GreenStuffWorld

Siliconen mal Kelders - Dungeon Maak scenery op je eigen manier! Met deze siliconen mallen kun je eigenlijk onbeperkt diverse soorten kelders, muren, en andere ondergrondse scenery maken. Je kunt hiermee je eigen spelduur, flexibiliteit van verhaal en campagnes maken. Met deze 2 mallen kleder deuren, stenen bogen, puin en tegels met steen en houtdesign op een zodanige manier dat je eindeloos kan combineren. Oftewel het lijkt wel lego! In de Engelstalige instructies die erbij worden geleverd, wordt het uitgelegd en zal je snel je eerste resultaten kunnen maken. Welk bouwmateriaal? Tja alles wat je kunt gieten of zacht genoeg om in een mal te drukken. Denk daarbij aan acrylic resin (en waarom niet voorkleuren met pigment?), UV resin (met of zonder kleur voor de ramen), greenstuff, brownstuff, klei, gips, gietbeton of resin soorten. En voor de gekkigheid: deze mallen kunnen ook in de oven dus als je een taart of taartdecoratie maken voor de D&D fans...geen probleem! Schaal is 1/48. In de verpakking zitten 2 silicone mallen en instructievel. Silicone Moulds - Dungeon Revolutionary silicone molds with which you can build a dungeon of tiles of your own design. These molds have the ability to reproduce pieces infinitely, allowing your dungeons to be as large as you want. This adds a great level of flexibility with which you can edit, shorten or lengthen campaigns as you wish. The molds have been intricately detailed with barred and wooden dungeon doors, stone arches, piles of rubble, and tiles of different types to provide realism and beauty as well as practicality. All parts and their functions are carefully explained in the included instruction manual to assist you in your own designs. Compatible with acrylic resin, UV resins, polyurethane resin and epoxy resin. 1:48 scale (wargames) Contains: 2x Silicone Molds NOTE:In the case of using acrylic resin, to avoid that the finest pieces can split during the demoulding phase, it is recommended to increase the% of acrylic resin to 50/50.Also, we remember that in cold environments the minimum drying times of acrylic resin increase to 1-2 hours depending on the temperature. Drying times may be sped up in hot environments.

Read more less

Figuur roller met handvat straatRoller waarmee met gelijke druk een continu herhaald patroon op klei, plamuren, polymer klei, green of brown stuff en foam kan worden gedrukt. Hiermee kun je paden, straten, terrassen etc maken. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende patronen.Roller breedte: 4 cm (1.5 inches)Roller Lengte met greep: 14cm (5.5 inches)Diameter: 2'5cm (1 inch)Schaal: 54mm-Military (1/35-1/32) GEBRUIK INSTRUCTIES1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een base, gebruik dan een MDF basis. Dit omdat je de klei, epoxy etc direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood. Wil je alleen een prachtig pad, veranda, straat of iets anders maken dan kun je dit natuurlijk op een platte plaat drogen in de oven. Wil je een pad maken op een XPS foam zorg dan voor een goede druk. Klei of epoxy is zacht materiaal waarin je het patroon zonder hard duwen zult zien. XPS foam heeft gewoon meer druk nodig. In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de deegrollen na gebruik goed te reinigen.Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de roller te verwijderen, indien nodig. #rolling #pin #handle #greenstuffworld

Read more less

Oxidizer 17ml Oxidizing agent which activates the natural oxidization process of metals generating porosities and natural rust. Brass photo etches will improve the grip of paints. Some natural rust could be toxic, it is recommended to varnish after oxidizing to seal the rust and avoid contact. This effect will rust the pure metal pigments from our range in a very natural way. Contents 1x 17ml Oxidizer *********** Oxidizer 17ml Oxidatiemiddel dat het natuurlijke oxidatieproces van metalen activeert, waardoor porositeit en natuurlijke roest ontstaan. Foto-etsen van messing verbeteren de grip van verf. Sommige natuurlijke roest kan giftig zijn, het wordt aanbevolen om na oxidatie met vernis te lakken om de roest af te dichten en contact te vermijden. Door dit effect roesten de pure metaalpigmenten uit ons assortiment op een heel natuurlijke manier. Inhoud 1x 17 ml oxidatiemiddel #metal #oxidizer #roest #greenstuffworld #oxidatie

Read more less

Figuur roller Vampire Roller voorzien van een basisfiguur waarmee een continu herhaald patroon op klei en plamuren kan worden gedrukt. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende texturen die u kunt kopen op basis van uw specifieke behoeften.Lengte: 14'50 cm (5'5 inches)Diameter: 2'5cm (1 inch) GEBRUIK INSTRUCTIES:1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een basis, gebruik dan een MDF basis. Dit omdat je de polymeerklei direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood, maar maak je geen zorgen dat het zal branden! In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller of de klei enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de rollen na gebruik goed te reinigen. U kunt deze rollers ook gebruiken op XPS of Styrodur foam. Gebruik dan ook de silicone ringen zodat je een flinke zelfde druk uit kan voeren om het patroon over te brengen. Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de roller te verwijderen, indien nodig. Om de veiligheid te garanderen, moeten kinderen nauwlettend worden gecontroleerd door een verantwoordelijke volwassene.

Read more less

Stalen mallen ovaal - 6 maten Gemaakt van hoogwaardig roestvrijstaal. Makkelijk in gebruik. Ideaal voor klei, epoxy, etc te snijden maar je kunt deze mallen ook prima voor voedsel gebruiken of als werkbasis. Een werkbasis is dat je deze mal gebruik om materialen bij elkaar te houden. Makkelijk als je wilt dat gelijmde materialen ook goed op de basis drogen. Ook geschikt voor voedsel.Roostvrijstaal Zeer geschikt in maatvoering voor alle wargaming and tabletop games. Bevat de volgende maten: 25mmx50mm 35mmx60mm 42mmx75mm 52mmx90mm 70mmx105mm 90mmx120mm

Read more less

Natuurlijke pigmenten voor modelleren zijn bij ons verkrijgbaar in verschillende kleuren. Deze pigmenten zijn breed toepasbaar in de miniatuurwereld. Zo kun je met pigmenten verweringseffecten aanbrengen, waaronder stof, roest, moddervegen, mosstukjes, grondverkleuring of bijv modder maken. Je kunt pigmenten direct gebruiken over het model, diorama, scenery, resin produkten of wargaming terrein met behulp van een pigment fixer of mud effect (acryl pasta) zodat ze prima gefixeerd worden. Deze pigmenten kunnen droog of nat worden aangebracht, afhankelijk van wat u wilt bereiken. Meng ze met elkaar en met onze Acrylic Pigment Fixer of met Mud Effect om ze nat aan te brengen. Als u besluit de pigmenten droog aan te brengen, kunt u ze later fixeren met Acrylic Pigment Fixer. Deze pigmenten zijn niet giftig, maar vermijd inademen van het stof door neus of mond (dus niet opsnuiven!). Inhoud: 1 flesje van 30ml.

Read more less

Met een kwast of airbrush aanbrengen. De verf droogt dekkend op (dus niet als een wash ink als aquarelverf) op oppervlakten maar gaat zich vooral hechten in groeven, hoeken, diepte, gaatjes, oneffenheden etc. Een bijzondere goede kwaliteit verf. Elk flesje heeft 17ml inhoud. Verdund of onverdund gebruiken op allerlei soorten ondergrond. Eventueel bij teveel verdund gebruik kan er nog een laag aangebracht worden. Droogt mat op. Kan gemengd worden met andere acrylverf kan over andere laag Intensity Ink worden aanbracht waardoor kleurverrijking ontstaat.

Read more less

Miniatuur blad pons Linde bladeren 3 grootte - PAARS DONKER (DARK PURPLE) Miniatuur bladpons perfect om miniatuurbladeren te maken die bruikbaar zijn met schalen 1:35, 1:43 en 1:48 (54 mm, 32 mm en 28 mm). U kunt verschillende soorten papier en andere materialen gebruiken. Deze pons maakt 3 soorten lindebladeren. U kunt verschillende soorten papier en andere materialen gebruiken. Deze pons maakt 3 soorten bladeren.We raden aan gedroogde bladeren in verschillende kleuren te gebruiken. Natuurlijke bladeren moeten worden behandeld om de kleuren te behouden. Er zijn veel technieken om dit te bereiken. Ze kunnen ook worden geverfd. INSTRUCTIES:1. Zoek naar gevallen natuurlijke bladeren in het park naast uw huis.2. Laat de bladeren in een boek drogen, om de kleuren te behouden.3. Pons de natuurlijke bladeren.4. Gebruik PVA-lijm om de bladeren aan uw diorama te bevestigen.Bladen kunnen worden geslepen door aluminiumfolie door te stansen of te worden gesmeerd door ponsen door waxpapier. Andere ponsen obv kleur en hun maten: PUNCH COLOR SCALE TYPE OF LEAF RED 1:48 1:43 1:35  4 different GREY 1:48 1:43 1:35  4 different DARK GREEN 1:30 1:22 1:16 Lime LIGHT GREEN 1:30 1:22 1:16 Oak LIGHT PURPLE 1:48 1:43 1:35  Oak DARK PURPLE 1:48 1:43 1:35  Lime LIGHT BLUE 1:65 1:48 1:43 Lime ORANGE 1:65 1:48 1:43 Oak MEDIUM GREEN 1:30 1:22 1:16 Maple MEDIUM BLUE 1:48 1:43 1:35  Maple MEDIUM PURPLE 1:80 1:76 1:65 1:48 Maple DARK GREY 1:76 1:48 1:43 1:35 1:30 1:22 Roof Tiles YELLOW 1:65 1:48 1:43 1:35 1:30 1:22 Special DARK BLUE 1:65 1:48 1:43 1:35 1:30 1:22 Special

Read more less

Well wouldn't you like a present on your birthday? Even in a miniature scene we've got plenty to celebrate. Or add a festive and Christmas touch to your winter scenarios with the gift boxes set. Decorate your taverns, raiding dioramas, or magical scenes. It includes a wide variety of gifts so you can let your imagination run wild. All the gift boxes, printed in high-quality resin, are wrapped and feature a decorative bow. Furthermore, they come in different shapes: square, rectangular, round, and heart-shaped. They fit perfectly into wargaming environments, as there are gifts wrapped in the shapes of weapons and dynamite, and even one of the boxes has mutated and is alive! It has terrifying teeth and a long, porous, pointed tongue. The print quality is excellent, allowing minuscule details to be differentiated, which will provide your projects with a realism hard to find elsewhere. They are designed for 1:48/1:35 scales, come unpainted, and have easy-to-remove printing supports. Contents of the gift boxes set: Each set includes 22 assorted unpainted gift boxes resin bits.

Read more less

Resin Manhole Covers Scenery set for your favorite wargame which could be a fantastic addition to the scenery and terrains of your tabletop games. It is made with 3D printing technology for high-quality, realistic details that enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:48 - 1:35 miniatures. Scale: 1:48 - 1:35Content: 28x 

Read more less

Miniatures Carry Case Size Small Army Transport Bag has been specifically designed to protect your armies while in transit. Made of lightweight, hard-wearing, and padded Oxford fabric for long-term durability will allow you to carry more than 54 miniatures sound and safe and distributed among its 2 levels. It includes a reinforced MDF Cabinet to guarantee a resistant structure, 1 removable metalized tray, one long restraint strap and one top handle for comfortable handling, and finally 4 adjustable heights to place the trays with your minis. If you want to gain a few extra centimeters of inner space, you could remove the first lower MDF tray, and glue the metalized rubber directly to the base of the cabinet. To make this modification, simply cut with scissors the rubber so that it can fit. By doing so, the lower level will no longer be removable. Size: 30x15x18cm. Total weight 1.4kg. Assembly instructions inside. Includes: 1x Miniatures Carry Case - Army Transport Bag 1x Complete cabinet 1x Trays +1x adhesive metallized rubber sheet  Warning: This carrying case must protect your wargame armies, so it is absolutely necessary to reinforce the assembly with PVA glue. Army Transport Bag Accessories It can be combined with 3 accessories. Additional removable tray Additional cabinet to be able to organize all your armies.  * These accessories are sold separately.

Read more less

Extra Cabinet - Medium Extra Cabinet is designed to complement the transport and storage of miniatures. It can be used both as an additional cabinet for the GSW Army Transport Bag and as a free-standing stackable storage system. Manufactured of MDF wood is capable of accommodating more than 200 miniatures distributed among its rack levels. Storage modules with removable and configurable trays. These modules are designed to be stacked on top of one another, allowing for a customizable and space-efficient storage solution. Their property of being stackable between them will allow them to stack, for example, 1 medium module + 1 small module which equals 1 large module. It includes 4 removable metalized trays and its height is adjustable up to 11 levels to place the trays with your miniatures. If you want to gain a few extra centimeters of inner space, you could remove the first lower MDF tray, and glue the metalized rubber directly to the base of the case. To make this modification, simply cut with scissors the rubber so that it can fit. By doing so, the lower level will no longer be removable. Size: 7x11,8x11,8 in. (18x30x30cm). Total weights 2,3kg. Assembly instructions inside. Includes: - 1x Complete cabinet - 4x Trays + 4x adhesive metallized rubber sheets

Read more less

Smoke and stun grenades for miniatures, dioramas, or scale models made of quality resin and with a high level of detail. Ideal for war scenarios and battles. These are tactical tools used in military and civilian environments for various purposes. Among the most common is the marking of a specific point on the ground, indicating a landing zone or serving as a signal for other team members. On the other hand, the stun function is perfect for crowd control and self-defense. These resin bits allow you to customize troops to highlight their tactical role on the battlefield or reinforce the story behind a particular army. They can also be part of a scene of chaos and action, scattered on the ground or held by a character. The smokescreen also hides movements from enemy troops or hinders their visibility by disorienting them, in general. In addition, they are compatible with the recent updates of the Kill Team game rules, where they will be able to represent new functions, specifically the movement of throwing one of these grenades to make your games more realistic. It contains several different models of smoke and stun grenades so you can give your characters and their scenes the intensity you need at all times. Of course, you can also use them to set other games within the Warhammer 40k universe. This product comes unpainted and is compatible with a 1:48 scale. Contents: X12 Smoke and stun grenades

Read more less

What is a Glue Gun? The GSW Hot Glue Gun is an incredibly versatile and efficient hobby tool, specially designed to meet the needs of crafters, DIY enthusiasts, and professionals alike. This powerful device offers precision in bonding and fastening various materials such as fabric, plasticard, wood, ceramics, metal, foams, cork, and more, quickly and securely. Ideal for craft and repair projects, it ensures seamless operation with a lightweight, ergonomic design that minimizes user fatigue while maximizing productivity. It’s compatible with 11mm glue Sticks for glue gun and offers adjustable power settings ranging from 120W to 150W. With the ability to reach temperatures between 100°C to 220°C, this tool can be adapted to a wide range of materials, making it highly versatile. The GSW model also includes a fast-heating system, ensuring that it is ready for use in just minutes. Whether you're working on small crafts or complex repairs, it will help you get the job done efficiently and precisely. A glue gun is a tool that uses heat to melt a cylindrical adhesive stick, which then flows out in liquid form. The melted adhesive bonds different surfaces and materials quickly and securely as it cools and hardens. These tools are commonly used in a variety of applications, including arts and crafts, DIY repairs, packaging, and even professional construction projects. The adhesive can stick to a wide range of materials such as wood, plastic, metal, fabric, ceramics, and more. It is ideal for any project that requires fast and effective joining of materials. With an adjustable temperature setting, the GSW model can handle delicate as well as sturdy materials, making it one of the most versatile tools available for both beginners and experts. How to Use a Hot Melt Gun? Using a hot melt gun is straightforward, but there are a few important steps to ensure safety and the best results. Here’s a step-by-step guide: Preparation: Make sure the device is unplugged before you begin. Insert an 11mm adhesive stick into the slot located at the back of the device. Ensure that it is seated properly. Place the device on its stand so it remains stable while heating. Power and Heating: Plug the device into a power source and switch it on. If your model has an adjustable power setting, choose the appropriate one based on your project. Lower temperatures are better for delicate materials like paper or fabric, while higher temperatures work well for tougher materials such as wood and metal. Wait for a few minutes (usually around 3 to 5) for the device to heat up. Most models have a small indicator light to show when they are ready for use. Application: Once it’s heated, gently squeeze the trigger to release the melted adhesive onto the surface of your project. You can apply it directly to the material or in small dots depending on how much you need. Move the device slowly and steadily to ensure even distribution of the adhesive. For larger or heavier projects, apply more adhesive to ensure a secure bond. Bonding the Materials: Once the adhesive is applied, press the materials together firmly. The adhesive cools quickly, so you’ll have to act fast. Hold the materials in place for a few seconds to ensure a strong bond. If needed, you can use clamps or weights to hold the materials until the adhesive fully hardens. Resting the Device: After applying the adhesive, always rest the tool on its stand to avoid spills or accidental burns. If you are done using it, make sure to unplug it and allow it to cool down completely before storing it. What is the best hot glue gun? When it comes to choosing the best hot melt applicator, the Green Stuff World (GSW) Hot Glue Gun stands out as a top contender due to its innovative features designed for both safety and efficiency. This tool is highly regarded not only for its powerful bonding capabilities but also for the attention to detail in its design, which ensures ease of use, precision, and safety. Key Features that Make the GSW Hot Glue Gun the Best Choice: Brass Nozzle for Backflow Prevention One of the standout features of the GSW model is its brass nozzle, which is specifically designed to prevent backflow. This is a crucial innovation for anyone who has experienced the frustration of melted adhesive leaking or oozing out of a tool uncontrollably. The brass material is highly durable and heat-resistant, ensuring that the adhesive flows smoothly while preventing any messy backflow, even during extended use. This feature significantly enhances the precision and cleanliness of the tool, making it perfect for delicate crafting projects or precise repairs. Safety Stand Support Safety is a top priority when working with a tool that involves high temperatures, and the GSW applicator addresses this concern with its safety stand support. This sturdy stand allows you to rest the device securely between uses, minimizing the risk of accidental burns or damage to your workspace. The stand keeps the heated nozzle elevated, preventing it from coming into contact with surfaces, which could cause potential hazards. It’s an essential feature for maintaining a safe working environment, especially in busy workshops or home studios. Ergonomic Trigger for Comfort Another reason the GSW model is highly recommended is its ergonomic trigger. Unlike standard models that may cause hand fatigue during extended use, this applicator has a trigger designed to fit comfortably in your hand. This reduces strain, allowing you to work for longer periods without discomfort. The ergonomic design makes the GSW model a great option for professionals who use this tool for hours at a time, as well as for hobbyists who want a comfortable, user-friendly experience. Adjustable Temperature for Versatility The adjustable temperature control is a feature that sets the GSW applicator apart from many others on the market. With the ability to adjust the temperature from 100°C to 220°C, this model allows you to tailor the heat output depending on the material you’re working with. Lower temperatures are ideal for delicate projects involving materials like fabric, foam, or lightweight plastics, while higher temperatures provide the necessary heat for tougher materials like wood, metal, or ceramics. This versatility makes the GSW model suitable for a wide range of applications, from crafting and DIY repairs to more robust construction tasks. Consistent Performance and Fast Heating In addition to these specialized features, the GSW model offers consistent performance thanks to its high-power output of 120W to 150W. It heats up quickly, meaning you can get started on your projects in just a few minutes. The fast heating system ensures that you won’t waste time waiting for the tool to reach its optimal temperature, making it an efficient choice for both small and large projects. if you're looking for the best hot melt applicator on the market, the Green Stuff World Hot Glue Gun is a top-tier option. Its advanced features ensure not only high-quality results but also enhance the overall user experience, making your crafting, DIY, or repair projects smoother and more enjoyable. How to remove hot gun glue​? Removing hardened adhesive may seem tricky, but it can be done with the right approach. Here’s how to safely remove it: From Non-Porous Surfaces: For materials like glass, metal, or ceramics, you can usually peel off the adhesive once it has fully hardened. If it doesn’t come off easily, try applying rubbing alcohol or acetone to soften it before peeling. Be careful not to scratch the surface as you remove the adhesive. From Fabric or Other Delicate Materials: If adhesive gets on the fabric, wait for it to harden, then place the fabric in the freezer for about 30 minutes. The cold will harden the adhesive further, making it easier to peel off. For more stubborn spots, you can try using an iron. Place a piece of wax paper over the adhesive and run the iron over it on a low setting. The heat will soften the adhesive, and it will stick to the wax paper, pulling it away from the fabric. Using Heat: In some cases, you can reheat the adhesive using the same device you used to apply it. Hold the device a few inches away from the hardened adhesive to soften it, then scrape it off carefully with a blunt object like a butter knife or spatula. Just make sure the material you're working with can withstand the heat. Specialized Removal Tools: There are also adhesive removal tools available, which can help scrape away the adhesive without damaging the underlying surface. How to treat a hot glue gun burn​? Burns are a potential hazard when working with a high-temperature device like this, so it’s important to know how to treat them. Here’s what you should do if you accidentally burn yourself: Immediate Cooling: The first thing to do when you get burned is to cool the area immediately. Run cold water over the affected area for 10 to 15 minutes. Avoid using ice directly on the burn, as it can cause additional damage to the skin. If the adhesive is still on your skin, do not attempt to peel it off right away. Continue to flush the area with cold water until the adhesive solidifies, and then gently peel it off. Avoiding Further Damage: After the burn has cooled down, avoid touching or applying pressure to the area, as this can cause further damage. If the burn is severe or involves blistering, seek medical attention. Using Burn Cream: For minor burns, applying a burn cream or ointment can help soothe the area and promote healing. Aloe vera is also an excellent natural remedy for burns. It reduces pain and helps the skin recover more quickly. Protecting the Burn: After treating the burn, cover the area with a sterile bandage or dressing. This will help prevent infection and keep the burn clean. Change the dressing regularly, and keep an eye on the wound for any signs of infection such as increased redness, swelling, or pus. Seeking Medical Attention: If the burn is large, severe, or located on sensitive areas like the face, hands, or joints, it’s important to seek medical attention right away. Safety Considerations When using any tool that involves heat, safety is of the utmost importance. The GSW model includes several built-in safety features such as automatic temperature control to prevent overheating. However, it’s still essential to take precautions: Always Rest on the Stand: When not actively using the tool, always rest it on its stand to prevent accidental burns or spills. Unplug When Not in Use: After completing your project, be sure to unplug the device and allow it to cool down before storing it. Work in a Well-Ventilated Area: While most adhesive sticks are non-toxic, it’s still a good idea to work in a well-ventilated area to avoid inhaling any fumes. Keep Out of Reach of Children: Ensure that this tool is kept away from children and pets to prevent accidental burns or injuries.

Read more less

Heat gun 450w A Hot Air Gun, also referred to as a Heat Gun, is a highly versatile hobby tool designed to blow heated air at controlled temperatures. It is widely used in various fields, including crafts, cosplay, and industrial settings, due to its ability to apply heat precisely to a wide range of materials.  The core structure of a Hot Air Gun includes a nozzle, a heating element, and an internal fan. The fan propels air across the heating element, which then exits the nozzle as a stream of hot air gets directly to specific areas with considerable accuracy. In crafting, this tool is indispensable. It is frequently utilized for shrinking plastic films or tubing applied to wires or other objects, which then contract tightly around them with the application of warmth. This method is common in electrical work, where shrink tubing is used to insulate and protect wires. Additionally, this tool can be used to dry paints, glues, and other adhesives more rapidly than would be possible with air drying alone. This function is particularly useful in craft projects where time is a factor or when multiple layers of material need to be dried quickly. In paper crafting, thermal tools are often employed for embossing, a technique where warmth is applied to embossing powder to create raised, textured designs on paper. This application is popular in making greeting cards, invitations, and other decorative items. In the realm of cosplay, they are equally essential. Cosplayers frequently work with materials like Worbla and EVA foam, both of which are thermoplastics that can be shaped when heated. A Hot Air Gun allows cosplayers to warm these materials until they become pliable, enabling them to mold and shape the material into intricate costume pieces, armor, and props. The ability to control its temperature is crucial in these applications, as overheating can cause damage to the materials, while insufficient warmth may not soften them adequately. They are also used in cosplay to cure paints more quickly. Once a costume or prop has been painted, applying warm can speed up the drying process, making it easier to apply additional layers or move on to other stages of the project. This is particularly helpful in situations where multiple coats of paint are necessary to achieve the desired effect. Another important use of thermal tools in cosplay is for activating heat-sensitive adhesives. Some adhesives are designed to bond more effectively when exposed to warmth, and this tool provides the precise level of warmth needed to activate these adhesives without causing damage to the surrounding materials. This precision is crucial in creating high-quality cosplay pieces, where the durability and appearance of the final product are of utmost importance. This tool offers two-speed settings, allowing selection between two specific temperatures: 280ºC and 450ºC. This allows users to choose the ideal power level for their specific task, which is crucial, as different materials require different temperatures to achieve the desired effect.  In addition, each mode features variable airflow settings, allowing control over the rate at which the high temperature is expelled: 150L/m or 200L/m. This feature is especially useful for directing heat more precisely or dispersing it over a wider area, depending on the needs of the project. Features: Overheat protection: The power of this heat gun will automatically cut off after 15 minutes of overheating. Built-in stand: It can be self-support and tabletop use, simple, and safe. Long Cable: A 2 m long cable helps you to use this thermal gun in large areas more conveniently. There are two powers: Mode I 280ºC (536ºF), 150L/m · Mode II 450ºC (842ºF), 200L/m. Quick temperature dissipation: Multiple vents can speed up dissipation. Ergonomic design: The shape and non-slip design make the heat gun comfortable to hold in hand. Versatile application: Wide use and perfect for DIY projects. EU plug Content: 1x Hot air machine (2 meters of cable)1x Metal instrument for heating parallel parts

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x50mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Avatar World Set With this selection of materials and model paints you can replicate the effects of alien environments with extravagant Martian plants and strident colors. The different pigments, textures, alien plants, fluorescent Martian vegetation, and hyper-realistic crystals included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Purple 30ml Martian Textures - Fluor Blue 30ml Fluor Pigments - Light Orange 30ml Dry Brush Paint - Ultramarine touch 30ml Dry Brush Paint - Dry Violet 30ml Martian Tufts 6mm - Neon Yeti Blue Martian Tufts 6mm - Neo-Titan Orange Martian Fluor Grass - Wildfire Green Basing Bark Chips Islandmoss - Fuchsia Islandmoss - Grey Resin pieces

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Laser Plants - Ground Palm GSW's array of realistic laser cut paper plants for making forest, jungle, swamp, or beach vegetation easily and effectively. Easy to assemble and to paint.  Instructions Carefully separate from the frame. It is recommended to use an airbrush to paint them but they can also be painted carefully by brush. Avoid using too much paint to not excessively dampen the material. Leave to dry completely before assembling. Assembly can be done using PVA glue or any type of glue, but it is especially recommended to use cyanoacrylate glue. Using varnish after painting adds resistance to plants. Contents 1 Sheet of 9.5x14.5cmQuantity of Leaves: 14 ground palm leaves Scale 1/48 - 1/35 - 1/32

Read more less

Acrylic Ink tranparant GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects. These inks offer exceptional versatility, allowing the creation of highly concentrated and intense colors when applied undiluted. Their high-quality pigmentation ensures that the colors maintain their vividness and strength. On the other hand, by diluting the inks, rich color transparencies are achieved that add depth and subtlety to compositions. This ability of acrylic ink to adapt to different techniques and artistic styles makes it a preferred choice for a wide variety of creative projects. The product comes in a glass bottle with a dispensing pipette, which allows you to precisely contour each drop of pigment to control the amount and intensity of the mixtures you work with, giving you the freedom to bring your visions to life with unparalleled clarity and precision. With acrylic inks, you can create everything from color filters to powerful effects of depth and luminosity. Their transparency allows you to play with light and color in a subtle and sophisticated way, creating works that captivate the eye and awaken the imagination. Main characteristics: Extremely pigmented. Matte finishes Vivid, fluid, and intense colors. It is not necessary to dilute it to use it with an airbrush or in calligraphy. Strong resistance to light. Compatible with all other GSW acrylic products and mediums. Wide range of opaque and transparent colors to meet various creative needs. Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PY110/PR122Finish: matteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Semi-transparent

Read more less

Acrylic Ink tranparant GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects. These inks offer exceptional versatility, allowing the creation of highly concentrated and intense colors when applied undiluted. Their high-quality pigmentation ensures that the colors maintain their vividness and strength. On the other hand, by diluting the inks, rich color transparencies are achieved that add depth and subtlety to compositions. This ability of acrylic ink to adapt to different techniques and artistic styles makes it a preferred choice for a wide variety of creative projects. The product comes in a glass bottle with a dispensing pipette, which allows you to precisely contour each drop of pigment to control the amount and intensity of the mixtures you work with, giving you the freedom to bring your visions to life with unparalleled clarity and precision. With acrylic inks, you can create everything from color filters to powerful effects of depth and luminosity. Their transparency allows you to play with light and color in a subtle and sophisticated way, creating works that captivate the eye and awaken the imagination. Main characteristics: Extremely pigmented. Matte finishes Vivid, fluid, and intense colors. It is not necessary to dilute it to use it with an airbrush or in calligraphy. Strong resistance to light. Compatible with all other GSW acrylic products and mediums. Wide range of opaque and transparent colors to meet various creative needs. Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PY110/PR122Finish: matteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Semi-transparent

Read more less

Acrylic Ink tranparant GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects. These inks offer exceptional versatility, allowing the creation of highly concentrated and intense colors when applied undiluted. Their high-quality pigmentation ensures that the colors maintain their vividness and strength. On the other hand, by diluting the inks, rich color transparencies are achieved that add depth and subtlety to compositions. This ability of acrylic ink to adapt to different techniques and artistic styles makes it a preferred choice for a wide variety of creative projects. The product comes in a glass bottle with a dispensing pipette, which allows you to precisely contour each drop of pigment to control the amount and intensity of the mixtures you work with, giving you the freedom to bring your visions to life with unparalleled clarity and precision. With acrylic inks, you can create everything from color filters to powerful effects of depth and luminosity. Their transparency allows you to play with light and color in a subtle and sophisticated way, creating works that captivate the eye and awaken the imagination. Main characteristics: Extremely pigmented. Matte finishes Vivid, fluid, and intense colors. It is not necessary to dilute it to use it with an airbrush or in calligraphy. Strong resistance to light. Compatible with all other GSW acrylic products and mediums. Wide range of opaque and transparent colors to meet various creative needs. Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PY110/PR122Finish: matteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Semi-transparent

Read more less

Martian Fluor Grass Green Stuff World's Martian Fluor Grass is realistic and of high quality. Designed to decorate the bases of your miniatures or for scenography and terrain building. It is recommended to apply with white glue. The Martian Fluor Grass is packaged in closed plastic boxes of great capacity to facilitate their use. This amount will allow you to easily decorate one or more armies and create dozens of sets and bases. Content: 200 ml #static #grass #flock #greenstuffworld #200ml #sulley #purple #blue

Read more less

Acrylic texture for soil and earth effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity. This paste is thick and has a dense consistency, suitable for representing mud textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 pot of 250ml textured paste Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken. #earth #series #textured #paste #greenstuffworld

Read more less

Ivy Foliage vegetation sheets from Green Stuff World are specialized sheets with leaves of different types, colors, and sizes designed to replicate the appearance of vine leaves and the leafiness of a tree on a miniature scale.  At Green Stuff World, we offer a wide selection of miniature basing materials, hobby leaves, vegetation, and many other types of paper plants for you to choose from to suit your project. With our variety of products, you can create scenes, figure and miniature bases, and dioramas quickly and easily, taking realism to a new level. Don't wait any longer and dive into the world of possibilities that our miniature branch and leaf mats have to offer. Add a touch of nature to your creations with Green Stuff World. Application and assembly:  If you are going to dress a wall of a building with miniature vines it is much more convenient to use a cyanoacrylate glue and go gluing some of the branches to the surface.  If you are going to make a miniature tree, it is advisable to use PVA glue or Tuft Glue. As there are many qualities of white glue and it is much easier to loosen the weeds from them, we strongly recommend using Tuft Glue for these functions so that it has a long-term hold. Recommended Scale: 1:72 - 1:87Leaf Type: OakColor: Dark GreenContent: 1x Realistic Ivy Foliage in 140x70mm

Read more less

Acrylic texture for rust effects developed to create extreme realism. Texturizes and colors the surface, apply in layers of the desired thickness. It can be diluted with water or an acrylic thinner to modify its fluidity. This paste is thick and has a dense consistency, suitable for representing rust textures on diorama or vignette bases. It can be easily spread with a brush or spatula. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 bottle of 30ml textured paste Je kunt meerdere kleuren Textures met elkaar gebruiken in lagen. Dus laat een donkere variant met een dun laag drogen en breng hier een lichtere op aan. Ook kun je de pigmenten gebruiken om extra te kleuren of meng met Mud-Modder effect om je eigen texture paste te maken. #concrete #series #textured #paste #greenstuffworld

Read more less

Range of extra opaque acrylic colors, including white opaque for model making and handicrafts. This range is a specially developed line of paints designed for hobby modeling and miniature painting including 24 unsaturated opaque colors in pigmentation but with a high coverage capacity. They are not transparent or see-through and when applied to a surface, they cover what's underneath, hiding any previous layers or simply using fewer coats, most of the time just one coat. They are thicker and have a high pigment concentration, which makes them excellent for achieving solid and vibrant color coverage. They are commonly used in crafts, and hobbies like model painting, to create rich and creative finishes. Use them as a base paint to start your projects, or in those places where high coverage is necessary. Complement them with other model paints or inks to add saturation and color intensity. Dilute it with water or acrylic thinner to be able to use it with an airbrush. This range is sold in dropper bottles with a metal agitator ball that will allow you a quick mixing. This type of dropper bottle, with the help of its nozzle, will also extend a lot of its shelf life by practically isolating contact with air. Content: 1x 17ml

Read more less

Touch-up Toolset THE PERFECT TOOLS FOR CONVERTING YOUR MINIATURES. A starter set with which you can repair and convert your miniatures. The set contains 1 tape Green Putty (15 cm), 3 Metal Modelling Tools, 5 Silicone Brushes #0, 1 Liquid Green Putty and 2 sets of 20 flexible sandpaper pads. Ideal for beginners and hobbyists, modelers, and other wargames such as Warhammer, 40K, AOS, 9thAge, Star Wars Legion, and Dungeons & Dragons among others. #greenstuffworld #touch #up #tool #kit #set

Read more less

3D printed set - Cannabis A 3D-printed set of Cannabis plants made from high-quality ABS-like resin offers a unique addition to your dioramas and scenery. Crafted with careful attention to detail, these plants closely resemble real species of Cannabis, adding authenticity to your displays. With a variety of shapes and sizes available, these resin bits can cater to different needs and scales, making them versatile for various artistic projects. Whether you're creating a realistic outdoor scene or a themed diorama, these plants can enhance the overall visual appeal and storytelling of your creations. Their durability and lifelike appearance make them ideal for long-term use and enjoyment. As with all resin-based products, it's essential to handle and use them responsibly and in accordance with local laws and regulations. Choosing the appropriate modeling glue, modeling tools, or approach for a given task with your Warhammer bits is essential for achieving optimal results and efficiency in any project. Understanding the project's requirements, researching available options, and evaluating their performance and suitability are key factors. Additionally, considering the expertise and resources available, staying up-to-date with the latest developments, seeking advice from experts, and thinking about long-term maintenance are all crucial aspects of making an informed decision.  This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures. Contains: x17 pieces Warning: These pieces are very realistic models and have a purely decorative function, so they are not suitable for smoking. #resin #3d #printed #cannabis #leaves #greenstuffworld #vegetatie

Read more less

Futuristic silicone molds for modeling and wargaming will allow you to make thousands of unique pieces to decorate your game tables and the bases of your wargame miniatures. This food-grade silicone is known for its flexibility, durability, and ability to reproduce intricate details accurately. With these hobby molds, you can make multiple copies of the same design, which is especially useful for mass-producing game pieces or miniature models. These are ideal for creating complex shapes and patterns, and they will allow you thousands of unique pieces both to decorate your game tables and the bases of your wargame miniatures, from futuristic city ruins to fantasy buildings such as bunkers and space fortresses. They are flexible and durable, so you can use them to create the perfect scenery for your games. They are designed to be compatible and complementary with other pieces from the same range of hobby products from Green Stuff World, so you can create extremely detailed items. If you're interested in creating unique pieces for your tabletop tables or wargaming miniatures, this tool will be worth considering. Acrylic resin is highly recommended to fill them, as well as using scrapers for removing any resin or putty/clay excess without damaging them. This set consists of 3 molds 6x12cm full of pieces perfect for creating 1/48 scale scenery as well as for traditional and Warhammer wargames, among others. #mold #mal #sci #fi #futuristic #wargame #scenery #terrain #greenstuffworld

Read more less

Dipping ink 60 ml Dipping ink semi-transparent paints help you to shade your figures more quickly and easily over a single coat of paint. Apply with a brush over a layer of matt white or a light colour to easily achieve realistic shadows in a single application of Dipping. The Dipping ink range is the best speedpainting solution on the market to contrast your miniatures and gain more time for the game. It can also be used by advanced painters taking advantage of its unique properties to mark shadows and volumes, blend and veil colours with ease, bring out the details of your figure quickly and use it as a starting point for more professional painting. These paints have been designed in a 60ml pot so that you have enough product to paint entire armies with ease. Contents: 1x Dipping ink in 60ml Colour: Burgundy #speed #paint #burgundy #dip #dipping #ink #greenstuffworld

Read more less

Deze ink heeft veel pigment en is een verf met zowel aquarel als acrylverf functies. Normaal moet je acryl verf verdunnen om goed te vloeien, deze verf vloeit in plooien, kieren, kleine gaatjes, en andere reliefpunten. Hierdoor krijg je diepte zonder veel werk. Zeer heldere kleuren door de hoge graad aan pigment, duidelijke dekking. Met een kwast of airbrush aanbrengen. De verf droogt dekkend op (dus niet als een wash ink als aquarelverf) op oppervlakten maar gaat zich vooral hechten in groeven, hoeken, diepte, gaatjes, oneffenheden etc. Een bijzondere goede kwaliteit verf. Elk flesje heeft 17ml inhoud. Verdund of onverdund gebruiken op allerlei soorten ondergrond. Eventueel bij teveel verdund gebruik kan er nog een laag aangebracht worden. Droogt mat op. Kan gemengd worden met andere acrylverf kan over andere laag Intensity Ink worden aanbracht waardoor kleurverrijking ontstaat.

Read more less

Water effect Gel - 250ml Transparent acrylic gel specially designed to replicate moving water, waves, and splashes with a realistic finish. It is perfect to achieve a depth effect as well as a realistic watercolor which makes it ideal for naval dioramas or for scenery with smaller aquatic features such as river streams and puddles. Splash gel dries in 24 hours, although it could be more or less depending on the thickness of the application.The texture is thick enough to be poured onto all kinds of surfaces, even slopes. It is recommended to apply in thin layers, adding multiple layers if necessary. You can model the surface while it dries using old brushes, sculpting tools, or toothpicks to create water wave crests, waterfalls, and rough seas, among others. It can be diluted either with water or acrylic thinner to change the consistency and mix it with other products of the same range or small amounts of acrylic inks to slightly change the color. Content: 250ml #water #gel #effect #greenstuffworld #splash #250ml #turquoise

Read more less

Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #light #orange #fluor #pigment #greenstuffworld #30ml

Read more less

Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #orange #red #fluor #pigment #greenstuffworld #30ml

Read more less

Bright colored fluorescent pigments are able to glow under ultraviolet light, available in many varying colors for a wide variety of distinctive effects for your models. Apply these fluor pigments directly over any surface. We recommend mixing them with mediums, paints, varnish, or pigment fixers for them to stay permanently. These pigments are non-toxic, but you should avoid inhaling the dust. Contents: 1 bottle of 30ml. #dark #red #fluor #pigment #greenstuffworld #30ml

Read more less