Primer

The Colour Forge Matt spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). For the best results: Shake the can thoroughly for 5 minutes. Pour warm water over the body of the can to bring it up to room temperature. Repeat until all paint is warmed through. Hold spray 12 inches from the model and use short passes over the uncovered areas until the model is covered After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Read more less

Pro Acryl PRIME is the absolute best hobby primer you can get! We've formulated our primers to give great flow through your airbrush with no thinning required and easy cleanup, but also to work great by brushing them on with 2 quick, light coats! Great matte finish and strong adhesion to make sure all your paint grabs the model the way it should. In addition, they are color-matched to their normal Pro Acryl counterpart! 120ml bottle. Make sure to allow the primer to cure fully for best results.

Read more less

The Colour Forge Matt spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). For the best results: Shake the can thoroughly for 5 minutes. Pour warm water over the body of the can to bring it up to room temperature. Repeat until all paint is warmed through. Hold spray 12 inches from the model and use short passes over the uncovered areas until the model is covered After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Read more less

Gloss Surface Primer 60ml - Black Acrylic priming paint is applied with a brush or airbrush over clean and dry surfaces (plastics, wood, metals, etc). Fast drying with a super glossy finish of extraordinary hardness and resistance which doesn't hide the details. For Chameleon and Chrome paints this Gloss Black Primer is the ideal base coat primer. Contains: 60 ml *NOTE: Do not use this paint with alcohol-based thinners as it damages the paint and could clog the airbrush. The GSW thinner and airbrush cleaner are perfectly compatible with this paint.

Read more less

Pro Acryl PRIME is the absolute best hobby primer you can get! We've formulated our primers to give great flow through your airbrush with no thinning required and easy cleanup, but also to work great by brushing them on with 2 quick, light coats! Great matte finish and strong adhesion to make sure all your paint grabs the model the way it should. In addition, they are color-matched to their normal Pro Acryl counterpart! 120ml bottle. Make sure to allow the primer to cure fully for best results.

Read more less

Pro Acryl PRIME is the absolute best hobby primer you can get! We've formulated our primers to give great flow through your airbrush with no thinning required and easy cleanup, but also to work great by brushing them on with 2 quick, light coats! Great matte finish and strong adhesion to make sure all your paint grabs the model the way it should. In addition, they are color-matched to their normal Pro Acryl counterpart! 120ml bottle. Make sure to allow the primer to cure fully for best results.

Read more less

Gloss Primer White 400ml Gloss White Primer Paint with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent gloss finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children's reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove the person to fresh air and keep him in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.

Read more less

SPRAY Primer Colour Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.  The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering. Contents 1x Spray can 400ml INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.  

Read more less

- 400ml - Retributor Armour - primer dus een onderlaag en hechtlaag voor je gaat verven - vloeit goed de naden dicht

Read more less

The Colour Forge Matt spray offers exceptional coverage and quality without the price tag. Using a tried and tested formula this product is on par with the best in the industry. Presented in a 500ml rattle can (25% more than other brands on the market!). For the best results: Shake the can thoroughly for 5 minutes. Pour warm water over the body of the can to bring it up to room temperature. Repeat until all paint is warmed through. Hold spray 12 inches from the model and use short passes over the uncovered areas until the model is covered After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.

Read more less

Volume: 150 ml This self-leveling coating is useful for filling bumps, dents, scratches, for removing bubbles, texturing… It is suitable for large-scale repairs and can be used as soluble putty. Before using Microfiller primer you will need to shake the spray well, at least a minute to get a good mixture. Once dry, it perfectly covers all the small imperfections, scratches, moulding marks, sanding abrasions and all minor defects. Then, after a smooth sanding, you’ll have a perfect surface for successfully applying the paint that suits you best.

Read more less

- Mod Podge Outdoor - vernis dat kleurloos en transparant opdroogt - speicaal voor projecten die de elementen moeten kunnen weerstaan- Lijm, vernis en sealer voor alle ondergrond in tabletop, diorama en scenery- Geschikt voor gebruik op alle materialen.- Samenstelling op waterbasis.- Inhoud per pot 473ml. Let op: afhankelijk van temperatuur en vochtigheid kan Mod Podge Outdoor langer plakkerig aanvoelen. Ons advies is binnenshuis goed uit te laten drogen/harden indien dit mogelijk is. Mod Podge is een transparante decoupagelijm en lak in één. De lijm is gemakkelijk in het gebruik en geschikt voor de meest uiteenlopende materialen en ondergronden zoals papier, stof, hout enz. Daarnaast heeft Mod Podge een snelle droogtijd en is het makkelijk om meerdere lagen aan te brengen. Mod Podge is op waterbasis en dus gemakkelijk schoon te maken (wacht hier niet mee tot de lijm is opgedroogd). Daarnaast is Mod Podge ook vrij van schadelijke materialen en dus geschikt voor kinderen. Mod Podge outdoor geeft een mat eindresultaat. Deze speciale uitvoering beschermt uw projecten tegen de weersinvloeden zoals zon en regen. Zelfgemaakte fairy garden meubeltjes, huizen of styrodur werken kunt u met dit produkt beschermen. Ook onze fairy garden produkten nog meer weerstand te bieden. De merken Fiddlehead, MiniatureWorld en Woodland Knoll worden standaard geleverd met meerdere lagen vernis en UV coating om juist buiten te staan, maar u kunt er altijd voor kiezen nog een laag aan te brengen.

Read more less

Volume: 400 ml THE PERFECT BASE FOR FAST, HIGH-CONTRAST, HIGH-QUALITY PAINTING.This off-white primer spray provides you with an ideal starting point: clean, uniform and ready to highlight every colour and detail with minimal effort. Designed to prime miniatures and optimise the application of contrast paints such as QUICK GEN. Its light, warm tone enhances colour vibrancy and facilitates natural light and shadoweffects in a single layer. It provides fine, even coverage with high adhesion, without obscuring details. It dries quickly and its controlled spray allows for clean application, even on complexshapes. The bone colour, balanced between white and light grey, acts as a neutral base that enhances tones without altering them. Ideal for fantasy, role-playing and wargaming figures, it is the perfect starting point for a quick and visually striking finish.

Read more less

Makes undercoating and basing your models simple Provides the perfect basecoat for Contrast paints Smooth satin finish Can size: 400ml Functioneert ook als primer Vloeit goed de naden dicht

Read more less

Makes undercoating and basing your models simple Provides the perfect basecoat for Contrast paints Smooth satin finish Can size: 400ml Functioneert ook als primer Vloeit goed de naden dicht

Read more less

Pro Acryl PRIME is the absolute best hobby primer you can get! We've formulated our primers to give great flow through your airbrush with no thinning required and easy cleanup, but also to work great by brushing them on with 2 quick, light coats! Great matte finish and strong adhesion to make sure all your paint grabs the model the way it should. In addition, they are color-matched to their normal Pro Acryl counterpart! 120ml bottle. Make sure to allow the primer to cure fully for best results.

Read more less