Tools all products

Blue Cement Glue for Plastic Models The glue for plastics, specially designed for model making and model kits, known as cement glue, is now available in a blue-coloured version. This adhesive retains all the effectiveness and strength of the original transparent version, with the additional advantage of a blue tint that clearly indicates the areas where the glue has been applied. This blue modelling glue comes in liquid form and is applied directly onto the surfaces intended to be joined. Its blue coloration provides excellent visual contrast, allowing precise identification of glue placement before it dries. This feature is particularly beneficial given the fast-drying properties typical of cement glues. With transparent versions, it can sometimes be difficult to see where the adhesive has been applied before it sets, making accurate placement challenging. Like the transparent variant, the blue cement glue works by partially melting the surfaces it contacts, creating a chemical "weld" between them. This chemical fusion results in a strong bond, free of visible joints, like metal welding. It is especially effective for materials commonly used in model-making, such as polystyrene, ABS, plasticard, and HIPS. Key advantages of using blue plastic glue include enhanced ease and accuracy during application due to the visibility of its colour, along with maintaining the bond strength, rapid drying time, and compatibility with a variety of modelling materials. This results in a cleaner, more professional finish, ensuring durable and seamless connections. As with transparent cement glues, it is essential to use the blue version in a well-ventilated area to avoid harmful inhalation caused by vapours released during the drying process. To achieve optimal bonding with blue cement glue, surfaces must be properly prepared. This includes thorough cleaning to remove any dirt or grease, lightly sanding to enhance adhesion, and precise application using a fine brush or needle. Firmly pressing and holding the parts together during drying ensures strong, bubble-free bonding. Any excess glue should be promptly removed to maintain a neat finish. Valid for the following types of materials: Polystyrene PE, ABS, and PVC. CONTENTS: 1x square glass jar with 40ml (bottle dimension 44x44x60mm)1x extra fine applicator brush

Read more less

Contact Glue 100ml Contact glue is a high-strength adhesive designed to bond a wide variety of materials such as leather, wood, EVA foam, rubber, metal, and certain types of plastic. It is especially valued for its ability to form strong, durable bonds almost instantly, without the need to hold the pieces together or wait for long drying times. Its versatility makes it ideal for both industrial applications and smaller projects, such as crafts and home repairs. Contact cement is an essential tool in the world of crafts and cosplay. It is frequently used to assemble pieces of EVA foam, fabrics, leather, and other flexible materials. For example, in cosplay, it is perfect for building armor, weapons, and accessories, as it offers a firm bond that withstands movement and wear and tear. In addition, its flexibility makes it an excellent choice for working with materials that need to maintain a certain elasticity. In creative projects, such as making costumes and personalized decorations, it guarantees professional and long-lasting results. Applying contact glue cement is simple, but requires attention to achieve an optimal result. First, the surfaces to be joined must be cleaned, removing any dirt, grease, or dust, as these can interfere with adhesion. Next, apply an even layer of adhesive to both surfaces using a brush, spatula, or suitable applicator. It is important to make sure that the entire area is covered to ensure a complete bond. After applying the adhesive, it is necessary to let it dry until it is sticky to the touch, which usually takes between 10 and 30 minutes, depending on the environmental conditions and the type of glue used. Once the surfaces are ready, they are carefully aligned and pressed firmly together. This step is crucial, as the union is immediate and does not allow for adjustments. To guarantee uniform adhesion, applying pressure with a roller or some other flat object is recommended. CONTENTS: 1x 100 ml

Read more less

Glow tape 10mm The self-adhesive photoluminescent tape also known as Glow in the Dark tape glows in the dark after absorbing natural or artificial light, emitting an intense glow in the dark without the need for batteries or electricity. Its luminous capacity makes it an indispensable tool for signage, security, and decoration in a wide variety of environments. It is increasingly used in modeling to create realistic luminous effects in dioramas, bases, and scenography. It is ideal for representing safety markers, emergency lights, or illuminated panels in science fiction, cyberpunk, and industrial-themed miniatures. It can also be applied to miniature vehicles, robots, or armor to simulate active light sources without the need for LEDs. Its flexibility allows it to be adapted to different scales and shapes, providing a striking and functional visual detail in any project. Thanks to its easy application and cutting, this glow tape can be attached to any smooth surface, such as walls, floors, stairs, railings, and personal objects. Its high-quality adhesive guarantees a long-lasting bond without risk of detachment. In addition, its flexible design allows it to be cut and adapted to any space or need. It is ideal for marking evacuation routes, emergency exits, and risk areas, offering an effective solution to improve safety in the event of power cuts or low-light situations. It is very easy to apply. Simply clean the surface where it is to be placed, cut it to the desired size, and stick it on, pressing firmly. To obtain maximum brightness, it is recommended to expose it to an intense light source for a few minutes before use. The greater the light load, the longer it will remain visible in the dark. Its photoluminescent effect is long-lasting and reusable, guaranteeing efficient and low-maintenance lighting. Contents: 10mm x 18m Warning: The normal color of this product is yellowish, but when exposed to natural light or charged with an ultraviolet flashlight the material glows in the dark.

Read more less

Clear Glue 45ml | Silicone glue for EVA foams, PLA plastic from 3D printing, Crafts, and Modeling What is Silicone Glue? This silicone glue - clear glue, known for its flexibility and transparency, is crafted from silicone polymers and used for creating strong bonds between various materials. It is particularly effective on PVC, resins, transparent plastics, plasticard, wood, PLA plastic from 3D printing, and EVA foam. Unlike sealants designed for filling gaps, this type of product focuses on bonding materials with precision and a clear finish. Its slower drying time compared to cyanoacrylate adhesives makes it a preferred choice for intricate or detailed projects, ensuring both durability and ease of use. It also excels in maintaining a clean, professional appearance, especially on clear surfaces. It is also excellent for bonding all types of clear plastics where a cyanoacrylate would create a whitish stain, e.g. bonding clear plastic miniature bases, aircraft cockpits, and weapon effects helping to maintain a clean and professional look. How to Remove Silicone Glue? To remove this type of adhesive, a careful approach is essential. Start by scraping away excess material using a non-abrasive tool like a plastic scraper. If the bond is particularly strong, applying a solvent such as isopropyl alcohol or acetone can help soften it. Once softened, gently rub the area with a cloth to lift any remaining residue. For delicate surfaces, consider testing the solvent on an inconspicuous spot to avoid potential damage. If necessary, specialized removers designed for this purpose can offer additional assistance in breaking down tougher residues. What is Silicone Glue Used For? This versatile bonding agent is widely used in craft, repair, 3D printing, and professional applications. It works effectively on PVC, resins, and clear plastics, as well as PLA plastic from 3D printers ensuring that surfaces retain their clarity without visible imperfections. In crafts, it is often used to glue EVA foam, felt, or cardboard in projects that require a clean, seamless finish. In the world of modeling and Warhammer board game miniatures, it is an excellent choice for creating dynamic effects such as splashes or slime in modeling projects. Unlike other adhesives, it does not discolor, making it ideal for transparent or decorative materials where precision is most important. How to Dissolve Silicone Glue? Breaking down this material requires a combination of patience and the right tools. Acetone is one of the most effective solvents, loosening the bond when applied sparingly and allowed to penetrate for a few minutes. For a gentler approach, warming the adhesive with a hairdryer can make it more pliable and easier to remove. Dedicated removers designed specifically for silicone-based products can also provide excellent results. When working with solvents or heat, always ensure proper ventilation and take care to protect the surrounding surfaces and materials. How to Add Drool and Saliva Effects to Your Miniatures Using Clear Glue? Adding drool and saliva effects to miniatures can elevate their realism, especially for creatures like monsters or aliens. Using a transparent adhesive like Clear Glue ensures a perfect glossy finish for this purpose. Here’s a step-by-step guide to achieving these effects. Prepare Your Tools and Materials: Gather your materials: the adhesive, a toothpick or fine applicator, tweezers, and a small paintbrush. These tools will help you work precisely and ensure a realistic outcome. Visualize the Effect: Decide on the placement and style of the drool or saliva. For instance, you might create a thin strand between teeth or dripping saliva from a tongue. Imagining the final look helps with placement and proportions during application. Apply the Adhesive: Using the toothpick or fine applicator, place a small amount of adhesive where the drool or saliva should begin. Stretch it between two points, such as between fangs, to create strands. The product’s transparent and viscous nature makes it ideal for forming realistic shapes. Shape and refine: While the adhesive is still flexible, use tweezers or a small paintbrush to adjust the strands, curves, or drops to mimic the natural flow of saliva. This step is key to achieving a realistic look. Allow the material to harden completely: Depending on the thickness, this may take a few hours. Finishing touches: Enhance the effect by brushing on a gloss varnish for a wet look or change its color by adding a blood effect paint. These details add depth and realism to the finished piece. CONTENT: 1x 45ml

Read more less

Hobby Paint Shaker  The GSW Paint Shaker Machine is a practical and compact tool for stirring paint cans. Its simple design makes it easy to use and store, while the built-in suction cups allow for secure attachment to smooth surfaces. With this paint shaker, the paint mixing process is quick and hassle-free, allowing you to focus on the important work. Its design is not original to our brand, but its motor and internal components have been modified to improve the lifespan of this modeling tool and reduce noise generation during use. The device is designed to thoroughly mix the paint cans, ensuring that the components inside are well blended to obtain a smooth and uniform consistency. It is compatible with various types of paint, such as acrylic, lacquer, enamel, oil, and latex, regardless of the type of bottle. It can be used with a wide variety of paint bottles such as 10 ml, 12 ml Citadel, 17 ml standard dropper, 24 ml Citadel, 22 ml, 30 ml, and 60 ml, making it ideal for virtually all paints from any modeling paint manufacturer, regardless of shape or size. Technical specifications - Input power: 100-240v- Output power: 6V (3W)- Net weight 140gr./set + AC/DC adapter- Rotating speed: 3.200r/m- Frecuency:50/60Hz- Sound: 40/45 dB- Charging method: UE-plug- Cable length: 2 meters Content:  1x Paint shaker3x spare rubber bands Remarks:- Bottles should always be closed properly to prevent leaks.- The time of use should not exceed 15' continuously, and you should let it rest for 5' before using it again, otherwise it could damage the motor.- The mixing process can be improved by adding a mixing ball to your model paints.- This tool is not a toy

Read more less

Precision tips for cyanoacrylate bottles Precision tips are special attachments that can be added to the nozzle of a cyanoacrylate instant glue bottle to allow for a more precise application of the Cyanoacrylate glue. These tips are designed to give you greater control over the amount and location of the adhesive you apply, making it easier to use the CA-glue for delicate or intricate projects. GSW precision tips have an extra fine needle-like point that can be used to apply small amounts of adhesive to specific areas. They are made of plastic and are sold as separate accessories that can be attached to the nozzle of your bottle. Using them can help you achieve a cleaner, more professional-looking result, especially when working with small or intricate pieces. They can also help you save adhesive liquid or gel by allowing you to apply it only where it is needed, rather than having it spread out and potentially ruin your project. This set of 20x precision tips will allow you to dose the cyanoacrylate in controlled quantities while protecting the original nozzle of the CA bottle. How to use precision tips for cyanoacrylate bottles After attaching a precision tip you can leave it on in position, without having to close the glue bottle for weeks, as air will not be able to enter through the tip thus favoring its conservation. Make sure they are fitted tight on your Cyano bottles. Press the tip on with some pressure, so that it seats very tightly. Most CA adhesive bottles will accept these tips, but to be 100% sure, use ours. If the glue is not needed for a long period of time, we recommend preparing the bottle for storage. Remove the used tip, clean the nozzle and the neck of the bottle, and replace the cap with its original cap. Using these for cyanoacrylate bottles can make it easier to apply the hobby adhesive accurately and with greater control. They can be especially helpful when working with small or delicate objects or in hard-to-reach areas. Just be sure to follow proper safety procedures, such as using gloves and working in a well-ventilated area, to avoid any accidental contact with the glue.

Read more less

Plastic Cement Glue for modeling Plastic Cement Glue for modeling The glue for plastics, specially designed for model making and model kits, is known as cement glue. This type of adhesive is the most effective for bonding plastic materials since its formula allows to fuse the surfaces chemically, creating a strong and durable bond. This adhesive for modeling plastics comes in liquid form and is applied to the surfaces to be joined. When it acts, the glue partially melts the parts to be joined, generating a kind of “welding” between them. This chemical process allows the pieces to fuse, resulting in a finish without visible joints and a stronger connection, similar to what occurs in metal welding. This makes it ideal for working with materials such as polystyrene, ABS, plasticard, and HIPS, which are common in model-making and model kits. Among the main advantages of using plastic glue are the strength of the bond, which ensures the durability of the assembly, fast drying, and compatibility with different types of materials. In addition, the chemical welding action eliminates visible seams, resulting in a cleaner, more professional finish. However, due to the release of vapors during the process, it is essential to use this product in a well-ventilated area to avoid harmful inhalation. The choice of the best adhesive for modeling plastics depends on the type of material and intended use. There are several options, each with particular characteristics. For example, cyanoacrylate, known as instant glue, offers fast and strong adhesion, although it tends to be brittle in certain applications. Epoxy resin, on the other hand, is a popular choice thanks to its high structural strength and versatility for different materials, although it requires mixing before application. The polyurethane version is ideal for materials that need flexibility, while solvent-based versions, such as acetone, work well by chemically melting the surface of certain materials. Cement glue is considered the strongest adhesive for bonding plastics, as its solvent welding process creates an extremely strong seamless bond. This adhesive penetrates by fusing the parts at the molecular level, resulting in a unified and very durable assembly. Unlike other adhesives that only adhere superficially, tile adhesive is integrated with the material, providing greater resistance to stresses and environmental factors. To achieve a good bond with adhesives for plastics, it is important to properly prepare the surfaces. This involves cleaning them to remove dirt or grease, lightly roughening them with sandpaper to improve adhesion, and applying the product precisely with a fine brush or needle. Pressing the parts firmly together and holding them in place while the adhesive dries ensures a bond without air pockets and with greater strength. Any excess or leftovers should be wiped off immediately to maintain a clean finish. Valid for the following types of materials: Polystyrene PE, ABS, methacrylate, and PVC. CONTENTS: 1x square glass jar with 40ml (bottle dimension 44x44x60mm)1x extra fine applicator brush

Read more less

Refillable markers 0.5 This pack of refillable markers is a reliable choice for a wide range of uses, such as crafts, drawing or professional projects. Each marker is designed with a refillable reservoir that makes it easy to reuse by adding a wide range of inks or paints.  These markers work well on various surfaces depending on the type of paint and its dilution: paper, plastic, glass, wood and more, making them versatile for different tasks such as painting comics or manga-style figures. For best results, it is recommended to use them with acrylic inks or chrome paints, which provide vibrant, opaque, and smooth coverage, and generally, due to their fluidity, do not need prior preparation. Their durable construction ensures consistent performance, and their ergonomic design allows for comfortable use during prolonged sessions. This set includes refillable paint pens with precision tips of 0.5mm, suitable for detailed lines and precise applications. Content: 6x

Read more less

Refillable markers 0.7 This pack of refillable markers is a reliable choice for a wide range of uses, such as crafts, drawing or professional projects. Each marker is designed with a refillable reservoir that makes it easy to reuse by adding a wide range of inks or paints.  These markers work well on various surfaces depending on the type of paint and its dilution: paper, plastic, glass, wood and more, making them versatile for different tasks such as painting comics or manga-style figures. For best results, it is recommended to use them with acrylic inks or chrome paints, which provide vibrant, opaque, and smooth coverage, and generally, due to their fluidity, do not need prior preparation. Their durable construction ensures consistent performance, and their ergonomic design allows for comfortable use during prolonged sessions. This set includes refillable paint pens with precision tips of 0.7mm, suitable for detailed lines and precise applications. Content: 6x

Read more less

Hot Glue Sticks for glue gun are made from a thermoplastic material designed to be melted in hot glue guns. When heated, the glue stick turns into a liquid form, allowing it to be applied easily to various surfaces. As it cools, the glue solidifies, creating a strong bond between the materials being joined. They are the perfect solution for all your crafting, DIY, and repair needs and they are designed to fit most standard hot glue guns, ensuring a smooth and reliable flow for quick and durable adhesion on various materials such as fabric, plasticard, wood, ceramics, metal, foams, cork, and more. Available in both transparent and black, they offer versatile options depending on the nature of your project. Transparent color: they are ideal for general use, allowing for discreet bonding without leaving visible marks. Whether you're working on crafts, home decor, or repairs, the clear adhesive blends seamlessly into your materials, providing a strong hold while maintaining the appearance of your project. Black color: they are perfect for tasks where you want the adhesive to either blend into dark materials or stand out as part of your design. They’re a popular choice for cosplay, electronics, automotive repairs, and any creative project that involves darker color schemes. They provide a clean, and polished look for professional results, making it a favorite for artists, designers, and hobbyists alike. These glue sticks heat up quickly and bond strongly, providing a fast-setting adhesive that ensures your projects stay in place. Perfect for beginners and experts, these hot glue sticks are non-toxic and safe to use with proper handling. Each pack contains 30x hot glue sticks 11mm in diameter and 190 mm in length offering excellent value for money. Whether you're fixing, crafting, or creating, these are the ideal tool to help bring your ideas to life!

Read more less

Hot Glue Sticks for glue gun are made from a thermoplastic material designed to be melted in hot glue guns. When heated, the glue stick turns into a liquid form, allowing it to be applied easily to various surfaces. As it cools, the glue solidifies, creating a strong bond between the materials being joined. They are the perfect solution for all your crafting, DIY, and repair needs and they are designed to fit most standard hot glue guns, ensuring a smooth and reliable flow for quick and durable adhesion on various materials such as fabric, plasticard, wood, ceramics, metal, foams, cork, and more. Available in both transparent and black, they offer versatile options depending on the nature of your project. Transparent color: they are ideal for general use, allowing for discreet bonding without leaving visible marks. Whether you're working on crafts, home decor, or repairs, the clear adhesive blends seamlessly into your materials, providing a strong hold while maintaining the appearance of your project. Black color: they are perfect for tasks where you want the adhesive to either blend into dark materials or stand out as part of your design. They’re a popular choice for cosplay, electronics, automotive repairs, and any creative project that involves darker color schemes. They provide a clean, and polished look for professional results, making it a favorite for artists, designers, and hobbyists alike. These glue sticks heat up quickly and bond strongly, providing a fast-setting adhesive that ensures your projects stay in place. Perfect for beginners and experts, these hot glue sticks are non-toxic and safe to use with proper handling. Each pack contains 30x hot glue sticks 11mm in diameter and 190 mm in length offering excellent value for money. Whether you're fixing, crafting, or creating, these are the ideal tool to help bring your ideas to life!

Read more less

What is a Glue Gun? The GSW Hot Glue Gun is an incredibly versatile and efficient hobby tool, specially designed to meet the needs of crafters, DIY enthusiasts, and professionals alike. This powerful device offers precision in bonding and fastening various materials such as fabric, plasticard, wood, ceramics, metal, foams, cork, and more, quickly and securely. Ideal for craft and repair projects, it ensures seamless operation with a lightweight, ergonomic design that minimizes user fatigue while maximizing productivity. It’s compatible with 11mm glue Sticks for glue gun and offers adjustable power settings ranging from 120W to 150W. With the ability to reach temperatures between 100°C to 220°C, this tool can be adapted to a wide range of materials, making it highly versatile. The GSW model also includes a fast-heating system, ensuring that it is ready for use in just minutes. Whether you're working on small crafts or complex repairs, it will help you get the job done efficiently and precisely. A glue gun is a tool that uses heat to melt a cylindrical adhesive stick, which then flows out in liquid form. The melted adhesive bonds different surfaces and materials quickly and securely as it cools and hardens. These tools are commonly used in a variety of applications, including arts and crafts, DIY repairs, packaging, and even professional construction projects. The adhesive can stick to a wide range of materials such as wood, plastic, metal, fabric, ceramics, and more. It is ideal for any project that requires fast and effective joining of materials. With an adjustable temperature setting, the GSW model can handle delicate as well as sturdy materials, making it one of the most versatile tools available for both beginners and experts. How to Use a Hot Melt Gun? Using a hot melt gun is straightforward, but there are a few important steps to ensure safety and the best results. Here’s a step-by-step guide: Preparation: Make sure the device is unplugged before you begin. Insert an 11mm adhesive stick into the slot located at the back of the device. Ensure that it is seated properly. Place the device on its stand so it remains stable while heating. Power and Heating: Plug the device into a power source and switch it on. If your model has an adjustable power setting, choose the appropriate one based on your project. Lower temperatures are better for delicate materials like paper or fabric, while higher temperatures work well for tougher materials such as wood and metal. Wait for a few minutes (usually around 3 to 5) for the device to heat up. Most models have a small indicator light to show when they are ready for use. Application: Once it’s heated, gently squeeze the trigger to release the melted adhesive onto the surface of your project. You can apply it directly to the material or in small dots depending on how much you need. Move the device slowly and steadily to ensure even distribution of the adhesive. For larger or heavier projects, apply more adhesive to ensure a secure bond. Bonding the Materials: Once the adhesive is applied, press the materials together firmly. The adhesive cools quickly, so you’ll have to act fast. Hold the materials in place for a few seconds to ensure a strong bond. If needed, you can use clamps or weights to hold the materials until the adhesive fully hardens. Resting the Device: After applying the adhesive, always rest the tool on its stand to avoid spills or accidental burns. If you are done using it, make sure to unplug it and allow it to cool down completely before storing it. What is the best hot glue gun? When it comes to choosing the best hot melt applicator, the Green Stuff World (GSW) Hot Glue Gun stands out as a top contender due to its innovative features designed for both safety and efficiency. This tool is highly regarded not only for its powerful bonding capabilities but also for the attention to detail in its design, which ensures ease of use, precision, and safety. Key Features that Make the GSW Hot Glue Gun the Best Choice: Brass Nozzle for Backflow Prevention One of the standout features of the GSW model is its brass nozzle, which is specifically designed to prevent backflow. This is a crucial innovation for anyone who has experienced the frustration of melted adhesive leaking or oozing out of a tool uncontrollably. The brass material is highly durable and heat-resistant, ensuring that the adhesive flows smoothly while preventing any messy backflow, even during extended use. This feature significantly enhances the precision and cleanliness of the tool, making it perfect for delicate crafting projects or precise repairs. Safety Stand Support Safety is a top priority when working with a tool that involves high temperatures, and the GSW applicator addresses this concern with its safety stand support. This sturdy stand allows you to rest the device securely between uses, minimizing the risk of accidental burns or damage to your workspace. The stand keeps the heated nozzle elevated, preventing it from coming into contact with surfaces, which could cause potential hazards. It’s an essential feature for maintaining a safe working environment, especially in busy workshops or home studios. Ergonomic Trigger for Comfort Another reason the GSW model is highly recommended is its ergonomic trigger. Unlike standard models that may cause hand fatigue during extended use, this applicator has a trigger designed to fit comfortably in your hand. This reduces strain, allowing you to work for longer periods without discomfort. The ergonomic design makes the GSW model a great option for professionals who use this tool for hours at a time, as well as for hobbyists who want a comfortable, user-friendly experience. Adjustable Temperature for Versatility The adjustable temperature control is a feature that sets the GSW applicator apart from many others on the market. With the ability to adjust the temperature from 100°C to 220°C, this model allows you to tailor the heat output depending on the material you’re working with. Lower temperatures are ideal for delicate projects involving materials like fabric, foam, or lightweight plastics, while higher temperatures provide the necessary heat for tougher materials like wood, metal, or ceramics. This versatility makes the GSW model suitable for a wide range of applications, from crafting and DIY repairs to more robust construction tasks. Consistent Performance and Fast Heating In addition to these specialized features, the GSW model offers consistent performance thanks to its high-power output of 120W to 150W. It heats up quickly, meaning you can get started on your projects in just a few minutes. The fast heating system ensures that you won’t waste time waiting for the tool to reach its optimal temperature, making it an efficient choice for both small and large projects. if you're looking for the best hot melt applicator on the market, the Green Stuff World Hot Glue Gun is a top-tier option. Its advanced features ensure not only high-quality results but also enhance the overall user experience, making your crafting, DIY, or repair projects smoother and more enjoyable. How to remove hot gun glue​? Removing hardened adhesive may seem tricky, but it can be done with the right approach. Here’s how to safely remove it: From Non-Porous Surfaces: For materials like glass, metal, or ceramics, you can usually peel off the adhesive once it has fully hardened. If it doesn’t come off easily, try applying rubbing alcohol or acetone to soften it before peeling. Be careful not to scratch the surface as you remove the adhesive. From Fabric or Other Delicate Materials: If adhesive gets on the fabric, wait for it to harden, then place the fabric in the freezer for about 30 minutes. The cold will harden the adhesive further, making it easier to peel off. For more stubborn spots, you can try using an iron. Place a piece of wax paper over the adhesive and run the iron over it on a low setting. The heat will soften the adhesive, and it will stick to the wax paper, pulling it away from the fabric. Using Heat: In some cases, you can reheat the adhesive using the same device you used to apply it. Hold the device a few inches away from the hardened adhesive to soften it, then scrape it off carefully with a blunt object like a butter knife or spatula. Just make sure the material you're working with can withstand the heat. Specialized Removal Tools: There are also adhesive removal tools available, which can help scrape away the adhesive without damaging the underlying surface. How to treat a hot glue gun burn​? Burns are a potential hazard when working with a high-temperature device like this, so it’s important to know how to treat them. Here’s what you should do if you accidentally burn yourself: Immediate Cooling: The first thing to do when you get burned is to cool the area immediately. Run cold water over the affected area for 10 to 15 minutes. Avoid using ice directly on the burn, as it can cause additional damage to the skin. If the adhesive is still on your skin, do not attempt to peel it off right away. Continue to flush the area with cold water until the adhesive solidifies, and then gently peel it off. Avoiding Further Damage: After the burn has cooled down, avoid touching or applying pressure to the area, as this can cause further damage. If the burn is severe or involves blistering, seek medical attention. Using Burn Cream: For minor burns, applying a burn cream or ointment can help soothe the area and promote healing. Aloe vera is also an excellent natural remedy for burns. It reduces pain and helps the skin recover more quickly. Protecting the Burn: After treating the burn, cover the area with a sterile bandage or dressing. This will help prevent infection and keep the burn clean. Change the dressing regularly, and keep an eye on the wound for any signs of infection such as increased redness, swelling, or pus. Seeking Medical Attention: If the burn is large, severe, or located on sensitive areas like the face, hands, or joints, it’s important to seek medical attention right away. Safety Considerations When using any tool that involves heat, safety is of the utmost importance. The GSW model includes several built-in safety features such as automatic temperature control to prevent overheating. However, it’s still essential to take precautions: Always Rest on the Stand: When not actively using the tool, always rest it on its stand to prevent accidental burns or spills. Unplug When Not in Use: After completing your project, be sure to unplug the device and allow it to cool down before storing it. Work in a Well-Ventilated Area: While most adhesive sticks are non-toxic, it’s still a good idea to work in a well-ventilated area to avoid inhaling any fumes. Keep Out of Reach of Children: Ensure that this tool is kept away from children and pets to prevent accidental burns or injuries.

Read more less

Heat gun 450w A Hot Air Gun, also referred to as a Heat Gun, is a highly versatile hobby tool designed to blow heated air at controlled temperatures. It is widely used in various fields, including crafts, cosplay, and industrial settings, due to its ability to apply heat precisely to a wide range of materials.  The core structure of a Hot Air Gun includes a nozzle, a heating element, and an internal fan. The fan propels air across the heating element, which then exits the nozzle as a stream of hot air gets directly to specific areas with considerable accuracy. In crafting, this tool is indispensable. It is frequently utilized for shrinking plastic films or tubing applied to wires or other objects, which then contract tightly around them with the application of warmth. This method is common in electrical work, where shrink tubing is used to insulate and protect wires. Additionally, this tool can be used to dry paints, glues, and other adhesives more rapidly than would be possible with air drying alone. This function is particularly useful in craft projects where time is a factor or when multiple layers of material need to be dried quickly. In paper crafting, thermal tools are often employed for embossing, a technique where warmth is applied to embossing powder to create raised, textured designs on paper. This application is popular in making greeting cards, invitations, and other decorative items. In the realm of cosplay, they are equally essential. Cosplayers frequently work with materials like Worbla and EVA foam, both of which are thermoplastics that can be shaped when heated. A Hot Air Gun allows cosplayers to warm these materials until they become pliable, enabling them to mold and shape the material into intricate costume pieces, armor, and props. The ability to control its temperature is crucial in these applications, as overheating can cause damage to the materials, while insufficient warmth may not soften them adequately. They are also used in cosplay to cure paints more quickly. Once a costume or prop has been painted, applying warm can speed up the drying process, making it easier to apply additional layers or move on to other stages of the project. This is particularly helpful in situations where multiple coats of paint are necessary to achieve the desired effect. Another important use of thermal tools in cosplay is for activating heat-sensitive adhesives. Some adhesives are designed to bond more effectively when exposed to warmth, and this tool provides the precise level of warmth needed to activate these adhesives without causing damage to the surrounding materials. This precision is crucial in creating high-quality cosplay pieces, where the durability and appearance of the final product are of utmost importance. This tool offers two-speed settings, allowing selection between two specific temperatures: 280ºC and 450ºC. This allows users to choose the ideal power level for their specific task, which is crucial, as different materials require different temperatures to achieve the desired effect.  In addition, each mode features variable airflow settings, allowing control over the rate at which the high temperature is expelled: 150L/m or 200L/m. This feature is especially useful for directing heat more precisely or dispersing it over a wider area, depending on the needs of the project. Features: Overheat protection: The power of this heat gun will automatically cut off after 15 minutes of overheating. Built-in stand: It can be self-support and tabletop use, simple, and safe. Long Cable: A 2 m long cable helps you to use this thermal gun in large areas more conveniently. There are two powers: Mode I 280ºC (536ºF), 150L/m · Mode II 450ºC (842ºF), 200L/m. Quick temperature dissipation: Multiple vents can speed up dissipation. Ergonomic design: The shape and non-slip design make the heat gun comfortable to hold in hand. Versatile application: Wide use and perfect for DIY projects. EU plug Content: 1x Hot air machine (2 meters of cable)1x Metal instrument for heating parallel parts

Read more less

Compass circle cutter A compass cutter, also called a compass circle cutter, is a versatile tool designed for creating precise circular shapes in various materials. This compass circle cutter merges the traditional function of a compass, commonly used for drawing circles, with a cutting mechanism, enabling users to produce perfectly shaped circular cuts with ease. It’s especially valuable in a range of creative and practical applications, including cosplay crafts, where precision and consistency are crucial. With a simple and effective design, It consists of a central pivot point, an adjustable arm, and a cutting blade. The central pivot acts as an anchor, marking the center of the desired shape. From this pivot, an adjustable arm extends, allowing the user to modify the radius based on the desired diameter. At the end of this arm, a sharp blade is attached, and it is responsible for the actual cutting.  The variety of materials that can be cut with this compass cutter is extensive, and commonly, it’s used on cosplay foams, plasticard sheets, styrene plastic sheets, cardboard, films, light wood, or paper. This versatility makes it indispensable in various fields, including arts and crafts, graphic design, model making, and notably, cosplay crafts.  Using a compass circle cutter properly involves a straightforward process that requires a steady hand and attention to detail. The user places the pivot point at the center of the desired circular shape, adjusts the arm to the correct radius, and then rotates the tool around the pivot. This action allows the blade to cut out the shape cleanly and consistently, achieving results that are difficult to replicate by freehand cutting, particularly in the precise work required in cosplay. In addition to its applications in cosplay for creating costume elements such as many sorts of accessories for armor, shields, and decorative embellishments, the tool is also widely used in other creative fields. Graphic designers employ it to cut out logos, labels, and design elements from various materials. Model makers rely on it for crafting precise shapes needed to build accurate replicas. In more industrial settings, a heavy-duty version might be used to cut gaskets, seals, and other components that require high precision and uniformity. These industrial-grade tools are typically constructed from more durable materials, allowing them to handle thicker, tougher materials than those used in craft and cosplay work. Proper maintenance is essential to ensure the longevity and continued precision of this tool. The blade should be kept sharp to make clean cuts and avoid damaging the material. If the blade becomes dull, it should be replaced or sharpened according to the manufacturer's guidelines. The pivot point, which is often a sharp, needle-like tip, should also be kept in good condition to prevent slipping, which could result in an imperfect cut. Cleaning the tool after each use is also important, especially when working with materials like vinyl or adhesive-backed paper, which can leave residues on the blade. Storing the tool in a protective case when not in use can help prevent accidental damage and maintain its precision over time. It is equipped with multiple blades and pencil leads and includes a safety cover for the blade, minimizing the risk of accidental injury when the tool is not in use. This set contains:- Compass cutter- 3x replacement blades- 2x replacement pencil leads 

Read more less

Wooden craft tools Wooden Modeling Tools for modeling clay, soft materials, and thermoplastics are essential sculpting tools for working and manipulating polymer clay, plasticine, epoxy putty, and other thermoplastic or cosplay materials such as Worbla. These wooden craft tools are valued for their durability, lightweight, and the smoothness with which they interact with the materials being modeled, making them ideal for a wide variety of artistic applications. One of the most notable features of these hobby tools is that they each have two tips, giving them added versatility and functionality. This dual tip allows artists and modelers to switch between different functions without having to change wooden modeling tools, optimizing workflow and improving modeling accuracy. Each end can have different shapes, such as flat, rounded, tapered, or hooked tips, offering a variety of options for sculpting, detailing, and shaping materials. This set is used for shaping, sculpting, and detailing surfaces in a variety of creative projects. Wood, being a naturally soft and light material, allows for precise and careful handling of materials without damaging them or leaving unwanted marks. Their versatility makes them ideal for working on both large surfaces and fine details, adapting to the specific needs of the project at hand. In polymer clay modeling, they allow the user to mold texture and smooth edges, create patterns, and shape the contours of a part. In the case of epoxy putties and other thermoplastic materials such as Worbla, wooden craft tools facilitate manipulation while the material is hot and moldable, helping to achieve desired shapes before the material cools and hardens. Cleanliness is essential to ensure durability and performance. The process would be as follows: Immediate cleaning after use: it is important to clean everything right after use, especially before the material dries and adheres to the surface. Use a damp cloth or sponge to remove any visible residue of clay, epoxy putty or other materials. Using warm, soapy water: If debris is more adherent, soak implements in warm water with a little mild soap. Gently scrub with a soft bristle brush to remove any material. Avoid soaking for too long to prevent the wood from swelling or warping. Proper drying: After washing, it is crucial to dry them completely. Use a dry cloth to remove most of the water and then let them air dry in a well-ventilated area. Make sure they are completely dry before storing them to prevent the wood from cracking. Cleaning of hardened materials: If there are dry remnants of material, you can use a knife or metal spatula to carefully scrape them off. Be careful not to damage the wood surface during this process. Fine-grit sandpaper can also be used to remove debris without affecting the texture of the implements. Periodic maintenance: To prolong the life of these accessories, it is advisable to apply a little mineral or linseed oil to them from time to time. This helps to keep the wood hydrated, preventing it from drying and cracking. Material: WoodMeasures: 14.8 cm - 15.5 cm lengthQuantity: x5

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

The GSW Army Transport Backpack is the backpack version of our Army Transport Bag specifically designed to protect your figures during transport. It can be used on your back, or simply as a travel bag with a cross strap to carry it on your shoulder. The GSW miniatures transport backpack is an essential accessory for wargame players and miniatures collectors. This product stands out for combining functionality, durability, and comfort, providing an optimal solution for transporting and protecting delicate miniatures during travel and relocation. The backpack is made of Oxford fabric, known for its lightness and resistance, which makes it ideal to withstand frequent use and adverse transport conditions. In addition, its padding ensures additional protection against impacts and falls, guaranteeing that the miniatures arrive in perfect condition at their destination. With a capacity to carry more than 200 figures, this backpack is perfect for those who need to carry a large number of miniatures to tournaments, gaming sessions or exhibitions. The miniatures are distributed among four levels, allowing for efficient and accessible organization. This storage system is complemented by removable metalized trays, which make it easy to arrange and access miniatures. The MDF trays have an adhesive metal coating which provides a stable and secure base for the magnetized figures. The backpack includes four trays, as well as 21 adjustable heights, allowing the internal space to be customized according to the specific needs of each user and the size of the miniatures. To ensure the integrity of the backpack and the safety of its contents, the GSW includes a reinforced MDF cabinet. This internal structure provides rigidity and durability, protecting the miniatures from possible crushing or deformation during transport. In addition, the GSW backpack is designed to be extremely versatile in terms of transportation. It can be used as a traditional backpack, carrying it comfortably on the back, or as a travel bag, using a crossbody strap to carry it over one shoulder. Comfort of use is another outstanding feature of this backpack. In addition to its capacity and strength, the GSW is equipped with a long shoulder strap and a top handle, elements that are designed to provide comfortable handling. These details allow the backpack to be lifted and carried with ease, even when fully loaded. For those who need additional space, the GSW backpack offers a modification option. It is possible to remove the first lower removable tray and glue the metalized rubber directly to the base of the drawer. This process involves trimming the rubber with scissors to fit snugly into the base structure. By doing this, the lower level is no longer removable, but you gain a few extra inches of internal space, which can be crucial for carrying larger miniatures or additional accessories. As for its dimensions, the backpack measures 45x30x18 cm, making it compact and easy to handle. Its total weight is 3.2 kg, which makes it light considering its carrying capacity and level of protection. Assembly instructions are included inside the backpack, providing detailed guidance for the correct placement and adjustment of the trays. This ensures that users can set up their backpacks efficiently and safely, making the most of the available space. Includes: 1x Warhammer backpack 1x Complete cabinet 4x Trays +4x adhesive metallized rubber sheet Warning: This carrying case must protect your wargame armies, so it is absolutely necessary to reinforce the assembly with PVA glue.

Read more less

Miniature bases with Skill Rings 40 mm Enhance your Blood Bowl and fantasy football games with our complete pack of 10 versatile Blood Bowl Bases and 100 colored skill rings to represent all possible equipment options. They have been designed to accommodate up to 4 different skill rings per miniature. These bases feature fittings that allow for quick and easy exchange of skill rings between games or even during play. Our innovative system includes nine different interchangeable skill rings, allowing you to add both functionality and visual flair to your game. By mixing and matching various colors, you can give your miniatures a vibrant and engaging look. Whether you're playing a casual match with friends or competing in a league, this basing system will elevate your gameplay experience. The 32mm are perfect for standard player models, such as linemen, throwers, catchers, and blitzers. These core players fit well on the standard-sized squares of the game board. In contrast, the 40mm are designed for larger models, like Ogres, Trolls, Minotaurs, and Treemen. The larger ones provide stability for bigger figures and help distinguish them from regular players, enhancing both gameplay clarity and visual distinction. Additionally, this product includes two pre-drilled holes to fit 5x2mm magnets, or you can glue other sizes directly onto the inner supports. These neodymium magnets offer two key benefits: Magnetize Your Miniatures for Easy Transport: Secure your miniatures in a miniature carry case with ease. Interchangeable skill rings: Use the same Blood Bowl bases with skill rings on different miniatures without needing to change all the bases. Simply attach a coin or piece of metal to the miniature, allowing the neodymium magnet to hold it securely on the new base, making it easily interchangeable. Upgrade your Blood Bowl and fantasy football games with our 10-pack of versatile bases + 100 colored skill rings, designed for both functionality and aesthetic appeal. Content: x10 miniature bases 40mm (thickness 5mm) x20 Black arches x10 Red arches x10 Blue arches x10 Yellow arches x10 White arches x10 Grey arches x10 Green arches x10 Orange arches x10 Purple arches

Read more less

Miniature bases with Skill Rings 32 mm Enhance your Blood Bowl and fantasy football games with our complete pack of 10 versatile Blood Bowl Bases and 100 colored skill rings to represent all possible equipment options. They have been designed to accommodate up to 4 different skill rings per miniature. These bases feature fittings that allow for quick and easy exchange of skill rings between games or even during play. Our innovative system includes nine different interchangeable skill rings, allowing you to add both functionality and visual flair to your game. By mixing and matching various colors, you can give your miniatures a vibrant and engaging look. Whether you're playing a casual match with friends or competing in a league, this basing system will elevate your gameplay experience. The 32mm are perfect for standard player models, such as linemen, throwers, catchers, and blitzers. These core players fit well on the standard-sized squares of the game board. In contrast, the 40mm are designed for larger models, like Ogres, Trolls, Minotaurs, and Treemen. The larger ones provide stability for bigger figures and help distinguish them from regular players, enhancing both gameplay clarity and visual distinction. Additionally, this product includes two pre-drilled holes to fit 5x2mm magnets, or you can glue other sizes directly onto the inner supports. These neodymium magnets offer two key benefits: Magnetize Your Miniatures for Easy Transport: Secure your miniatures in a miniature carry case with ease. Interchangeable skill rings: Use the same Blood Bowl bases with skill rings on different miniatures without needing to change all the bases. Simply attach a coin or piece of metal to the miniature, allowing the neodymium magnet to hold it securely on the new base, making it easily interchangeable. Upgrade your Blood Bowl and fantasy football games with our 10-pack of versatile bases + 100 colored skill rings, designed for both functionality and aesthetic appeal. Content: x10 miniature bases 32mm (thickness 5mm) x20 Black arches x10 Red arches x10 Blue arches x10 Yellow arches x10 White arches x10 Grey arches x10 Green arches x10 Orange arches x10 Purple arches

Read more less

Photo etch bending pliers Every modeler's toolkit must include high-quality photo etch bending tools, especially for handling delicate photoetched parts. These bending pliers feature completely flat tips, specifically designed to avoid damaging or marking the photoetched parts for scale models when they want to bend a part. They can also be of great help when working with plasticard. They are designed to help you achieve the highest level of craftsmanship possible. By providing a secure grip, precise control, and the ability to make clean bends without damage, they allow you to work with confidence and precision. Whether you’re building a detailed model from scratch or enhancing a pre-made kit, they are an essential addition to your workbench. Invest in quality hobby tools and elevate your modeling projects to new heights with this indispensable tool. **Photo etch means a flat, smooth surface of the pliers that leaves no traces of holding, bending or strain on any surface! Really usefull tool where people tell us the text does not do credit to its smooth pliers** Total length: 124cmLength of the tips: 26cmWeight: 64g.

Read more less

Corners for Modular Movement Trays Pack of extra corners specifically designed to enhance the functionality of GSW modular movement trays, ensuring that your units remain organized and stable during gameplay. Crafted from durable polystyrene plastic (PS), these corners offer a robust solution for constructing customized trays that can withstand the rigors of intense battles.  This product is highly customizable thanks to the wide variety of sizes and their sturdy construction. They can be easily cut to the exact size needed using a hobby knife, allowing you to tailor your movement trays to fit various unit types, whether monstrous infantry, swift cavalry, or disciplined regular infantry.  The assembly process is straightforward, with the corners designed to be glued using either Cyanoacrylate Glue, Cement Glue, or most glues for plastics, providing a strong and lasting bond. This makes it easy to quickly assemble or modify your movement trays as needed, enabling you to maintain the cohesion and organization of your units during play.  Thickness compatibility: 3mm Content:  8x short corner (15mm) 4x long corner pieces (25mm) 18x short straight pieces (25mm) 14x long straight pieces (75mm) #corners # movement #tray #greenstuffworld

Read more less

Hollow Plastic Bases 40 to 50mm Green Stuff World's Hollow Plastic Bases offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections.  They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as 40 to 50mm base adapters. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. Contains 5x Base Adapters 40 to 50mm. Compatible with Warhammer the Old World

Read more less

Hollow Plastic Bases 25 to 30mm Green Stuff World's Hollow Plastic Bases offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections.  They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as 25 to 30mm base adapters. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. Contains 20x Base Adapters 25 to 30mm. Compatible with Warhammer the Old World

Read more less

Stainless Steel RULER  30cm - 12 inches double faced - quality hobby tool.   - clear black markings in millimeter/centimeter & in inches - markings of up to 30 cm & 12 inches  - similar markings on both sides of ruler for convenience  - ruler has a hanging hole for added convenience

Read more less

Round to square adapter AOS-TOW 25mm Green Stuff World's Hollow Plastic Bases offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections.  They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as Round to square base adapters 40mm. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. These AOS base adapter will convert round to square and they will be compatible with games such as 9th Age, Warhammer the Old World, or older editions of Warhammer Fantasy with square serves a couple of purposes: Compatibility: Different tabletop wargames have different base shapes and sizes. For instance, Age of Sigmar typically uses round bases, while older editions of Warhammer Fantasy use square bases. They allow players to use models from one game system in another without having to rebase all their miniatures. Aesthetic Consistency: Some players prefer the aesthetic of squares over round ones, or vice versa. Base adapters enable players to maintain a consistent look across their army, regardless of the shape required by the game they're playing. Versatility: You can play games with different base shapes of miniatures at the same time without having to change everything. This is especially useful when everything is decorated and painted.  Tournament and Rule Compliance: In some tournament settings or specific rule sets, there may be requirements for base shape and size. Adapting bases ensures that your miniatures comply with these rules without needing to rebase your entire collection. Contains 20x Base Adapters round to square base adapter 25mm from Age of Sigmar to The Old World.

Read more less

Round to square adapter AOS-TOW 40mm Green Stuff World's Hollow Plastic Bases offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections.  They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as Round to square base adapters 40mm. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. These AOS base adapter will convert round to square and they will be compatible with games such as 9th Age, Warhammer the Old World, or older editions of Warhammer Fantasy with square serves a couple of purposes: Compatibility: Different tabletop wargames have different base shapes and sizes. For instance, Age of Sigmar typically uses round bases, while older editions of Warhammer Fantasy use square bases. They allow players to use models from one game system in another without having to rebase all their miniatures. Aesthetic Consistency: Some players prefer the aesthetic of squares over round ones, or vice versa. Base adapters enable players to maintain a consistent look across their army, regardless of the shape required by the game they're playing. Versatility: You can play games with different base shapes of miniatures at the same time without having to change everything. This is especially useful when everything is decorated and painted.  Tournament and Rule Compliance: In some tournament settings or specific rule sets, there may be requirements for base shape and size. Adapting bases ensures that your miniatures comply with these rules without needing to rebase your entire collection. Contains 10x Base Adapters round to square base adapter 40 mm from Age of Sigmar to The Old World.

Read more less

Hollow Plastic Bases 30x60mm Green Stuff World's Hollow Plastic Bases 30x60mm offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections.  They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as 25x50 to 30x60mm base adapters, allowing you to convert 25x50 mm to the larger 30x60 mm size. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. Contains 10x Cavalry Base Adapters 30x60mm. Compatible with Warhammer the Old World

Read more less