan pigment, duidelijke dekking. Met een kwast of airbrush aanbrengen. De verf droogt dekkend op (dus niet als een wash ink als aquarelverf) op oppervlakten maar gaat zich vooral hechten in groeven, hoeken, diepte, gaatjes, oneffenheden etc. Een bijzondere goede kwaliteit verf. Elk flesje heeft 17ml inhoud. Verdund of onverdund gebruiken op allerlei soorten ondergrond. Eventueel bij teveel verdund gebruik kan er nog een laag aangebracht worden. Droogt mat op. Kan gemengd worden met andere acrylverf.

Read more less

Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld

Read more less

Acrylic Color Acrylic paints with an opaque and smooth matt finish, especially designed for modelling and miniature painting. Formula curated and carefully developed by experienced artists using a new generation of pigments, the Acrylic Color range aims to provide a full spectrum of all basic tones and shades necessary for wargames, vehicles, miniatures and dioramas, as well as colours exclusive to GSW. Rich in high quality pigments, these colours will leave a fine homogenous layer of fast drying paint, respecting all details on the surface. Perfect for glazes and other techniques, making them adequate for experts and amateurs alike. Designed especially for brush painting, but Acrylic Color paints can be used with an airbrush when slightly diluted with acrylic thinner. Non-toxic water-based with no latex. Shake well before use. Includes stainless steel mixing ball. Contains: 17ml. *This Paint may contain a protective seal, remove before use. #acrylic #colours #greenstuffworld

Read more less