New Arrivals

3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 54 mm (1:35) miniatures. Size: 18x32x16 mmScale: 1:35Content: 4x

Read more less

This set includes a selection of American grenades and mines in 1:35 scale, ideal for military models, historical dioramas, and scale modelling scenes. The included models feature American grenades MK2, MK3A2, M14, M15 White Phosphorus, M18, and the M9A1 rifle anti-tank grenade, as well as American mines M1, M6 and M7. This set is ideal for recreating military scenes, camps, supply posts, trenches, ammunition depots, transport vehicles, combat zones, or historical dioramas inspired by World War II and other modern conflicts. The grenades can be placed as additional cargo, stored ammunition, abandoned equipment, accessories for figures, or small narrative details that help add depth and realism to the scene. Made from high-quality 3D printer resin, these pieces offer optimal detail for demanding modeling projects. The set includes individual grenades of various sizes, two grenade boxes, and their corresponding lids, allowing you to create varied and realistic compositions both indoors and outdoors. They are supplied unpainted, ready to be customized with your own painting techniques, washes, drybrushing, pigments, and weathering effects. You can paint them as new grenades, used equipment, stored ammunition, or gear worn by mud, dust, rust, or moisture, easily adapting them to the type of model or diorama you are building. For a more professional result, combine these resin pieces with other diorama accessories, boxes, drums, sacks, vehicles, tools, and terrain elements to create more complete, believable, and detailed military scenes. This product comes unpainted and is perfect for 1:35 scale (54 mm). Contents: 50x (42 grenades + 6 boxes + grenade launchers)

Read more less

This set includes a selection of German grenades and mines in 1:35 scale, ideal for military models, historical dioramas, and scale modelling scenes. The included models feature German grenades M24, M39 and M43, as well as German mines Tellermine 29, Tellermine 35, Tellermine 42, and Tellermine 43. This set is ideal for recreating military scenes, camps, supply posts, trenches, ammunition depots, transport vehicles, combat zones, or historical dioramas inspired by World War II and other modern conflicts. The grenades can be placed as additional cargo, stored ammunition, abandoned equipment, accessories for figures, or small narrative details that help add depth and realism to the scene. Made from high-quality 3D printer resin, these pieces offer optimal detail for demanding modeling projects. The set includes individual grenades of various sizes, two grenade boxes, and their corresponding lids, allowing you to create varied and realistic compositions both indoors and outdoors. They are supplied unpainted, ready to be customized with your own painting techniques, washes, drybrushing, pigments, and weathering effects. You can paint them as new grenades, used equipment, stored ammunition, or gear worn by mud, dust, rust, or moisture, easily adapting them to the type of model or diorama you are building. For a more professional result, combine these resin pieces with other diorama accessories, boxes, drums, sacks, vehicles, tools, and terrain elements to create more complete, believable, and detailed military scenes. This product comes unpainted and is perfect for 1:35 scale (54 mm). Contents: 41x (35 grenades + 6 suitcases)

Read more less

Add realism, detail, and character to your models with GSW’s high-quality resin wooden barrels, designed to be compatible with 1:35 scale dioramas and miniature models. These barrels are ideal for decorating bases, dioramas, small scenes, and scenery tables, creating more immersive and natural atmospheres. You can use them as storage elements, supply barrels, cargo for carts or warehouses, or as decoration for taverns, cellars, docks, military camps, medieval markets, or rural settings, adding an extra touch of realism to your projects. Made of ABS-like resin for 3D printers, these elements faithfully reproduce the texture of wood, the reinforcement hoops, the grain, and the small details characteristic of traditional barrels. Their detailed design allows them to be easily integrated into storage, transport, trade, scenic decoration, or historical and fantasy settings. They are delivered unpainted, ready for you to customize with your own painting techniques, washes, drybrushing, and weathering effects. You can paint them as new wood, old barrels, damp casks, or containers for wine, beer, gunpowder, water, or provisions, easily adapting them to different eras and settings. Whether you’re creating a wine cellar, a medieval tavern, a commercial port, a military warehouse, a rural scene, a historical diorama, or a fantasy gaming table, these wooden barrels from GSW will provide the level of detail and realism your projects need. Dimensions: the tallest measures 26 mm in height x 15 mm in diameter. See the photo with the measurements in the thumbnail. This product comes unpainted and is perfect for 1:35 scale (54 mm). Contents: 7x resin wooden barrels.

Read more less

Add realism, detail, and character to your models with GSW’s high-quality resin metal barrels, designed to be compatible with 1:35 scale dioramas and miniature models. These barrels are ideal for decorating bases, dioramas, small scenes, and scenery tables, creating more immersive atmospheres. You can use them as makeshift cover, loot items, supply containers, or simple decorative details, adding extra drama and realism to your scenes. Made of ABS-like resin for 3D printers, these elements faithfully reproduce metallic textures, corrosion details, dents, and realistic damage, making them highly versatile pieces for discerning modelers. They are delivered unpainted, ready for you to customize with your own painting and weathering techniques. Whether you’re creating an abandoned factory, a futuristic battlefield, a ruined urban setting, or a post-apocalyptic diorama, these GSW metal barrels will provide the level of detail and realism your projects need. Dimensions: the tallest measures 24 mm in height x 15 mm in diameter.  This product comes unpainted and is perfect for 1:35 scale (54 mm). Contents: 9x

Read more less

Add realism, detail, and character to your models with GSW’s high-quality stackable wooden barrels made of resin, designed to be compatible with 1:35 scale dioramas and miniature models. These barrels are ideal for decorating bases, dioramas, small scenes, and scenery tables, creating more immersive and natural atmospheres. You can use them as storage elements, supply barrels, cargo for carts or warehouses, or as decoration for taverns, cellars, docks, military camps, medieval markets, or rural settings, adding an extra touch of realism to your projects. Made of ABS-like resin, these elements faithfully reproduce the texture of wood, the reinforcement hoops, the grain, the staves, and the small details characteristic of traditional barrels. Their stackable design allows them to be easily placed on top of one another, creating more dynamic and natural compositions in storage, transport, or scenic decoration scenes. They are delivered unpainted, ready for you to customize with your own painting techniques, washes, drybrushing, and weathering effects. You can paint them as new wood, old barrels, damp casks, or containers for wine, beer, gunpowder, water, or provisions, easily adapting them to different eras and settings. Whether you’re creating a wine cellar, a medieval tavern, a commercial port, a military warehouse, a rural scene, a historical diorama, or a fantasy gaming table, these stackable wooden barrels from GSW will add the level of detail and realism your projects need. Dimensions: the tallest measures 26 mm in height x 15 mm in diameter. See the photo with the measurements. This product comes unpainted and is perfect for 1:35 scale (54 mm). Contents: 5x stackable wooden barrels made of resin.

Read more less

1:35 Scale Resin Travel Suitcases for Models and DioramasThis set includes a selection of vintage travel suitcases in 1:35 scale, ideal for military models, historical dioramas, civilian scenes, train stations, transport vehicles, camps, command posts, refugees, evacuations, or scenes set during World War I and World War II. The suitcases feature a classic and realistic design, with shapes, closures, handles, and dimensions inspired by vintage period luggage. They are perfect accessories for adding small narrative details to your modeling projects, representing personal belongings, abandoned luggage, travel supplies, cargo transported in vehicles, or decorative elements in interiors and exteriors. Made of ABS-like resin for high-quality 3D printing, these parts offer high definition and durability, allowing for fine details and accurate proportions for demanding model-building projects. Their 1:35 scale makes them particularly suitable for military models, 54 mm figures, historical dioramas, and realistic scenes featuring vehicles, buildings, ruins, or scenery elements. This set is highly versatile and can be used in both wartime and civilian settings. It is ideal for recreating train stations, destroyed streets, military camps, evacuation zones, checkpoints, convoys, transport vehicles, shelters, warehouses, or scenes depicting displaced populations during historical conflicts. They are supplied unpainted, ready to be customized with your own painting techniques. You can paint them to look like weathered leather suitcases, fabric luggage, worn trunks, or suitcases covered in dust, mud, wear and tear, moisture, or signs of use. Applying washes, dry brushing, pigments, and weathering effects will help highlight the details and achieve a more realistic finish. To create more complete compositions, combine these resin suitcases with 1:35 scale figures, military vehicles, wooden crates, drums, sacks, tools, ruins, buildings, platforms, or camp accessories. They add visual depth to the scene and help tell a story within any model or diorama. This product comes unpainted and is perfect for 1:35 scale (54 mm). Contents: 9x

Read more less

1:35 Scale Resin Books for Models and DioramasThis set includes a selection of 1:35 scale books, ideal for models, historical dioramas, civilian scenes, building interiors, libraries, offices, schools, abandoned houses, ruins, command posts, camps, vehicles, warehouses, or model-making scenes set in any era. The books feature a high level of detail and realism, with different shapes, thicknesses, and sizes that allow you to create varied and natural compositions. They are perfect accessories for adding small narrative elements to your projects, representing stacked books, study materials, documentation, files, personal items, office supplies, or abandoned belongings within a scene. Made of ABS-like resin for high-quality 3D printing, these pieces offer excellent definition and durability, allowing you to reproduce fine details and accurate proportions for demanding model-making projects. Their 1:35 scale makes them especially suitable for military models, 54 mm figures, historical dioramas, urban scenes, realistic interiors, and detailed scenery projects. This set is highly versatile and can be used in scenes from any historical period or theme. They are ideal for recreating home interiors, desks, work tables, bookshelves, libraries, offices, classrooms, shelters, ruined buildings, military camps, communications posts, or civilian and military scenes with a high level of atmosphere. They are supplied unpainted, ready to be customized with your own painting techniques. You can paint them to look like old books, worn documents, school notebooks, office files, military manuals, dusty books, volumes worn by the passage of time, or items abandoned in a scene. Applying washes, dry brushing, pigments, and weathering effects will help highlight the details and achieve a more realistic finish. To create more complete compositions, combine these resin books with furniture, boxes, suitcases, tools, maps, figures, vehicles, buildings, ruins, bookshelves, or interior accessories. They add visual depth to the scene and help tell a story within any model or diorama. This product comes unpainted and is perfect for 1:35 scale (54 mm) Contents: 21x

Read more less

WTC container | Official WTC scenery compatible with competitive Warhammer 40k tournaments   GSW Plastic Armoured Containers (Pack x2)The Green Stuff World Plastic Armoured Containers are a versatile scenery kit designed to add tactical depth, visual interest, and practical cover to sci-fi, industrial, modern, and post-apocalyptic wargaming tables. This set includes two armoured containers made of injected plastic, supplied unassembled and unpainted, allowing hobbyists to build, customize, and paint them to match any battlefield setting. These containers are practical terrain pieces for players looking for scenery that is easy to assemble, simple to use and flexible on the tabletop. They are ideal for creating industrial outposts, military supply depots, spaceports, cargo zones, futuristic cities, fortified positions or grimdark sci-fi battlefields. Each container features a robust sci-fi design with reinforced panels, industrial details and a solid armoured appearance. Every container includes two swing doors, adding extra realism and making them perfect for representing cargo storage, supply crates, ammunition depots, military equipment or secured battlefield objectives. They also include a roof hatch, which can be assembled either open or closed, giving hobbyists more options when customizing the final look of each piece. Their compact rectangular shape makes them especially useful as modular scenery elements. They can be placed individually, arranged in rows, stacked on top of each other or combined with other terrain pieces to create larger structures. Use them to build storage yards, loading docks, defensive barriers, chokepoints or line-of-sight blocking sections across the board. One of the main strengths of this kit is its modularity. The containers can be freely positioned in multiple configurations to adapt to different mission layouts, board sizes and gaming styles. They can work as scatter terrain, cargo storage, objective scenery or part of a larger battlefield layout. Stack them vertically to create taller blocking terrain, place them side by side to form defensive walls, or spread them across the table to provide smaller areas of cover for advancing units. From a gameplay perspective, these plastic armoured containers are especially useful for creating more dynamic and tactical games. They can help break lines of sight, provide cover, create chokepoints and force players to make more interesting movement decisions during the battle. A well-placed container can protect infantry, block shooting lanes, divide the battlefield or create a key position that both players will want to control. They are part of the official WTC scenery and have been designed for matched-play environments and WTC-compatible tournament tables, where terrain placement, visibility, movement lanes, and balanced layouts are essential. Its modular and stackable design allows players, clubs, stores, and event organizers to quickly adjust the battlefield and create varied configurations for different scenarios, while its 28–32 mm scale also makes it compatible with other futuristic or modern miniature games such as Infinity, Zombicide: Invader, Deadzone, Warhammer 40k, Core Space, Kill Team, Necromunda, and Stargrave. The kit is made from injected plastic, offering sharp detail, durability, and a lightweight structure that is easy to handle during games. As the containers are supplied unassembled, we recommend using Cement Glue for Plastics for assembly, as it is specially designed to bond plastic parts securely and create strong, clean joins. Before or during assembly, hobbyists can also customize the containers by adding battle damage, modifying parts, applying decals, attaching extra accessories, or integrating them into larger terrain projects. Once assembled, they can be painted in many different styles, from clean military colours to rusty industrial tones, hazard stripes, weathered metal, desert dust, grime, oil stains or heavy battlefield damage. Their unpainted surface is also ideal for weathering techniques such as dry brushing, washes, chipping effects, pigments, rust streaks and airbrushed gradients. Thanks to their neutral sci-fi design, the Plastic Armoured Containers can be used across many miniature games and settings. They fit perfectly into futuristic, industrial, dystopian, grimdark, cyberpunk, military, post-apocalyptic or space opera environments, making them a practical and reusable terrain solution for any wargaming collection. Whether used as standalone scatter terrain or as part of a larger industrial battlefield, these containers are an essential scenery element for players looking to build immersive, functional and WTC-compatible tabletop environments. Content: 2x size 2.5'x2.5'x5' (64x64x128mm)

Read more less

Matched Play pre-painted 11th edition terrain, compatible with 28-32 mm grimdark sci-fi universe wargame and competitive tournaments. All components are deliverable as single products as well. Pre-painted Power Towers 11th edition (2-Pack)A set of fully pre-painted Energy Towers designed as scenery elements compatible with a wide range of futuristic miniatures games, and specifically tailored for the new 11th Edition terrain formats. These structures provide visual presence, tactical cover, areas of partial line-of-sight obstruction, and a consistent footprint for today’s game tables based on scenery layouts. As major structures, they function as solid pieces within the footprints, providing not only a more prominent visual presence but also tactical cover and partial or total line-of-sight blockage depending on their position on the battlefield. Unlike low or lightweight elements, they are not designed to be freely traversed by vehicles or monsters, which must go around them or move around their physical parts, while infantry, beasts, and swarms can better utilize the terrain to hide, take cover, and contest mission objectives. Inspired by hive cities, industrial worlds, imperial fortifications, manufactorum complexes, and futuristic war zones, these buildings with a grimdark industrial aesthetic fit perfectly into science fiction battlefields. Their details of machinery, generators, ducts, reactors, and fortified structures make them ideal pieces for representing mission objectives, terrain features, tactical cover, or strategic zones on the battlefield. Compatible with the Glasspack Footprints 11th Edition, adhering to the standard sizes, heights, and proportions used in competitive Matched Play tournaments. Thanks to their elevated design and industrial silhouette, they help create balanced, functional, and visually immersive tables, whether for casual games, tournaments, clubs, or event organizers. Each building comes fully pre-painted in neutral sci-fi tones with weathered effects, allowing them to blend seamlessly with any army, board, or battle theme. Additionally, they include fluorescent methacrylate elements that stand out visually on the battlefield, representing power sources, active cores, or functioning technology. They are ready to use after a simple initial assembly, offering a practical solution for players looking for an attractive and eye-catching game table without spending extra time painting the scenery. This pre-painted terrain for science fiction wargames is made of MDF, providing a sturdy, stable, and easy-to-transport structure. It’s perfect for quickly enhancing any game table with functional terrain, a grimdark aesthetic, and compatibility with 28-32mm miniature games such as Warhammer 40,000, Kill Team, Necromunda, StarCraft, Infinity, Deadzone, Core Space, Stargrave, and Zombicide: Invader. For assembly, we recommend using PVA glue, as it works especially well with MDF, ensuring strong and durable bonds. We do not recommend using cyanoacrylate, as it may result in weaker bonds or damage the pieces with prolonged use. Contents: 2× Pre-painted Power Tower buildings.

Read more less

Matched Play pre-painted 11th edition terrain, compatible with 28-32 mm grimdark sci-fi universe wargame and competitive tournaments. All components are deliverable as single products as well. Pre-painted Power Generators and Barricades 11th Edition (2+4 Pack)A set of pre-painted power generators and barricades designed as scenery elements compatible with a wide range of futuristic miniatures games, and specifically tailored for the new 11th Edition terrain formats. These structures provide visual presence, tactical cover, areas of partial line-of-sight obstruction, and a consistent footprint for modern gaming tables based on scenery layouts. By combining pre-painted power generators and barricades, this set includes two types of scenery with distinct functions on the battlefield: Generators are considered major structures, so they function as solid pieces within the footprint, providing a prominent visual presence, tactical cover, and partial or total line-of-sight blocking depending on their position. Unlike low or light elements, they are not intended to be freely traversed by vehicles or monsters, which must go around them or move around their physical parts.On the other hand, barricades act as low or light elements, designed to demarcate zones, provide cover, and allow for more fluid movement on the table, including the passage of large units according to applicable rules. Infantry, beasts, and swarms can particularly take advantage of these terrain areas to hide, gain cover, and contest mission objectives.Inspired by hive cities, industrial worlds, imperial fortifications, manufactorum complexes, and futuristic war zones, these buildings with a grimdark industrial aesthetic fit perfectly into science fiction battlefields. Their details of machinery, generators, ducts, reactors, and fortified structures make them ideal pieces for representing mission objectives, terrain features, tactical cover, or strategic zones on the battlefield. Compatible with the Glasspack Footprints 11th Edition, adhering to the standard sizes, heights, and proportions used in competitive Matched Play tournaments. Thanks to their elevated design and industrial silhouette, they help create balanced, functional, and visually immersive tables, whether for casual games, tournaments, clubs, or event organizers. Each building comes fully pre-painted in neutral sci-fi tones with weathered effects, allowing them to blend seamlessly with any army, board, or battle theme. Additionally, they include fluorescent methacrylate elements that stand out visually on the battlefield, representing power sources, active cores, or functioning technology. They are ready to use after a simple initial assembly, offering a practical solution for players looking for an attractive and eye-catching game table without spending extra time painting the scenery. This pre-painted terrain for science fiction wargames is made of MDF, providing a sturdy, stable, and easy-to-transport structure. It’s perfect for quickly enhancing any game table with functional terrain, a grimdark aesthetic, and compatibility with 28-32mm miniature games such as Infinity, Deadzone, Core Space, Warhammer 40,000, Kill Team, Necromunda, StarCraft, Stargrave, and Zombicide: Invader. For assembly, we recommend using PVA glue, as it works especially well with MDF, ensuring strong and durable bonds. We do not recommend using cyanoacrylate, as it may result in weaker bonds or damage the pieces with prolonged use. Contents: 2× Pre-painted Power Generators and 4x Defensive Barricades

Read more less

Matched Play pre-painted 11th edition terrain, compatible with 28-32 mm grimdark sci-fi universe wargame and competitive tournaments. All components are deliverable as single products as well. Pre-painted Plasma Walls and Communications Towers 11ª edition (2+2 Pack)A set of pre-painted plasma walls and communications towers designed as scenery elements compatible with a wide range of futuristic miniatures games, and specifically tailored for the new 11th Edition terrain layout. These structures provide visual presence, tactical cover, areas of partial line-of-sight obstruction, and a consistent footprint for today’s game tables based on scenery layouts. By combining pre-painted plasma walls and communications towers, this set includes two types of scenery with distinct functions on the battlefield: Communications towers are considered major structures, so they function as solid pieces within the footprint, providing a prominent visual presence, tactical cover, and partial or total line-of-sight blocking depending on their position. Unlike low or light elements, they are not intended to be freely traversed by vehicles or monsters, which must go around them or move around their physical parts.On the other hand, plasma walls or plasma coil arrays act as low or light elements, designed to demarcate zones, provide cover, and allow for smoother movement on the table, including the passage of large units according to applicable rules. Infantry, beasts, and swarms can particularly take advantage of these terrain areas to hide, gain cover, and contest mission objectives.Inspired by hive cities, industrial worlds, imperial fortifications, manufactorum complexes, and futuristic war zones, these buildings with a grimdark industrial aesthetic fit perfectly into science fiction battlefields. Their details of machinery, generators, ducts, reactors, and fortified structures make them ideal pieces for representing mission objectives, terrain features, tactical cover, or strategic zones on the battlefield. Compatible with the Glasspack Footprints 11th Edition, adhering to the standard sizes, heights, and proportions used in competitive Matched Play tournaments. Thanks to their elevated design and industrial silhouette, they help create balanced, functional, and visually immersive tables, whether for casual games, tournaments, clubs, or event organizers. Each building comes fully pre-painted in neutral sci-fi tones with weathered effects, allowing them to blend seamlessly with any army, board, or battle theme. Additionally, they include fluorescent methacrylate elements that stand out visually on the battlefield, representing power sources, active cores, or functioning technology. They are ready to use after a simple initial assembly, offering a practical solution for players looking for an attractive and eye-catching game table without spending extra time painting the scenery. This pre-painted terrain for science fiction wargames is made of MDF, providing a sturdy, stable, and easy-to-transport structure. It’s perfect for quickly enhancing any game table with functional terrain, a grimdark aesthetic, and compatibility with 28-32mm miniature games such as Infinity, Deadzone, Core Space, Warhammer 40,000, Kill Team, Necromunda, StarCraft, Stargrave, and Zombicide: Invader. For assembly, we recommend using PVA glue, as it works especially well with MDF, ensuring strong and durable bonds. We do not recommend using cyanoacrylate, as it may result in weaker bonds or damage the pieces with prolonged use. Contents: 2x Pre-painted Plasma Coil Array and 2x Cogitator Relay Tower

Read more less

Matched Play pre-painted 11th edition terrain, compatible with 28-32 mm grimdark sci-fi universe wargame and competitive tournaments. All components are deliverable as single products as well. Pre-painted Tall and Short Corner Walls 11th Edition (4+4 Set)A set of pre-painted tall and short corner walls, designed as scenery elements compatible with a wide range of futuristic miniatures games, and specifically tailored for the new 11th edition terrain layouts. These pieces are designed to represent the terrain elements marked in yellow on the new terrain layouts, serving as light walls, barricades, defensive corners, and tactical obstacles on the battlefield. Unlike the main structures, these walls do not act as large, solid buildings or as complete line-of-sight blockers. They are considered low or light elements, designed to delineate scenery zones, provide tactical cover, and create defensive lines without excessively disrupting the flow of the game. According to the new terrain rules, these types of elements can be traversed more easily by large units, including vehicles and monsters, helping to maintain a more dynamic flow of play within the scenery footprints. Infantry, beasts, and swarms can use these walls to better position themselves, gain cover, partially conceal themselves, and contest mission objectives within terrain areas. Their corner-shaped design allows for the creation of defensive zones, closing off corners of ruins, marking objective boundaries, or visually reinforcing strategic points on the battlefield. Compatible with the Glasspack Footprints 11th Edition, adhering to the standard sizes, heights, and proportions used in competitive Matched Play tournaments. Thanks to their elevated design and industrial silhouette, they help create balanced, functional, and visually immersive tables, whether for casual games, tournaments, clubs, or event organizers. This pre-painted terrain for science fiction wargames is made of MDF, providing a sturdy, stable, and easy-to-transport structure. It’s perfect for quickly enhancing any game table with functional terrain, a grimdark aesthetic, and compatibility with 28-32mm miniature games such as Infinity, Deadzone, Core Space, Warhammer 40,000, Kill Team, Necromunda, StarCraft, Stargrave, and Zombicide: Invader. This 11th Edition wall set does not require permanent assembly or the use of glue. The pieces feature a quick-connect system that allows them to be easily joined and separated, making it simple to set up on the table and take down after each game. Thanks to this modular system, they can be assembled in just a few seconds and stored more compactly for transport or storage. Contents: 4× low corner walls and 4× high corner walls.

Read more less

Matched Play pre-painted 11th edition terrain, compatible with 28-32 mm grimdark sci-fi universe wargame and competitive tournaments. All components are deliverable as single products as well. Pre-painted Foldable Single Storey ruins 11th Edition (Set of 8 Buildings)A set of fully pre-painted, foldable single-story ruined buildings, designed to create visually appealing, ready-to-play game tables for both competitive matches and balanced matched-play games. This set includes 8 structures designed to adapt to the terrain layouts and game systems of the 11th edition based on area templates or Glasspack; furthermore, they are fully configurable in terms of shape, providing visual presence, tactical cover, and areas of partial line-of-sight blocking. As major ruined structures, they function as solid pieces within the terrain area, helping to define cover zones, defensive positions, and strategic points on the battlefield. They are not designed to be freely traversed by vehicles or monsters, which must go around them or move around their physical parts, while infantry, beasts, and swarms can better utilize these areas to hide, take cover, and contest mission objectives. Each building includes pre-cut sections that make it easy to customize the scenery by breaking off or modifying corners to create more open and realistic ruins. In addition, the windows are closed by default, but can be easily opened if you want to add more visibility, lines of fire, or tactical variety to the game table. Their most notable feature is that they are fully foldable. This allows you to set up a complete battle table in just a few minutes and, once the game is over, fold the buildings for convenient and compact transport or storage. An ideal solution for players, clubs, and tournaments that need beautiful, functional, durable, and easy-to-store scenery without spending extra time painting or taking up too much space. Compatible with the Glasspack Footprints 11th Edition, adhering to the standard sizes, heights, and proportions used in competitive Matched Play tournaments. Thanks to their elevated design and industrial silhouette, they help create balanced, functional, and visually immersive tables, whether for casual games, tournaments, clubs, or event organizers. This pre-painted terrain for science fiction wargames is made of MDF, providing a sturdy, stable, and easy-to-transport structure. It’s perfect for quickly enhancing any game table with functional terrain, a grimdark aesthetic, and compatibility with 28-32mm miniature games such as Warhammer 40,000, Kill Team, Necromunda, StarCraft, Infinity, Deadzone, Core Space, Stargrave, and Zombicide: Invader. For assembly, we recommend using PVA glue, as it works especially well with MDF, ensuring strong and durable bonds. We do not recommend using cyanoacrylate, as it may result in weaker bonds or damage the pieces with prolonged use. Contents: 2+2+2+2 pre-painted fold-out buildings 11th edition. This product is independently designed and is not affiliated with, authorized, approved, or endorsed by any of the manufacturers mentioned. Green Stuff World only manufactures and markets compatible products designed for use with these and other lines of miniatures. 

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Plastic Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Metal Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Traffic Lights 70mm printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 2x standard + 4x pedestrian (70mm height)Scale: 1:58 - 1:48Content: 6x 

Read more less

Bicycles printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45 x 25 mmScale: 1:58 - 1:48Content: 2x 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x50mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x70mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 10 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 6 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 20 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 30 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

Closed cell XPS foam 30mm | Closed cell extruded polystyrene foam | Blue Board Closed-cell extruded polystyrene foam XPS also called Blue Board or Styrofoam is lightweight, tough, durable, and ideal for crafting terrains such as hills and cliffs, making gaming boards, different model building elements such as bricks, and even buildings, and bases. It is a lightweight and durable material that is easy to work with, making it a popular choice among hobbyists and professionals. Extruded XPS is a closed-cell foam, which means it has a high resistance to moisture and is a good thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other model-building elements, including buildings, bases, and bricks, as well as ideal for making gaming boards, dioramas, and other DIY projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300x30mm Type: closed cell blue board Estimated Density: 36 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glues such as Tuft Glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

Infestation Set With this selection of materials and model paints, you will be able to replicate environments infested by alien creatures. The different pigments, textures, putty, fluorescent vegetation, creatures, and xenomorph structures included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike, these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Red 30ml Martian Textures - Fluor Purple 30ml Fluor Pigments - Green Lime 30ml Fluor Pigments - Fluor Pink 30ml Blood Effects - Prince Tau 17ml Blood Effects - Demon 17ml Splash Gel - Water Effects 30ml Dry Brush Paint - Coral touch 30ml Islandmoss - Light Pink Islandmoss - Violet Martian Fluor Grass - Punkpink Neon Martian Tufts 6mm - On Fire Purple Green Stuff Putty 15cm (6 inches) Resin pieces

Read more less

Avatar World Set With this selection of materials and model paints you can replicate the effects of alien environments with extravagant Martian plants and strident colors. The different pigments, textures, alien plants, fluorescent Martian vegetation, and hyper-realistic crystals included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Purple 30ml Martian Textures - Fluor Blue 30ml Fluor Pigments - Light Orange 30ml Dry Brush Paint - Ultramarine touch 30ml Dry Brush Paint - Dry Violet 30ml Martian Tufts 6mm - Neon Yeti Blue Martian Tufts 6mm - Neo-Titan Orange Martian Fluor Grass - Wildfire Green Basing Bark Chips Islandmoss - Fuchsia Islandmoss - Grey Resin pieces

Read more less

The GSW Army Transport Backpack is the backpack version of our Army Transport Bag specifically designed to protect your figures during transport. It can be used on your back, or simply as a travel bag with a cross strap to carry it on your shoulder. The GSW miniatures transport backpack is an essential accessory for wargame players and miniatures collectors. This product stands out for combining functionality, durability, and comfort, providing an optimal solution for transporting and protecting delicate miniatures during travel and relocation. The backpack is made of Oxford fabric, known for its lightness and resistance, which makes it ideal to withstand frequent use and adverse transport conditions. In addition, its padding ensures additional protection against impacts and falls, guaranteeing that the miniatures arrive in perfect condition at their destination. With a capacity to carry more than 200 figures, this backpack is perfect for those who need to carry a large number of miniatures to tournaments, gaming sessions or exhibitions. The miniatures are distributed among four levels, allowing for efficient and accessible organization. This storage system is complemented by removable metalized trays, which make it easy to arrange and access miniatures. The MDF trays have an adhesive metal coating which provides a stable and secure base for the magnetized figures. The backpack includes four trays, as well as 21 adjustable heights, allowing the internal space to be customized according to the specific needs of each user and the size of the miniatures. To ensure the integrity of the backpack and the safety of its contents, the GSW includes a reinforced MDF cabinet. This internal structure provides rigidity and durability, protecting the miniatures from possible crushing or deformation during transport. In addition, the GSW backpack is designed to be extremely versatile in terms of transportation. It can be used as a traditional backpack, carrying it comfortably on the back, or as a travel bag, using a crossbody strap to carry it over one shoulder. Comfort of use is another outstanding feature of this backpack. In addition to its capacity and strength, the GSW is equipped with a long shoulder strap and a top handle, elements that are designed to provide comfortable handling. These details allow the backpack to be lifted and carried with ease, even when fully loaded. For those who need additional space, the GSW backpack offers a modification option. It is possible to remove the first lower removable tray and glue the metalized rubber directly to the base of the drawer. This process involves trimming the rubber with scissors to fit snugly into the base structure. By doing this, the lower level is no longer removable, but you gain a few extra inches of internal space, which can be crucial for carrying larger miniatures or additional accessories. As for its dimensions, the backpack measures 45x30x18 cm, making it compact and easy to handle. Its total weight is 3.2 kg, which makes it light considering its carrying capacity and level of protection. Assembly instructions are included inside the backpack, providing detailed guidance for the correct placement and adjustment of the trays. This ensures that users can set up their backpacks efficiently and safely, making the most of the available space. Includes: 1x Warhammer backpack 1x Complete cabinet 4x Trays +4x adhesive metallized rubber sheet Warning: This carrying case must protect your wargame armies, so it is absolutely necessary to reinforce the assembly with PVA glue.

Read more less

Mirror Spray Paint 400ml Chrome spray paint is a specialized aerosol designed to create a reflective, mirror-like finish on various surfaces. This type of Mirror Spray Paint contains fine metallic particles suspended in a solvent-based medium, which, when applied, align to produce a shiny, chrome-like appearance. It is commonly used in automotive, decorative, and DIY projects to achieve the look of chrome plating without the associated costs and complexities. Mirror spray paint is versatile and can be applied to various surfaces, including metal, plastic, and wood. This adaptability makes it ideal for numerous applications, ranging from automotive parts and accessories to home décor and DIY projects. However, to achieve the best results on different materials, it may be necessary to use specific preparation techniques, such as applying primers designed for the particular type of surface, whether plastic or metal. The final appearance of the mirror spray paint will significantly depend on the color and texture of the surface being painted. To achieve a consistent and reflective finish, it is highly recommended to apply a glossy black primer before starting the painting process. This step ensures that the metallic particles in the paint align correctly, enhancing the reflective properties and providing a smoother, mirror-like finish. The texture of the base surface also plays a crucial role in the final result, so: A matte black base will produce a burnished metal look A satin black base will result in a nice silver metallic finish. For the most mirror-like effect, a glossy black base is essential. This glossy undercoat will maximize the reflective quality of the paint, creating a true mirror effect. INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Do not apply too much paint in one spot to avoid the "eye cat effect". This type of paint should be applied with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Keep the spray at 90º during use. - Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS: Keep out of children's reach. Keep away from heat/sparks / open flames / hot surfaces. Do not spray on an open flame or another source of ignition. Do not pierce or burn, even after use. Keep the recipient hermetically sealed. IN CASE OF INHALATION: Remove the person to fresh air and keep in a position that facilitates breathing. IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.

Read more less