Tabletop Games

Dedicated marksmen, Eliminators haunt the shadows of the battlefield, seeking out targets of opportunity and bringing them down with pinpoint volleys of fire. Then, these silent assassins slip away looking for their next prey. Each model in this squad can be armed either with a las fusil, which is perfect for taking out the toughest targets, or a bolt sniper rifle, which provides a choice of ammunition to suit any situation. The Sergeant can also be armed with an instigator bolt carbine. All three models can be assembled with or without helmets and the kit comes with a number of optional parts allowing you to individualise the unit. The plastic kit is made up of 60 components and makes three Eliminators. Each model is supplied with a Citadel 40mm Round base. The set also includes a Primaris Space Marines Infantry transfer sheet. #40K #Space #Marines #primaris #eliminators

Read more less

Necron Warriors form the majority of a tomb world's nigh-inexhaustible armies. They are a corps of fleshless mechanoids, ranged in their millions against the vital races of the galaxy. Ancient limbs are corroded with age, yet the strength of their metal sinews has not faded, nor has the hard-wired loyalty to their Overlords. Canoptek Scarab Swarms are found throughout tomb worlds and Necron spacecraft, where automated routines compel them to break down damaged matter of all kinds with their entropic mandibles. They feed on organic and non-organic matter alike, converting it into energy which is re-routed into repair protocols. Whether you're looking to cut down the enemy at range with gauss flayers or march inexorably forward to shred them at close range with gauss reapers, all the while assailing them with swarms of Canoptek Scarabs, this is the perfect kit to build your Necron army around. This kit builds ten Necron Warriors – each with a choice of two heads and the option of either a gauss flayer or gauss reaper – as well as three Scarab Swarms. Push-fit construction means you won't need any glue to build it. The kit is supplied in 70 plastic components and comes with ten Citadel 32mm Round Bases and three Citadel 40mm Hex Hole Round Bases  #necron #warriors #40k #9th

Read more less

Light reconnaissance units, Pathfinder Teams are the eyes and ears of their Commander in a way no drone can yet emulate. A Pathfinder's foremost role is not to engage the enemy, but instead to operate ahead of their comrades, close to their foe, to accurately scout the enemy. There are 10 Pathfinders in this kit, and they can be built in a variety of ways – there are different leg options, for kneeling, crouching or standing, as well as different head options. They sport lighter recon armour, which covers their torso, shoulders, knees and elbows, and they wear the similar long, elegant helmets to Fire Warriors. They can carry a selection of weapons including pulse carbines, rail rifle, and ion rifles. The kit includes an enormous Recon Drone, which can be mounted on a Devilfish tank (not included), and which comes armed with a burst cannon. The box set also features a Pulse Accelerator Drone, with a four-pronged device underneath the circular disc, and the Grav-inhibitor Drone that features an orb underneath. This multi-part plastic kit contains 137 components with which to make 10 T'au Pathfinders, a Pulse Accelerator Drone, a Grav-inhibitor Drone and a Recon Drone. These kits comes supplied unpainted and require assembly - we recommend using Citadel Plastic Glue and Citadel Paints.

Read more less

Cadia's officer class are exceptional leaders, serving in perhaps the Imperium's most outstanding regiments. Trained to be the very best and surrounded by a cadre of hand-picked guards and aides, these uncompromising veterans expect no less from the troops under their command. Some are as inspiring as the regimental standards carried in their wake, while others are as motivational as the curt orders issued by their vox operators.This multipart plastic kit builds a Cadian Command Squad, made up of a Cadian Commander and four Veteran Guardsmen. The Cadian Commander is armed with your choice of a laspistol, bolt pistol, or plasma pistol in one hand, and a chainsword, power sword, or power fist for the other. Each of the accompanying Veterans is equipped differently – one field medic with a lasgun and medi-pack, one vox operator with a laspistol and master vox system, one bodyguard with a laspistol and your choice of chainsword, power sword, or power fist, and one standard bearer carrying a lasgun alongside a regimental standard. The bodyguard and banner bearer can each instead be built as weapons specialists, armed with your choice of a flamer, grenade launcher, meltagun, or plasma gun.The kit includes even more cosmetic choices to make your Command Squad stand out, like magnoculars, slung and stowed weapons, three finials for the regimental standard, and loads of different head and basing options than can be mixed and matched around the squad – enough to ensure that each Command Squad in your army looks like the unique veterans they are.This kit comprises 123 plastic components, and is supplied with 5x Citadel 28.5mm Round Bases. Also included is an Astra Militarum Infantry Transfer Sheet, with 597 transfers featuring numerals, squad markings, and Cadian regimental heraldry. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. #Cadian #command #squad

Read more less

Tactical Squads are the backbone of any Space Marine army. They hold ground; provide fire support and charge into bloody melees, as the ever-changing theatre of war dictates. This box contains everything you need to make a highly personalised 10 man Tactical Squad, including Sergeant and Special Weapon. There are so many options and extra details provided that we recommend that you take some time to look through the photos above to fully appreciate them all. Space Marines In order to build the Tactical Squad you get 11 torso fronts (of which 10 are unique designs); 10 different leg poses; 16 different heads (13 with helmets, 3 bare-headed); 22 shoulder pads; 10 backpacks (of which 9 are individual designs); and 10 sets of left and right arms. Weapons There are 10 unique boltguns, a gravgun, a meltagun, a plasma gun, a flamer, a missile launcher (including backpack and spare missiles). The squad Sergeant can be armed with a combination of power fist, power sword or chainsword, and plasma pistol, grav pistol or bolt pistol. You can also make any 1 of the following combi-bolters – combi-grav, combi-melta, combi-plasma, or combi-flamer. The squad can also be armed with a melta bomb, a selection of combat knives, and enough Frag and Krak grenades to arm each Space Marine. Extra equipment As if that wasn’t enough, you also get: a back banner for the squad sergeant (with the choice of 3 different banner tops); a holstered bolt pistol; targeting scopes for the boltguns; parchments and purity seals; ammo pouches; an auspex; and 3 spare hands (1 pointing, 1 holding a grenade, and 1 holding a boltgun cartridge). This plastic kit contains 179 components with which to make a 10 man Tactical Squad (and so much more!). Also included are 2 Ultramarines Infantry Transfer Sheet with which to add Chapter iconography and squad markings. This kit comes supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints.

Read more less

All of the Orders have adopted a loosely decentralized model of operations for their forces. This is in large part due to the conflicting nature of their goals, but also closely tied to the idealism of their cause and the zeal with which they pursue it. Most Orders forces are concentrated in small groups called cloisters that usually operate from a single fortified monastery or abbey. A priory Commander is the greatest amongst his peers, elected by them to lead them in combat and represent their interests at the round table of Argem. Box Contents ●    1 Plastic Character Miniature●    1 Infantry Plastic Base●    1 Command Card Product Information ●    Assembly: Required. ●    Box size: 10.4x7.4x3.8cm; 114grs●    Material: Plastic●    Scale: 38mm In Game Role ●    Battlefield Role: Character●    Class: Heavy●    Type: Calvary #hundred #kingdoms #order #crimson #tower #cavalry #priory #commander

Read more less

When the Abhoreth Spire fell to the Dweghom advance, it was not only the W’adrhun who were released, millenia upon millennia of predatory and dangerous creatures, dormant fodder for the twisted Spire experiments, were released as well. Of all those countless creatures, none has thrived like the Apex Predator. This monstrous beast has been harnessed by the W’adrhun as a living engine of destruction, lending its primal savagery to that of the W’adrhun forces. The kit also includes a rider, an alt sculpt of the Predator character. NEW- printed assembly manuals included in each box. Box Contents ●    1 Plastic Monster Miniature with an alternative head●    1 Plastic Rider Miniature●    1 Plastic Monster Base and Tray●    1 Command Card Product Information ●    Assembly: Required. ●    Box size: 3030x6cm; 410grs●    Material: Plastic●    Scale: 38mm, Miniature Height: 13cm In Game Role ●    Battlefield Role: Restricted Heavy Monster●    Class: Heavy●    Type: Monster #conquest #w'adrhun #apex #predator #monster

Read more less

Not all beasts employed by the W’adrhun are hulking monstrosities that dominate the battlefield. They have in fact almost managed to domesticate a smaller breed, affectionately called the uzibukhali, (smart claw). Packs of these feathered menaces roam W’adrhun settlements keeping them clear of vermin and smaller predators in exchange for scraps and access to the charnel pits. In times of war they are easily wrangled into packs and unleashed upon the scouts and forerunners of the enemies force, their cunning and ferocity making them more than a match for more powerful opponents. Box Contents ●    Contains 18 Plastic Miniatures●    3 Plastic Cavalry Stands ●    3 Cavalry Bases ●    1 Command Card. Product Information ●    Assembly: Required. ●    Box size: 30x15x6cm; 300g●    Material: Plastic●    Scale: 38mm In Game Role ●    Battlefield Role: Mainstay Cavalry Unit●    Class: Light●    Type: Cavalry #conquest #w'adrhun #hunting #pack #uzibukhali

Read more less

Box Contents ●    1 Resin Character Miniature●    1 Infantry Plastic Base Product Information ●    Assembly: Required. ●    Box size: 7.4x10.4x3.7cm; 50grs●    Material: Resin●    Scale: 38mm In Game Role ●    Battlefield Role: Character●    Class: Medium●    Type: Monster Lore When the Dweghom turned on their creators it was their affinity for sorcery and metallurgy that allowed them to create weaponry capable of threatening even creatures as mighty as the Dragons. Hellbringer Socerers are the custodians of this ancient craft and even to this day ride the debased descendants of their ancestral enemies, ready to rain down hell on their unsuspecting opponents. !! deze sorcerer past dus juist op de Hellbringer Drake !! #conquest #hellbringer #sorcerer #wizard #lizard

Read more less

Following the defeat of the Dragons, it has long been a common practice among the Dweghom Holds to capture and break the lesser draco-forms to service. These drakes haul the Hellbringer Cannons, weapons designed to hunt and kill dragons and level cities - as well as anything else unlucky enough to find itself in its line of fire. Plastic components. Contents: 4 Miniatures   ‣ 1 Hellbringer Drake with alternative head   ‣ 3 Riders 1 Round Base (100mm) 1 Base Tray 1 Command Card Miniatures are supplied unpainted and assembly is required. Assembly: Required.  Box size: 3030x6cm; 410grs Material: Plastic Let op dit is medium size in 38mm (hoogte 15cm, lengte ruim 25cm en breed 15cm) dus een stevig formaat! #conquest #hellbringer #drake #dweghom #lizard

Read more less

Lore While they don’t like admitting it, all Nords know that they share a bond of blood with the Trolls who sacrificed more than any other to secure victory over the Jötnar in battles that have been swallowed by myth and legend. Today trolls march at the vanguard of most Nord forces, their preternatural endurance and healing abilities allowing them to shrug off even the most powerful weapons of the enemy. Box Contents ●    Contains 12 Plastic Miniatures (with the option of making 2 command models) ●    3 Plastic Infantry Stands ●    12 Bases ●    1 Command Card. Product Information ●    Assembly: Required. ●    Box size: 18x18x9cm; 410g●    Material: Plastic●    Scale: 38mm, Miniature Height: 5.6cm In Game Role ●    Battlefield Role: Mainstay Line Infantry●    Class: Medium●    Type: Infantry #trolls #nords #conquest

Read more less

Product Contents 1 Lake House 4 Wall Panels 2 Floor Tiles 2 Roof Panels 1 Roof Ridge 2 Roof Clips 2 Gable Panels 2 Stilt Supports 3 Raised Walkways 3 Walkways 12 Stilt Supports 1 Set of Steps 2 Rowing Boats 2 Barrels 1 Double-sided Lake/Large Bog 2 Double-sided Ponds/Small Bogs 8 Assorted Scatter Components and Accessories 20 Grey Plastic Clips Product Overview Those wishing to live by the water’s edge must adapt their homes, bedding stilted foundations into the lakebed and constructing raised wooden walkways to access their boats and the shore alike. This box contains everything you need to build a peaceful lake house, suitable for many 28-35mm fantasy and historical games. The interior is fully detailed and the roof is removable. The set comes complete with a lake, two ponds and 18″ / 45cm of raised walkways. Many of the pieces are modular and can be assembled in different combinations or mixed and matched with the rest of the range. The terrain is supplied flat-packed on high-quality, high-density card, printed in full colour on both sides, so no painting required! The terrain requires assembly, and some smaller parts will require glue. Note that this building is also included in the Village Core Set. #battlesystems #lake #house

Read more less

PRODUCT CONTENTS 8 Ship Cards 2 Plastic Enhanced Ship Dashboards 4 Plastic Dashboard Clips 2 Dashboard Overlays 2 Class Boards 20 Zone Inserts 16 Upgrade Inserts 32 Equipment Tokens 28 Ship Counters PRODUCT OVERVIEW This expansion upgrades your crews with Enhanced Ship Dashboards, representing large, customisable ships with a wide range of abilities that directly affect your games. Renovate and upgrade your new ship, direct your crew in the heat of battle, and manage the finely balanced reputation that comes with such a prestigious vehicle. This pack contains everything you need to upgrade up to two ships, along with eight pre-made Ship Cards and blank ones to make your own. The expansion contains two complete Enhanced Ship Dashboards, plus the rules and a full set of Ship Cards to place under the overlays. A Core Space Starter Set is required to use this expansion.

Read more less

PRODUCT CONTENTS 1 Galactic Corps Director Miniature 1 Galactic Corps Juggernaut Miniature 4 Galactic Guard Miniatures 2 Security Warden Miniatures 4 Character Boards 4 Apprehended Boards 1 Security Die 5 Event Cards 11 Equipment Tokens New Gaming Terrain Particle Transmitter CO2 Scrubber Storage Locker Conduit Bunk 4 Cargo Crates Mission Briefing and Rules Booklet PRODUCT OVERVIEW The Galactic Corps is an expansion for Core Space that introduces the disciplined Galactic Corps and the local Security Wardens – new types of NPC. Work with and against them in a series of thrilling new missions, and then add them to your regular games with the new Event Cards and Security Dice. They’re here for the Purge, but don’t get in their way! New terrain adds the centrepiece Particle Transmitter to your board, and new equipment such as the Riot Fist will give your crew new ways to survive! Requires the Core Space Starter Set to play

Read more less

A plastic miniature for Warhammer 40,000 Add a paragon of intolerance to your Adepta Sororitas army Ride the Throne of Blame into the fires of battle, wielding an arsenal of heavy weapons Smite enemies with the Mace of Saint Praxedes when they get too close Intranzia Fraye rides into battle atop her Throne of Blame, smiting the unclean while bellowing vox-amplified condemnations. Enemies singled out for her judgement become the focus of her sisters' ire, the Adepta Sororitas striving furiously to purge these heretics lest they themselves be judged and punished by their intolerant Dogmata Superior.Wield Fanaticism as a WeaponThis multipart plastic kit builds Intranzia Fraye, a severe and powerful leader for your Adepta Sororitas armies in games of Warhammer 40,000. Riding the Throne of Blame – a clanking walker armed with heavy bolters, heavy flamers, and a melta missile array – she judges the battlefield. When things get up close and personal, she puts her Mace of Saint Praxedes to good use, smiting the foes of the Imperium. This imposing miniature makes a fantastic centrepiece for your collection, offering a fresh challenge for painters. The kit includes a choice of 2 heads – bare or helmeted – offering a degree of customisation for the Dogmata Superior of the Order of Our Martyred Lady.Contents:– 55 plastic components– 1 Citadel 60mm Round Base– 1 construction guideThis miniature requires assembly and is supplied unpainted. We recommend:– Citadel Tools: Super Fine Detail Cutters– Warhammer Colour Plastic Glue– Citadel Colour paintsRules for using this miniature in your games of Warhammer 40,000 can be downloaded for free from the Warhammer Community website.

Read more less

A plastic miniature for Warhammer 40,000 Add the Chapter Master of the Ultramarines to your Space Marines army Brutally smash your way through the toughest of foes with the legendary Gauntlets of Ultramar Clad in ornate Terminator armour covered with honour markings This multipart plastic kit builds Marneus Calgar in Armour of Antilochus, a legendary Ultramarines commander for your Space Marines armies in games of Warhammer 40,000. This storied leader has earned his legendary status across an impressive career, and is considered one of the finest generals in the Imperium. In battle, he is a force of destruction, churning through hordes of enemies with the Gauntlets of Ultramar – in melee, these twin power fists make light work of even the very toughest of foes. Their built-in bolt weapons also make short work of enemies at range. This stunning miniature cuts an imposing figure on the table. He's loaded with intricate details, including hard-won honour markings, a cape, and a scenic base, which all make for a fine canvas on which you can demonstrate your painting skills.This kit comprises 18 plastic components and 1x Citadel 50mm Round Base. This miniature requires assembly and is supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.Rules for using Marneus Calgar in Armour of Antilochus in your games of Warhammer 40,000 can be downloaded for free from the Warhammer Community website.

Read more less

Lore:Loremasters and sages among their kind, the Seanchas Sidhe have accomplished what the Spires can only dream of: channeling the Elemental might of Ea directly as spellcasters. This was amongst the first and greatest of the gifts that the True Dragons heaped upon the Weavers as they sought refuge beneath their wings. Little is known of the rites and rituals these otherwise gregarious characters must undergo to attain this gift, but such is their influence and power that there is never a shortage of young hopefuls eager to set off to the Courts of Winter and Summer where such secrets might be mastered. How they play:   As a powerful spellcaster, the Seachas Sidhe can tap into the arcane powers of the Summer or Winter High Courts. In battle, they can consume Seed Markers to empower their spells, bringing a versatile toolkit of support spells and abilities!  Box Contents: ●    1 Plastic Character Miniature●    1 Plastic Base and Stand●    1 Command Card Product Information: ●    Assembly: Required●    Material: Plastic●    Scale: 38mm●    Box size: 15.4 x 14.4 x 3 cm; 130gr

Read more less

A plastic miniature for Warhammer 40,000 Add a berserk warrior to your World Eaters army Smash through enemy lines, empowered by the rage of a greater daemon of Khorne Packed with details, including skulls and a mutated daemonic weapon, making for a fun painting challenge The Slaughterbound share their forms with the possessing spirit of a Bloodthirster. Such an infernal fusion lends the host colossal strength and insatiable rage, driving them to reckless butchery. Containing such power requires a great force of will, however, and the demise of such a warrior is often explosive.This multipart plastic kit builds one Slaughterbound, a mighty daemon-possessed warrior for your World Eaters armies in games of Warhammer 40,000. This savage leader offers a bloodthirsty way to add even more hitting power to your charge, and inspires nearby warriors to even greater acts of skull-taking. He can be assembled with one of two different heads, and with or without an icon of Khorne rising over his head, offering a degree of customisation to your Bloodthirster-possessed brute.This kit comprises 25 plastic components, and 1x Citadel 50mm Round Base. This miniature requires assembly and is supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

A plastic miniature for Warhammer 40,000 Add an encouraging presence to your Black Templars army Inspire your battle-brothers and hack down opponents with a master-crafted power weapon Choose from one of two different decorative elements for the banner. Crusade Ancients are veteran wardens and honoured warriors of exceptional resolve and determination who carry icons and sacred standards into battle. They raise high the tapestries depicting the crusade’s victories and the God-Emperor’s glory, inspiring their fellow Black Templars to greater heights of weaponised hate.This multipart plastic kit builds one Crusade Ancient, a veteran warrior tasked with carrying a battle standard for your Black Templars armies in games of Warhammer 40,000. Crusade Ancients inspire their brethren to fight all the harder. Experts in combat, they fell enemies with heavy blows of their master-crafted power swords. Choose between two icon decorations – one themed around the Armageddon crusade with an Ork skull, and the other a blank shield, onto which you can paint your own heraldry.This kit comprises 16 plastic components and 1x Citadel 40mm Round Base. This miniature requires assembly and is supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

8 plastic miniatures for Kill TeamA complete kill team of Khorne-worshipping World Eaters cultists Features multiple options for special weaponry and equipment Includes a sheet of 38 tokens for use in games of Kill Team The Goremongers are rabid cultists who have seen the glory of Khorne daemons and lived to tell the tale. When they go to battle, they wield a wide variety of weapons, from great double-handed chainaxes to blood-letting knives, harpoons, and autopistols – arms to better let the blood flow.This multipart plastic kit builds 8 Goremongers. These miniatures can be used as bloodthirsty Goremongers operatives in games of Kill Team, or fielded in a World Eaters army in games of Warhammer 40,000. The kit includes options, accessories, and different heads to customise your kill team, plus components to build specialists like the murderous Skullclaimer, quicksilver Inciter, vicious Impaler, and more.Inside the box, you will also find a sheet of 38 double-sided Goremongers tokens, so you can easily keep track of your equipment and in-game effects in the heat of battle.This kit comprises 85 plastic components, and 8x Citadel 32mm Round Bases. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Three infantry weapons teams wielding exotic creations built by the Clans Skryre Can be assembled wielding one of three options Warpvolt Scourgers, Warpfire Throwers, and Ratling Guns Choose the right weapon to take down your foes in the name of the Horned Rat Warpspark Weapon Batteries are members of the Clans Skryre, who often go to war unnoticed among hordes of slavering Clanrats. When the time is right, they reveal themselves, unleashing their bizarre but mighty machines on an unsuspecting foe. Whether through a hail of bullets, gouts of eerie warpflame, or bolts of warp lightning, they reap a deadly harvest for the glory of the Horned Rat.This multipart plastic kit builds three weapons teams wielding one of three different machines of death. All of them can be somewhat unreliable, but are tailored to taking down different foes. Ratling Guns produce a potential hailstorm of hot lead for mowing down enemy hordes. Warpfire Throwers spew out an unquenchable green flame, and Warpvolt Scourgers are excellent at taking down foes with arcs of warp lightning. You'll find loads of cosmetic parts to swap around, including head options for each gunner, plus different weapon tips, backpacks, and more so you can easily personalise your units.This kit contains 63 plastic components, and 3x Citadel 60mm x 35mm Oval Bases. These miniatures are supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

6 plastic miniatures for Warhammer 40,000 Add elite Krieg Combat Engineers and their remote mine to your Astra Militarum army Lead from the frontlines, detonate mines, and torch your enemies Includes multiple options including parts for a Krieg Engineer Watchmaster, a remote mine controller, and more This multipart plastic kit builds five Krieg Combat Engineers, along with a remote mine miniature, for your Astra Militarum armies in games of Warhammer 40,000. This unit is great for getting up close and personal with the enemies of the God-Emperor, and is ideal for clearing trenches ahead of your main assault.The kit comes with lots of options, making it easy to customise the look of your miniatures, and ensure they have the right tools for any mission. Each Combat Engineer can be built armed with a combat shotgun, or an autopistol and a trench club. Alternatively, one can be armed with a flamer, and one equipped with a remote mine controller. Finally, one can be built as a Watchmaster who can be armed with a bolt pistol, autopistol, plasma pistol, hand flamer, or combat shotgun, and a chainsword, power weapon, trench club, or grenade.This kit comprises 109 plastic components, 5x Citadel 25mm Round Bases, and 1x Citadel 40mm Round Base. This set also includes 1x Death Korps of Krieg Transfer Sheet containing 803 waterslide transfers to customise your models.These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

A fast, hard-hitting hero to lead your Adepta Sororitas in battle Customise her with a variety of weapons to suit your preferred enemy Ideal to lead highly mobile armies and harass enemy flanks This multipart plastic kit builds a Canoness equipped with a jump pack to keep up with the fastest elements of your Adepta Sororitas army. This warrior leads from the front, and can wield a two-handed Eviscerator or halberd, or carry a power mace or sword in one hand, and a hand flamer in the other. You'll also find three different head options to customise your Canoness further.This kit contains 17 plastic components, and 1x Citadel 32mm Round Base. This miniature is supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Plagueburst Crawlers are lumbering, formidable siege tanks whose huge ram-blades, thick armour plating and daemonic energies provide them with incredible resilience. Their fearsome plagueburst mortars boast a parabolic fire arc and terrifying range, while the shells they fire combine high-radius explosives with lethal clouds of corrosive spores to inflict damage comparable to that of Imperial Demolisher cannon. The remainder of the Crawler’s weaponry is intended to slaughter the foe up close, spraying diseased slime and hails of vital shells at any who approach.This multi-part

Read more less

The hand-picked elite of the Adeptus Custodes Spectacular models clad in Allarus Terminator armour Kit contains options for a Shield-Captain and Vexilus Praetor This multi-part plastic kit contains the components necessary to assemble a 3-model squad of Allarus Custodians. Each is clad in spectacular, expertly-crafted Allarus Terminator armour – this is covered in finely sculpted sigils of the Emperor, with Imperial eagles, lightning bolts, gemstones and filigree covering every surface. They are armed as standard with with castellan axe and wrist-mounted balistus grenade launcher – each model can replace the axe with a guardian spear, as 3 are included. 4 misericordia daggers are also in the kit, 1 of which is a special variant for a Shield-Captain. 3 helmets and 3 bare heads are included, with 4 helmet plumes.You have the option to assemble 1 model as a Shield-Captain, using the specific shoulder pads, thigh plates, helmet plume and misericordia supplied, and 1 model can be assembled as a Vexilus Praetor, using the ornate vexilla in the kit.This kit comes as 73 components, and is supplied with 3 Citadel 40mm Round bases.

Read more less

A complete kill team of of stoic Leagues of Votann prospectors Unleash 10 Hernkyn Yaegirs, including a range of specialist operatives Includes a sheet of 38 tokens for use in games of Kill Team. This multipart plastic kit allows you to build 10 Hernkyn Yaegirs, brave prospectors of the Leagues of Votann. These miniatures can be used as Hernkyn Yaegirs operatives in games of Kill Team, or fielded with Leagues of Votann armies in games of Warhammer 40,000. This kit includes various weapons, heads, and accessories, allowing you to assemble a unique squad and build some as specialists for your Kill Team – such as the Riflekin, Bombast, Gunner, and more.Inside the box you will also find a set of 38 Hernkyn Yaegirs tokens, so you can easily keep track of your equipment and in-game effects in the heat of battle.This set comprises 151 plastic components and is supplied with 10x Citadel 28.5mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Available this one time, this very detailed resin character has 10 variant orange editions, "Pumpkin Spice". If you find a Pumpkin Spice Fishidious, turn the photo of it in with the serial number in the box to contact@para-bellum.com, and you will get one of the out of print, numbered Old Dominion Heavy Metal Founder's Exclusive models. And if you don't find Pumpkin Spice, you have a great halloween themed Fish Gnome to play the exclusive scenario with.  Step 1: Figure out humans hand out candy to their spawn for free on one glorious night of the year.  Step 2: Disguise self as aforementioned spawn. (Particular care required for mucus glands...humans are strange)    Step 3: Profit! (in the form of Candy! so double profit because one does not have to exchange for it later!) Box Contents ●   1 Resin Miniature●   1 Scenario Pack Booklet●   1 Fun Command Card Product Information ●   Assembly: Required.●   Material: Resin●   Scale: 38mm

Read more less

Three terror troops for your Tyranid hive fleet These horrifying creatures lay in wait until the perfect moment to strike Unleash a flurry of razor-sharp blows from mantis-like talons This multipart plastic kit builds three Von Ryan’s Leapers, terrifying Tyranid ambush-beasts. These creatures spring from hiding to shred their unsuspecting prey using whip-fast slashes from two pairs of razor-sharp talons – including powerful mantis-like arms resembling the larger Lictor bioform. Then they feast, with a revolting combination of fangs, mandibles, and feeder tendrils.This kit contains 29 plastic components, and comes with 3x Citadel 40mm Round Hex Hole Bases. These push-fit miniatures can be assembled without glue, and are supplied unpainted – we recommend using Citadel Colour paints.

Read more less

Box Contents ●    Dual Kit. Contains 12 Plastic Miniatures (Hold Thanes/Dragonslayers, with the option of making their respective command models)●    3 Plastic Infantry Stands●    12 Bases●    2 Command Cards Product Information ●    Assembly: Required.●    Box size: 30x15x6cm; 410g●    Material: Plastic●    Scale: 38mm, Miniature Height: 4.4cm   In Game Role ●    Battlefield Role: Heavy Infantry, Anti-Armor●    Class: Heavy●    Type: Infantry   Lore: Clad in armor forged in a bygone age when dragon fire was the greatest threat to a warrior, every vulnerable part of a Dragonslayer is covered in alloys not seen since the breaking of the world. The weapons they bear were those used by their Ancestors to pierce the nigh invulnerable hides of the Elder Dragons. Forged from adamantine and now quenched in dragon blood, no mortal armor could hope to withstand a blow. Dragonslayers are entrusted with the greatest heirlooms of their Hold, weapons that are part of the living memory of their people’s greatest trial and triumph. Only the greatest of Thanes could hope to aspire to the rank of Dragonslayer, and no single Dweghom, not even the eldest Mnemancers, has the standing to recommend the elevation of a Thane to their ranks: they must rather be chosen by the unanimous acclaim of their peers; their valor and prowess so indisputable that even the greatest of the Dweghom warriors would not contest their ascendance to this elite force. #conquest #dragonslayers #Hold Thanes #dweghom #dual #kit

Read more less

Heavily-armoured Elites for Chaos Space Marines and World Eaters armies Builds five Chaos Terminators, equally deadly at a distance or in close combat Customise your squad with a murderous array of ranged and melee weapons This multipart plastic kit builds a squad of five Chaos Terminators. Each of these hulking warriors is armed with a combi-bolter – two of which can be upgraded to combi-flamers, two into combi-meltas, and one into a combi-plasma gun – and a melee weapon for wading into close combat. The kit includes three power fists, one armour-splitting chainfist, and a variety of accursed weapons in the form of axes, blades, and a maul, as well as two lightning claws that can be worn separately or as a pair. It also offers a pair of heavy weapons to choose from – a heavy flamer, or a long-ranged reaper autocannon.In addition to its huge armoury, this massively customisable kit offers plenty of interchangeable and cosmetic options – including 10 different heads as well as separate trophy racks and shoulder pads.This kit comprises 82 plastic components and comes with 5x Citadel 40mm Round Bases, as well as 1x Chaos Space Marines Transfer Sheet featuring 364 Chaos symbols and Legion markings. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less