Tools all products

Silicone Moulds GSW introduces a revolutionary way of making scenery with these silicone moulds. Expertly designed these moulds allow you to produce infinite pieces of stone constructions. The parts have been very carefully designed to produce fully detailed pillars, walls, roofs, windows, archways, and doors in a way that can be combined with each other flexibly without sacrificing architectural rigor. These moulds produce all the parts needed to build walls, castles, fortresses, monasteries, convents, and anything you can think of with this type of architecture.  All parts and their functions are carefully explained in the included instruction manual to help you in your designs. Compatible with acrylic resin (especially recommended), UV resins, polyurethane resin, and epoxy resin. Scale 1:48 (wargames)Contains: 2x Silicone Moulds REMARKS:In the case of using acrylic resin, to avoid that the thinnest pieces can split during the demoulding phase, it is recommended to increase the % of acrylic resin to 50/50.Also, we remember that in cold environments the minimum drying times of acrylic resin increase to 1-2 hours depending on the temperature. Drying times may speed up in hot environments.

Read more less

The Citadel Colour Assembly Stand has been expertly designed to work with a range of modular hobby tools to enhance your painting and modelling experience. This wide, stable base features a snug holder to keep a Painting Handle or Painting Handle XL secure and safe while you work. You’ll also find two flexible yet sturdy assembly arms with rubberised jaws to hold components in place while the glue cures, making assembly easier than ever. Several shallow trays along the base allow you to collect the various bits and bobs that tend to pile up as you work. The arms are removable, allowing you to move them to any of the many circular sockets located around the base. The arms have been designed to fit in matching sockets on the Painting Handle XL for comfortably building the largest miniatures. The same sockets you find on this base are also sized to accommodate Sub-assembly Holders, so even the most sprawling projects stay organised and contained. This assembly base is compatible with the newer, ergonomic design of the Citadel Colour Painting Handle, and the older decagonal handle will not fit in the central holder. While you can find matching sockets on the updated Citadel Colour Spray Stick, continued use of canned sprays can degrade the rubber on the assembly arms, so we don’t recommend using them during your priming sessions. Miniatures displayed in images are for scale purposes only and are not included with this product. #painting #handle #stand #citadel

Read more less

Tires and Hubcaps mold Made of high-quality food-grade silicone, easy to use, and intricately cut for great impressions, these silicone molds are heat resistant (up to 240ºC) and durable. The molds are carefully carved for highly detailed and thorough results for both dimensional design and surface imprinting. Each mold has a large surface area measuring 6x12cm. The silicone molds work great with any sort of resin, we highly recommend using acrylic resin. Wait until the resin has dried completely before removing the pieces. Other materials such as milliput, milliput mixed with Plasteline, magic sculpt and others also work but are harder to use. We recommend the use of flexible steel scrapers to remove excess putty/clay without damaging them. With this article you can make: 8 Tires of 12.5 x 4.2mm. 8 Hubcapped wheels of 12.5 x 4.2mm. 5 Tires of 18 x 5mm. 4 Hubcapped wheels of 18x5mm.  

Read more less

Hobby Paint Shaker  The GSW Paint Shaker Machine is a practical and compact tool for stirring paint cans. Its simple design makes it easy to use and store, while the built-in suction cups allow for secure attachment to smooth surfaces. With this paint shaker, the paint mixing process is quick and hassle-free, allowing you to focus on the important work. Its design is not original to our brand, but its motor and internal components have been modified to improve the lifespan of this modeling tool and reduce noise generation during use. The device is designed to thoroughly mix the paint cans, ensuring that the components inside are well blended to obtain a smooth and uniform consistency. It is compatible with various types of paint, such as acrylic, lacquer, enamel, oil, and latex, regardless of the type of bottle. It can be used with a wide variety of paint bottles such as 10 ml, 12 ml Citadel, 17 ml standard dropper, 24 ml Citadel, 22 ml, 30 ml, and 60 ml, making it ideal for virtually all paints from any modeling paint manufacturer, regardless of shape or size. Technical specifications - Input power: 100-240v- Output power: 6V (3W)- Net weight 140gr./set + AC/DC adapter- Rotating speed: 3.200r/m- Frecuency:50/60Hz- Sound: 40/45 dB- Charging method: UE-plug- Cable length: 2 meters Content:  1x Paint shaker3x spare rubber bands Remarks:- Bottles should always be closed properly to prevent leaks.- The time of use should not exceed 15' continuously, and you should let it rest for 5' before using it again, otherwise it could damage the motor.- The mixing process can be improved by adding a mixing ball to your model paints.- This tool is not a toy

Read more less

The Dry Brush family includes brushes designed for the dry brushing technique and is identified by a glossy black stripe on the end of the handle.AK Dry Brush brushes are made with top-quality bristles that provide great durability. They have a rounded tip specially designed to get the most out of the dry brushing technique. Since this is an aggressive technique, the bristles need to be durable, easy to clean, and able to retain their shape. The rounded concentration of bristles allows for paint accumulation and effective rubbing on the surface. AK SYNTHETIC DRY BRUSH – XL

Read more less

Hobby knife with turned aluminium handle and 6mm opening. This blister pack includes a diagonal blade ideal for precision cutting, drilling, scraping, etc. The handle has been designed to provide a firm grip and allows full control. The knives are a basic tool for the hobby.

Read more less

Round to square adapter AOS-TOW 25mm Green Stuff World's Hollow Plastic Bases offer a unique and creative solution for adding dynamic water terrain effects to your wargaming and tabletop miniature collections.  They have been designed with a beveled edge and a hollowed-out interior to allow for water or swamp-themed terrain effects, giving the illusion of miniatures being partially submerged in water or wading through a swamp. These have been designed to be compatible with various wargames and board games, making them suitable for a wide range of gaming systems. Whether you play fantasy, sci-fi, historical, or other genres, they can add a touch of realism to your miniatures. Additionally, they can serve as Round to square base adapters 40mm. This feature is particularly useful if you use them as adapters for Warhammer the Old World bases, where the need to use old miniatures becomes a reality. These AOS base adapter will convert round to square and they will be compatible with games such as 9th Age, Warhammer the Old World, or older editions of Warhammer Fantasy with square serves a couple of purposes: Compatibility: Different tabletop wargames have different base shapes and sizes. For instance, Age of Sigmar typically uses round bases, while older editions of Warhammer Fantasy use square bases. They allow players to use models from one game system in another without having to rebase all their miniatures. Aesthetic Consistency: Some players prefer the aesthetic of squares over round ones, or vice versa. Base adapters enable players to maintain a consistent look across their army, regardless of the shape required by the game they're playing. Versatility: You can play games with different base shapes of miniatures at the same time without having to change everything. This is especially useful when everything is decorated and painted.  Tournament and Rule Compliance: In some tournament settings or specific rule sets, there may be requirements for base shape and size. Adapting bases ensures that your miniatures comply with these rules without needing to rebase your entire collection. Contains 20x Base Adapters round to square base adapter 25mm from Age of Sigmar to The Old World.

Read more less

Figuur roller AztecRoller voorzien van een basisfiguur waarmee een continu herhaald patroon op klei en plamuren kan worden gedrukt. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende texturen die u kunt kopen op basis van uw specifieke behoeften.Lengte: 14'50 cm (5'5 inches)Diameter: 2'5cm (1 inch)GEBRUIK INSTRUCTIES:1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een basis, gebruik dan een MDF basis. Dit omdat je de polymeerklei direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood, maar maak je geen zorgen dat het niet zal branden! In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller of de klei enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de deegrollen na gebruik goed te reinigen.Schoonmaak instructies:Gebruik na het werken met de deegroller een penseel met harde haren en voldoende water om eventuele resten op de deegroller te verwijderen, indien nodig. Om de veiligheid te garanderen, moeten kinderen nauwlettend worden gecontroleerd door een verantwoordelijke volwassene.

Read more less

Figuur roller ArcaneRoller voorzien van een basisfiguur waarmee een continu herhaald patroon op klei en plamuren kan worden gedrukt. Gemaakt van helder PMMA-plastic met verbazingwekkende antikleefeigenschappen. Niet giftig. Ze zijn er in verschillende texturen die u kunt kopen op basis van uw specifieke behoeften.Lengte: 14,50 cm (5'5 inches)Diameter: 2,5cm (1 inch) Patroon varieert met verschillende steensoorten, motieven (fleur de lis) en een filigree / rasters GEBRUIK INSTRUCTIES:1e - Meng de epoxyhars / klei / polymer klei tot een egaal plakkaat2e - Zorg voor een optimaal resultaat voor een glad en egaal oppervlak zodat het patroon goed zal overkomen. Gebruik desnoods een deegroller, fles of ander glad rond voorwerp. 3e - Afhankelijk van het type plamuur / klei is het raadzaam om de figuurroller nat te maken om vastzitten te voorkomen.4e - Verplaats de figuurroller langzaam en oefen gelijkmatige druk uit op alle punten voor een gelijkmatige afdruk op de klei, epoxy kneedhars of ander materiaal5e - Haal overtollig klei weg met een scherp mes. Het wordt aanbevolen om dit te doen als het eenmaal is opgedroogd om vervormingen in de stopverf / klei te voorkomen.Materialen:Er zijn veel verschillende kleien of epoxyhars op de markt en ze kunnen allemaal worden voorzien van een afdruk met de roller. Gebruik verschillende druk bij de verschillende materialen.Gewoonlijk zijn polymeerklei (Fimo of Sculpey-type) vrij eenvoudig om met deze Rolling Pins te bewerken, omdat ze een gemakkelijke correctie van fouten toelaten voordat ze worden gebakken. Wil je de structuur overbrengen op een basis, gebruik dan een MDF basis. Dit omdat je de polymeerklei direct op een MDF-basis kunt zetten en alles in de oven, inclusief de basis, kunt plaatsen. De droogtijd van deze klei is ongeveer 15 minuten bij 150ºC. MDF hout laat wel een lichte geur achter zoals bij geroosterd brood, maar maak je geen zorgen dat het zal branden! In het geval van epoxy basis zoals GreenStuff zijn er verschillende technieken die vergelijkbare resultaten opleveren. Het goede is: je hoeft ze niet te bakken, alleen te laten drogen en daarna kun je ze direct verwerken. Met Green Stuff, dat bijzonder kleverig is, is het het beste om de roller of de klei enigszins te bevochtigen voor je de figuur roller erover heen walst. U kunt ook de kleverigheid verminderen door talkpoeder toe te passen of door een oliebasis als Vaseline te gebruiken.Andere epoxy klei zoals de Milliput putty, bijvoorbeeld, zijn ook geschikt, maar we zouden niet aanraden om ze veel nat te maken. Als het mengsel te plakkerig is, is het beter om door te gaan met kneden totdat de plakkerigheid verdwenen is. Voor dit soort epoxyplamuren is het erg belangrijk om de deegrollen na gebruik goed te reinigen.Schoonmaak instructies:Gebruik na het werken met de roller een penseel met harde haren (of een scratch brush) en voldoende water om eventuele resten op de roller te verwijderen, indien nodig. Om de veiligheid te garanderen, moeten kinderen nauwlettend worden gecontroleerd door een verantwoordelijke volwassene. #greenstuffworld #rolling #pin #arcane

Read more less

Lightbox Studio A lightbox studio is a small, portable photography studio that is specifically designed for capturing high-quality images of small items such as miniatures. This type of photographic studio is an essential tool for photographers who specialize in product photography, as it allows them to take professional-looking photos that showcase their subjects in the best possible light. This set consists of a collapsible frame that is made of lightweight plastic materials that help to evenly distribute the light from the built-in LED lights. The LED lights are powered via USB cables that can be plugged into any USB port, such as those on a computer or a portable power bank. Its compact and collapsible design makes it easy to transport and set up, making it an ideal solution for photographers who need to take photos in different locations. The dimmer control allows you to adjust the brightness of the LED lights to suit your needs, giving you greater control over the lighting in your photos. This is important because the lighting can have a significant impact on the final quality of your images. As an additional accessory, ultra-black Maxx Darth backgrounds are available to effortlessly contrast and define your photos. A lightbox studio is an excellent tool for photographers who are just starting out or who are looking to upgrade their existing equipment. Its ease of use and affordability make it a popular choice among photographers who specialize in product photography, as well as those who take photos of small objects for personal or professional purposes. Color Rendering Index (CRI) = 70The LED lights have a color temperature of approximately 6000k-6500k. Content of the Lighting Box: 1x Foldable 21x21x21cm Lightbox Studio2x LED Strips2x Micro USB2x USB Dimmers2x EVA Backdrops: Black and White2x Fabric Backdrops: Black and White  #greenstuffworld #lightbox #studio #dimmers

Read more less

Control Panels molds Made of high-quality food-grade silicone, easy to use, and intricately cut for great impressions, these silicone molds are heat resistant (up to 240ºC) and durable. The molds are carefully carved for highly detailed and thorough results for both dimensional design and surface imprinting. Each mold has a large surface area measuring 6x12cm.  The molds work great with any sort of resin, we highly recommend using acrylic resin. Wait until the resin has dried completely before removing the pieces. Other materials such as milliput, milliput mixed with Plasteline, magic sculpt and others also work but are harder to use. We recommend the use of flexible steel scrapers to remove excess putty/clay from the molds without damaging them.

Read more less

YOUR PAINTS AND MIXES READY TO USE ANYTIME YOU NEED. Includes 40 paper sheets and 2 sponges. Dimensions: 23,5 x 17,5 x 2,5 cm. This wet palette is perfectly sized and has an airtight seal to preserve paint for longer. It contains a useful tray with compartments for mixing paints or storing various accessories. The wet palette is a tool mainly used by figure painters, but is increasingly being used by people who paint any kind of model with acrylics. It extends the shelf life of any acrylic so that it can be used for hours and, once closed, it preserves colors and color mixtures. Can be kept in the refrigerator. Components: 1. Cotton fibre cloth to keep the palette paper damp. It has a neutral white colour so as not to influence the visibility of the color and to make the mixtures more correct. Keep saturated with water for its correct functioning. Natural product without treatments to avoid any interaction with colors during use. 2. Special high quality interchangeable paper to keep your acrylic wet and ready at all times. Weight of 40 gr/m2. It is made of a thin silicone film that allows moisture transfer but prevents water transfer and dissolving of paints. It does not release fibres or hairs when working with brushes. 3. Practical tray for storage of accessories and brushes, for mixing and unloading paint. The wet pallet is watertight and airtight, made of the same material as marine containers for flares, charts and medicines. Its seal guarantee watertightness. This prolongs the life of paints and mixtures, especially in summer, hot climates and extreme conditions.

Read more less

The round brush family is identified by a reddish-brown tip on the handle. Round brushes are very versatile and are ideal for all types of work. Their variety in size allows us to apply both the base coat on the entire model and to paint all its small accessories and details, whether on a vehicle, plane, ship, spacecraft, or figure. AK SYNTHETIC BRUSH – ROUND 1

Read more less

40 ml.Special square anti rolling base. 1. Normal density and thicker maxoma fiber brush to glue.2. Glue by contact, quick drying. The classic modeling glue with medium drying time and more viscosity. It has a standard application brush for work on larger surfaces and general assembly. Great performance, is indicated for the assembly of plastic models and acts in a few seconds.

Read more less

Refillable markers 0.5 This pack of refillable markers is a reliable choice for a wide range of uses, such as crafts, drawing or professional projects. Each marker is designed with a refillable reservoir that makes it easy to reuse by adding a wide range of inks or paints.  These markers work well on various surfaces depending on the type of paint and its dilution: paper, plastic, glass, wood and more, making them versatile for different tasks such as painting comics or manga-style figures. For best results, it is recommended to use them with acrylic inks or chrome paints, which provide vibrant, opaque, and smooth coverage, and generally, due to their fluidity, do not need prior preparation. Their durable construction ensures consistent performance, and their ergonomic design allows for comfortable use during prolonged sessions. This set includes refillable paint pens with precision tips of 0.5mm, suitable for detailed lines and precise applications. Content: 6x

Read more less

Stainless Steel RULER  30cm - 12 inches double faced - quality hobby tool.   - clear black markings in millimeter/centimeter & in inches - markings of up to 30 cm & 12 inches  - similar markings on both sides of ruler for convenience  - ruler has a hanging hole for added convenience

Read more less

Silicone Brushes – Colour Shapers WHITE are excellent tools to sculpt and add incredible effects when modeling and sculpting with different putties, clays and fimo. They are somewhere between a brush, a palette knife, a modelling tool and your fingers. Easy-to-clean and long lasting. Non absorbent - Silicone tips in colour white (SOFT hardness)  This set is coming with 5 different brushes with 5 different tips with 8 mm length by 5 mm width - SIZE #2 Green Stuff World recommend BLACK FIRM brushes for less experienced users. 

Read more less

Colour Shapers Brushes SIZE #0 Silicone Brushes – Colour Shapers BLACK are excellent tools to sculpt and add incredible effects when modeling and sculpting with different putties, clays, and fimo. They are somewhere between a brush, a palette knife, a modeling tool, and your fingers. Easy to clean and long-lasting. Non-absorbent. This is the firm version of the black silicone brushes. They would be twice as hard as normal white brushes, and half than extra firm. This set is coming with 5 different brushes with 5 different tips with 6mm length by 3 mm width - SIZE #0 Each brush in the offered sizes has different uses depending on the putty we want to use. Nevertheless, Green Stuff World recommends using White tip brushes for soft putties, and SIZE #2 for harder materials such as Green Stuff, and Super Sculpey Firm among others. This is a question of taste and preferences, but in the end, and as your sculpting skills get better you will finally end up having 1 set of each.

Read more less

Siliconen mal Kelders - Dungeon Maak scenery op je eigen manier! Met deze siliconen mallen kun je eigenlijk onbeperkt diverse soorten kelders, muren, en andere ondergrondse scenery maken. Je kunt hiermee je eigen spelduur, flexibiliteit van verhaal en campagnes maken. Met deze 2 mallen kleder deuren, stenen bogen, puin en tegels met steen en houtdesign op een zodanige manier dat je eindeloos kan combineren. Oftewel het lijkt wel lego! In de Engelstalige instructies die erbij worden geleverd, wordt het uitgelegd en zal je snel je eerste resultaten kunnen maken. Welk bouwmateriaal? Tja alles wat je kunt gieten of zacht genoeg om in een mal te drukken. Denk daarbij aan acrylic resin (en waarom niet voorkleuren met pigment?), UV resin (met of zonder kleur voor de ramen), greenstuff, brownstuff, klei, gips, gietbeton of resin soorten. En voor de gekkigheid: deze mallen kunnen ook in de oven dus als je een taart of taartdecoratie maken voor de D&D fans...geen probleem! Schaal is 1/48. In de verpakking zitten 2 silicone mallen en instructievel. Silicone Moulds - Dungeon Revolutionary silicone molds with which you can build a dungeon of tiles of your own design. These molds have the ability to reproduce pieces infinitely, allowing your dungeons to be as large as you want. This adds a great level of flexibility with which you can edit, shorten or lengthen campaigns as you wish. The molds have been intricately detailed with barred and wooden dungeon doors, stone arches, piles of rubble, and tiles of different types to provide realism and beauty as well as practicality. All parts and their functions are carefully explained in the included instruction manual to assist you in your own designs. Compatible with acrylic resin, UV resins, polyurethane resin and epoxy resin. 1:48 scale (wargames) Contains: 2x Silicone Molds NOTE:In the case of using acrylic resin, to avoid that the finest pieces can split during the demoulding phase, it is recommended to increase the% of acrylic resin to 50/50.Also, we remember that in cold environments the minimum drying times of acrylic resin increase to 1-2 hours depending on the temperature. Drying times may be sped up in hot environments.

Read more less

Stalen mallen rond - 7 maten Gemaakt van hoogwaardig roestvrijstaal. Makkelijk in gebruik. Ideaal voor klei, epoxy, etc te snijden maar je kunt deze mallen ook prima voor voedsel gebruiken of als werkbasis. Een werkbasis is dat je deze mal gebruik om materialen bij elkaar te houden. Makkelijk als je wilt dat gelijmde materialen ook goed op de basis drogen. Ook geschikt voor voedsel.Roostvrijstaal Zeer geschikt in maatvoering voor alle wargaming and tabletop games. Bevat de volgende maten: 20mm 25mm 30mm 35mm 40mm 50mm 60mm

Read more less

Containment Moulds Set of Silicone Containment Moulds that allow you to limit the edges of the bases of your miniatures when pouring liquids and resins, such as our Ultraviolet Resin. Resin will not stick to the silicone nor will it affect the transparency of the resins. These moulds have the standard measurements of wargame bases. During the filling with resins, to reduce any potential deformities due to the high temperatures generated, we recommend the application of the resin in thin layers. Do not move or manipulate these moulds with resin inside until they have been completely hardened, since air may have trapped inside, releasing it and generating internal bubbles. These moulds are heat resistant up to 240ºC and very durable. Dimensions: 60x35mm75x42mm90x52mm105x70mm70x25mm Height: 10mm

Read more less

Miniatuur blad pons Linde bladeren 3 grootte - PAARS DONKER (DARK PURPLE) Miniatuur bladpons perfect om miniatuurbladeren te maken die bruikbaar zijn met schalen 1:35, 1:43 en 1:48 (54 mm, 32 mm en 28 mm). U kunt verschillende soorten papier en andere materialen gebruiken. Deze pons maakt 3 soorten lindebladeren. U kunt verschillende soorten papier en andere materialen gebruiken. Deze pons maakt 3 soorten bladeren.We raden aan gedroogde bladeren in verschillende kleuren te gebruiken. Natuurlijke bladeren moeten worden behandeld om de kleuren te behouden. Er zijn veel technieken om dit te bereiken. Ze kunnen ook worden geverfd. INSTRUCTIES:1. Zoek naar gevallen natuurlijke bladeren in het park naast uw huis.2. Laat de bladeren in een boek drogen, om de kleuren te behouden.3. Pons de natuurlijke bladeren.4. Gebruik PVA-lijm om de bladeren aan uw diorama te bevestigen.Bladen kunnen worden geslepen door aluminiumfolie door te stansen of te worden gesmeerd door ponsen door waxpapier. Andere ponsen obv kleur en hun maten: PUNCH COLOR SCALE TYPE OF LEAF RED 1:48 1:43 1:35  4 different GREY 1:48 1:43 1:35  4 different DARK GREEN 1:30 1:22 1:16 Lime LIGHT GREEN 1:30 1:22 1:16 Oak LIGHT PURPLE 1:48 1:43 1:35  Oak DARK PURPLE 1:48 1:43 1:35  Lime LIGHT BLUE 1:65 1:48 1:43 Lime ORANGE 1:65 1:48 1:43 Oak MEDIUM GREEN 1:30 1:22 1:16 Maple MEDIUM BLUE 1:48 1:43 1:35  Maple MEDIUM PURPLE 1:80 1:76 1:65 1:48 Maple DARK GREY 1:76 1:48 1:43 1:35 1:30 1:22 Roof Tiles YELLOW 1:65 1:48 1:43 1:35 1:30 1:22 Special DARK BLUE 1:65 1:48 1:43 1:35 1:30 1:22 Special

Read more less

A drybrush texture palette is essential because it ensures control and precision in the dry brushing process, a technique widely used to highlight raised areas on miniatures. Dry-brushing requires removing almost all the acrylic paint from the paintbrush before application, which can be difficult to gauge without a proper surface. The textured design allows painters to distribute color evenly and test the brush before touching the model, preventing overapplication and helping achieve crisp, clean highlights that bring out surface details beautifully. Another major advantage is consistency. When you're painting an entire army or terrain set, consistency in shading and highlighting is crucial for a cohesive look. This tool helps achieve that by standardizing the amount of paint used on the brush each time. This uniformity not only enhances the quality of the final result but also speeds up the painting process, making it more efficient and less prone to error, especially helpful for hobbyists working on large-scale projects. Additionally, they simulate real surface textures, allowing painters to practice strokes and test color combinations before applying them to the miniature. That means fewer surprises and more confident brushwork. It becomes more than just a tool—it's a training aid, a quality control station, and a creative tester all in one. Whether you're a beginner or seasoned painter, this improves both skill development and final results. They are made from durable injection-molded plastic and are crafted with fine details that mimic terrain or miniature surfaces. This realism makes it easier for painters to anticipate how the colors will interact with different textures. With a texture palette like this, miniature painters can push their creativity while maintaining a high standard of execution, making it a truly indispensable asset on any workbench.

Read more less

The Dry Brush family includes brushes designed for the dry brushing technique and is identified by a glossy black stripe on the end of the handle.AK Dry Brush brushes are made with top-quality bristles that provide great durability. They have a rounded tip specially designed to get the most out of the dry brushing technique. Since this is an aggressive technique, the bristles need to be durable, easy to clean, and able to retain their shape. The rounded concentration of bristles allows for paint accumulation and effective rubbing on the surface. AK SYNTHETIC DRY BRUSH – L

Read more less

The round brush family is identified by a reddish-brown tip on the handle. Round brushes are very versatile and are ideal for all types of work. Their variety in size allows us to apply both the base coat on the entire model and to paint all its small accessories and details, whether on a vehicle, plane, ship, spacecraft, or figure. AK SYNTHETIC BRUSH – ROUND 3/0

Read more less

3 BRUSHES Contains: AKB020 AKB021 AKB022 Tabletop brushes are suitable for both beginners in miniature painting for board games and advanced modelers. Their soft white bristles make it easy to control paint loading to prevent paint from entering the ferrule, ensuring the brush is always in optimal condition and remains sharp. They are recommended for applying enamels, oils, and effects, in addition to acrylic paint, making them an all-purpose option.

Read more less

Refillable markers 0.7 This pack of refillable markers is a reliable choice for a wide range of uses, such as crafts, drawing or professional projects. Each marker is designed with a refillable reservoir that makes it easy to reuse by adding a wide range of inks or paints.  These markers work well on various surfaces depending on the type of paint and its dilution: paper, plastic, glass, wood and more, making them versatile for different tasks such as painting comics or manga-style figures. For best results, it is recommended to use them with acrylic inks or chrome paints, which provide vibrant, opaque, and smooth coverage, and generally, due to their fluidity, do not need prior preparation. Their durable construction ensures consistent performance, and their ergonomic design allows for comfortable use during prolonged sessions. This set includes refillable paint pens with precision tips of 0.7mm, suitable for detailed lines and precise applications. Content: 6x

Read more less

Glass mixing balls in an 8mm size, are essential tools for artists and creative enthusiasts alike. These meticulously crafted spheres serve a vital role in the world of painting, art, and crafting, offering a versatile and reliable solution for enhancing the handling and longevity of various paints and mediums. At their core, they are designed to facilitate an efficient and consistent mix of the colors included in the colors within their respective containers. Placed inside paint pots or bottles, they act as small, unobtrusive agents of cohesion, actively combating the natural tendency of heavier pigments to settle at the bottom over time. This property is especially noticeable following extended periods of storage, where conventional model paints often require extensive manual mixing to restore their original consistency. One of the primary advantages of these lies in their ability to help keep colors vibrant and readily usable. Through their simple yet effective stirring action, they work tirelessly to maintain a homogeneous composition within the paint. This consistency is crucial for artists, as it ensures that the colors remain true to their intended vibrancy and quality.  They are well-suited for paints with a lower density, such as those that are more liquid or fluid in nature such as acrylic inks, but also for those solvent-based, or with elements capable of accelerating the oxidation of a metal ball. This versatility makes them adaptable to a wide range of artistic mediums, ensuring that artists can work with the materials that best suit their creative vision.  Crafted from high-quality glass, they offer assurance in the preservation of the acrylic paints's integrity. The material is not only resistant but also chemically inert, meaning that it will not interfere with the composition of the pigments or introduce any impurities. Artists can confidently rely on them to safeguard their creative materials, preventing unwanted alterations and ensuring the highest level of purity and color fidelity. Contents: 40x glass ballsWeight: 0.66 gr.Diameter: 8 mm

Read more less

Magnetic Sheet  - SELF ADHESIVE Self-adhesive flexible magnetic sheets provide a quick and simple way of magnetizing your wargames units without the necessity of drilling bases and gluing magnets. Square, rectangular, round, and oval most common shapes are available in a variety of sizes, but also as complete sheets to be cut to convenience with a pair of scissors or a craft knife. Use them alone, together with our rubber steel sheets, or together with our Neodymium Magnets depending on the attraction strength needed. Using magnetically-based figures allows you to field large units on the tabletop on their movement trays as one item. This removes the time spent moving figures one-by-one across the table. Even if the trays are knocked or tipped, you have a good chance of your figures staying attached and undamaged. Applying is very easy. Simply take the protective paper off the underside of the magnetic foil and stick it to the bottom of the bases. The thickness of the stickers is 0,9mm.

Read more less

Colour Shapers Brushes SIZE 2 - BLACK FIRM are excellent tools to sculpt and add incredible effects when modeling and sculpting with different putties, clays, and fimo. They are somewhere between a brush, a palette knife, a modeling tool, and your fingers. Easy to clean and long-lasting. Nonabsorbent - Silicone tips in color black. This is the firm version of the black silicone brushes. They would be twice as hard as normal white brushes, and half than extra firm. This set is coming with 5 different brushes with 5 different tips with 8 mm length by 5 mm width - SIZE 2 Each brush in the offered sizes has different uses depending on the putty we want to use. Nevertheless, Green Stuff World recommends using White tip brushes for soft putties, and SIZE #2 for harder materials such as Green Stuff, and Super Sculpey Firm among others. This is a question of taste and preferences, but in the end, and as your sculpting skills get better you will finally end up having 1 set of each. 

Read more less

Clear Acrylic 40mm Bases -  TRANSPARENT See where you miniature stands on the board by this acrylic transparant base. Compatible with any wargame or board game. Each pack contains 10 x 40mm round clear acrylic bases. #clear #acrylic #bases #transparant #40mm#greenstuffworld

Read more less