Gretchin mobs make up for their shocking lack of quality with sheer quantity. The natural cowardice and feeble-limbed incompetence of the Gretchin race does not predispose them to the arts of war, and a typical Grot would prefer to have his head buried in a sporehole than to actually participate in a proper battle.This box set contains 10 multipart plastic Gretchin and a multipart plastic Ork Runtherd, including: 12 Gretchin head variants and 2 Runtherd head variants, allowing you to assemble a horde of differently posed Gretchin. Models supplied with 32mm round bases for the Ork and 25mm round ba
The Destroyer Cults think nothing of sacrificing their physical forms to optimise themselves for slaughter. Lokhust Heavy Destroyers skim to battle upon repulsor-sled bodies, their upper limbs bound into gauss destructors or enmitic exterminators with which they decimate their foes with devastating blasts from afar.Whether you're looking to scythe through infantry or crack your enemy's biggest tanks with ease, you'll want a Lokhust Heavy Destroyer. This fast-moving gun platform pairs superbly with other Destroyer units or as a standalone for an army which just needs a little extra firepower.This kit builds one Lokhust Heavy Destroyer. Push-fit construction means you won't need any glue to build it, and the set comes with your choice of heads and deadly weapons. It is supplied in 33 plastic components and comes with a 60mm round base.
War Dog-class Knights act as hunting packs for their Dread Household. Armed with an eclectic array of weaponry, these nimble combat walkers range ahead of the terrible shadow cast by larger Knights, picking off enemy outriders and guarding the flanks of their colossal masters. Among these vicious engines, War Dog Karnivores revel in causing bloody confusion and despair, and eschew more potent ranged weapons to seek the visceral thrill that only close-quarters slaughter provides. This multipart plastic kit builds two War Dog-class Knights – any combination of War Dog Karnivores, War Dog Stalkers, or War Dog Brigands. War Dog Karnivores are a monstrous Lords of War choice that can provide deadly melee support to your Chaos Knights army – or be taken as a wandering Dreadblade pack for other Chaos forces. Armed with an infantry-shredding reaper chaintalon and an armour-breaking slaughterclaw, Karnivores are also equipped with your choice of a carapace-mounted diabolus heavy stubber or havoc multi-launcher. Each War Dog Karnivore can be further customised with a variety of articulated poses, armour plating, and unique faceplates and accessories, with their large carapaces making them a perfect painting project. This kit comprises 220 plastic components, and is supplied with 2x Citadel 100mm Round Bases. Also included is a War Dogs transfer sheet featuring 238 runes, sigils, and iconography for various Dread Households. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.
#40k #warhammer #chaos #knights #wardogs #karnivors
The Rogal Dorn Battle Tank is a lumbering behemoth, equally suited to anchoring a battle line, or grinding forward in support of an assault. Bristling with thunderous guns, these hulking armoured fighting vehicles pound breaches in enemy’s defences with enormous shells, and tear apart infantry with raucous storms of fire.This multipart plastic kit builds a Rogal Dorn Battle Tank – a mobile gun platform even larger than the mighty Leman Russ Battle Tank. The Rogal Dorn's primary weapon is mounted on its turret – you can choose between the high volume fire of a twin battle cannon, or the intimidating power of an oppressor cannon with a co-axial autocannon mounted on its side. A secondary hard point on the hull mounts either a castigator gatling cannon to punish hordes of infantry, or a pulveriser cannon to take on enemy armour.The kit includes an arsenal of optional weaponry – you can add optional sponson mounts armed with a pair of heavy bolters or multi-meltas, while optional forward mounts can house heavy stubbers or meltaguns. The tank's tracks can be upgraded with additional armour, and you'll also find extensive cosmetic options, including tow hooks, viewing slits, extra fuel, a search light, and stowed equipment. There are three crew members, including a spotter, tank officer, and a gunner for the pintle-mounted heavy stubber, which can be built with five head options or replaced with closed hatches.This kit comprises 171 plastic components and includes an Astra Militarum Vehicle Transfer Sheet, with 475 transfers featuring numerals, sigils, and a variety of regimental heraldry. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
#Rogal #Dorn #battle #tank
Aggressive and rebellious, Commander O'Shovah is an undisputed master of Mont'ka, the T'au metastrategy of the Killing Blow. Piloting his crimson battlesuit, he carves a bloody path into the enemy, leading his separatist Fire Caste forces from the front as he wields the enigmatic Dawn Blade with such strength and skill that no foe can stand against him. This multipart plastic kit builds Commander Farsight, leader to the breakaway Farsight Enclaves of the T'au Empire. His custom XV-86 Supernova battlesuit features advanced technology that provides greater agility and mobility, allowing him to put his prodigious skills with the blade to good use. Farsight wields the mysterious Dawn Blade in one hand, with a plasma rifle and shield generator mounted to his other arm. This legendary figure's wargear is loaded with details, from the ritual bonding knife strapped on his leg to the Farsight Enclaves icon worked into his shield's surface. His heroic pose atop a dramatic scenic base make Commander Farsight an eye-catching centrepiece for any collection or army. This kit comprises 48 plastic components, and comes with a Citadel 60mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
#tau #commander #farsight
A strong core of reliable and adaptable warriors that can lay down fire while advancing or holding down terrain is an invaluable aid to any tactician. In the case of strike forces bolstered by Primaris battle-brothers, this role is fulfilled by the Intercessor Squads. Capable of levelling overlapping salvoes of firepower, these squads often form the flexible fighting core of newly-founded Primaris Chapters – though of course many established Chapters have eagerly leveraged their abilities, fielding them alongside Tactical Squads. This multi-part plastic kit contains the components necessary to assemble a set of 10 Primaris Intercessors. Wearing Mk X Tacticus armour in order to take advantage of its protection and mobility, they prove to be reliable and adaptable warriors, each armed with bolt rifles. Their bolt rifles can be 1 of 3 variants – the standard bolt rifle with sickle magazine, auto bolt rifle with overcharger and box magazine, or stalker bolt rifle with longer-range sight and straight magazine. There are 16 right-hand shoulder pads decorated with the iconography of the Intercessors – enough to cover each of the variant arms, including 2 with an open radio panel, 2 gesturing for their squad to halt, 2 holding combat knives and 2 firing bolt pistols. There are a total of 24 different heads available in this kit, covering helmeted and bare options. The models can be assembled as either a 10-man squad, a squad of 9 Intercessors with a Sergeant or 2 separate 5-man squads, each with a Sergeant of their own. The Sergeants feature unique heads, with a helmet mag-locked to their belt, and unique tilting plates to help them stand out. Reflecting their battlefield versatility, the Intercessors come with lots of extra details to be added to their armour – 12 pistol holsters (2 empty, for the Intercessors actually wielding them), 10 ammunition and grenade pouches, 6 combat knife scabbards (4 empty), 4 single grenade pouches and 4 bolt pistol ammunition pouches. The Primaris Intercessors come as 266 components, and are supplied with 10 Citadel 32mm Round bases and a transfer sheet.
#space #marines #intercessors #indomitus #40K $games #workshop
A shape-shifting saboteur and shadowy assassin, deployed as a duplicitious Imperial Agent
Slice through enemies with a shimmering phase-sword and poisoned blades
Cause confusion with rapid strikes and acrobatic feints
This multipart plastic kit builds a Callidus Assassin, a shapeshifting Imperial Agent deployed to undermine and eliminate enemies of the Imperium. Clad in a synskin bodyglove, the Callidus is an acrobatic killer armed with a C'tan phase blade and a neural shredder pistol, as well as a selection of poisoned blades strapped to their thigh.This set comprises 11 plastic components and comes with 1x Citadel 32mm Round Base.This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints
Small and agile compared to their lumbering kin, Armiger-class Knights are still war machines of incredible power. Piloted by young squires or lowborn pilots, Armigers act as mobile support and outriders to keep larger Knights from being surrounded, receiving commands from their Noble lords through the Helm Mechanicum. Among these nimble engines, Armiger Helverins are mobile weapons platforms that can shatter an enemy assault in seconds, laying down blistering hails of heavy fire with their twin autocannons to harry heavy infantry and light vehicles alike.This multipart plastic kit builds two Armiger-class Knights – either Armiger Helverins or Armiger Warglaives. Armiger Helverins are a long-ranged Lords of War choice that can provide vital fire support to your Imperial Knights army – or be taken as a wandering Freeblade squadron for other Imperium forces. Armed with a pair of long-ranged autocannons and your choice of a carapace-mounted heavy stubber or meltagun, each Armiger Helverin can be further customised with a variety of articulated poses, armour plating, and six unique faceplates, with large carapaces making for a perfect painting project. This kit can also be assembled as a pair of War Dog Executioners or War Dog Huntsmen for Chaos Knights armies.This kit comprises 148 plastic components, and is supplied with 2x Citadel 100mm Round Bases. Also included is an Armiger transfer sheet, featuring heraldry for Imperial Knights. These miniatures are unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.
Clad in heavy Gravis armour, Aggressor Squads advance on the foe as walking fortresses of ceramite. More mobile than some other Space Marines, they’re better able to negotiate rough ground, making them versatile troops; while they are often employed in specific circumstances or on certain terrain, Aggressor Squads are used as reserves to plug breaches in gun lines or to spearhead an advance. The range of their weaponry is not too long, but when they get close enough to open fire, the result is a sweeping fusillade of large-calibre bolter shells that can shatter enemy charges. This multi-part plastic kit contains the components necessary to assemble a 3-man Primaris Aggressor Squad. Extremely heavily armoured, their silhouette is wider and chunkier than most Primaris Space Marines, due in no small part to the choice of auto boltstorm gauntlets or flamestorm gauntlets. There are three sets of each, with every weapon featuring pipes or belts that are fed from the enormous backpack. One set of flamestorm gauntlets features retracted barrels, as in close combat fists speak louder than flames… Should you choose the boltstorm gauntlets, the Aggressors can also take a fragstorm grenade launcher. You have the option of assembling 3 Aggressors or 2 Aggressors and a Sergeant; a host of options are available either way. There are 6 heads for the standard Aggressors, with respirators on the mask of those using flamestorm gauntlets, and 2 more specific heads for the Sergeant. The flamestorm-wielding Aggressors have their own shoulder pads, featuring larger blast shielding to protect them from the immense operating temperatures of their weapons. Also included are reliquaries and purity seals, with special examples for Sergeants featuring extra skulls. The Primaris Aggressors come as 107 components, and are supplied with 3 Citadel 40mm Round bases.
#40K #Space #Marines #primaris #aggressors
The Battle Sisters make up the vast majority of each of the Orders Militant, gunning down heretic, xenos and traitor alike with their holy trinity of weaponry – bolter, melta and flamer. They are the foot soldiers of the Emperor, his sword of defiance and his shield indomitable. Beneath their thundering bolters countless aliens, mutants, traitors and heretics have met their doom. Wherever they advance across the battlefield the light of the Emperor spreads like a holy dawn, manifesting in miracles that see the bolts and blasts of the enemy turned impossibly aside or the foe consumed by the fires of righteous retribution. Onwards the Battle Sisters march, their exultant prayers ringing out all the more stridently at these breathtaking proofs of the Emperor’s manifest divinity, and with every squeeze of their triggers they despatch more of the unworthy abominations that dare stand against the Master of Mankind. This kit builds 10 Battle Sisters and 1 Incensor Cherub. The Battle Sisters are equipped with boltguns, though up to two of them can be assembled with a special weapon (storm bolter, meltagun or flamer). Alternatively, one Battle Sister may carry a special weapon while another bears a heavy weapon (heavy bolter or heavy flamer). One of your Battle Sisters can carry a sacred Simulacrum Imperialis, with two variant options mounted atop the pole. The components also enable you to build a Sister Superior armed with a chainsword or power sword and a choice of ranged weapons, including a condemnor boltgun or combi-weapon (combi-flamer, -melta or -plasma). This set is supplied in 179 plastic components and contains 10x Citadel 32mm Round Bases and 1x Citadel 25mm Round Base. An Adepta Sororitas Transfer Sheet is also included.
#40K #Adepta #Sororitas #battle #sisters #squad
Hexmark Destroyers were once Deathmarks. Bursting from their dimensional oubliettes like ambush predators, these hunchbacked monsters unleash inescapable hails of enmitic fire. Independent ocular targeting and optimised firing patterns leave their prey with no escape. All but unrivalled in close-range firepower, each Hexmark Destroyer is like a mobile gun battery, able to blast its way through hordes of enemy infantry with impunity. If you're looking to support your advance or shore up a flank with some formidable fire support, a Hexmark Destroyer will serve you well. This kit builds a single Hexmark Destroyer, armed with six enmitic disintegrator pistols, and comes with a choice of two heads. The kit is supplied in 19 plastic components and one Citadel 50mm Round Base.
#necron #40K #hexmark #destroyer #9th
Commanders of the Tyranid swarm, Hive Tyrants are the enactors of the Hive Mind's will. Massively powerful creatures, every part of their body is perfectly created to maim and kill. The Hive Tyrant is an incredibly dynamic model, posed with monstrous, fibrous and ragged wings extended out wide and with only its serpent-like tail touching the ground, as if launching off into flight (or to pounce on its prey). Like other Tyranids, it has a distinctive chitinous shell with chimneys on its back, and a hideous skeletal underbody. The Hive Tyrant – or the Swarmlord, which the kit can alternatively be used to assemble – makes a striking addition to any Tyranid collection. The kit features a massive variety of weapons options, including scything talons, rending claws, boneswords and a lash whip. There are also parts to customise your Hive Tyrant and represent various biomorphs. This multipart plastic boxed set contains 59 components and one Citadel 60mm Round Base, with which to build one Tyranid Hive Tyrant or one Swarmlord.
Intercessors equipped with powerful jump packs soar over the battlefield, slamming into the foe like a hammer from the skies. They swiftly cut down all opposition with point-blank pistol fire and furious slashes from their chainswords, before launching off to engage the next target.This multipart plastic kit builds five Jump Pack Intercessors, a rapid assault force of airborne Space Marines. These warriors wear bulky but powerful jump packs, and are armed with heavy bolt pistols and roaring chainswords – one Intercessor can trade their heavy bolt pistol for a searing plasma pistol. You can also build a Sergeant with an armoury of extra weapon options – a hand flamer or plasma pistol, and a power sword or power fist.The kit includes plenty of cosmetic options, including bare or helmeted heads for every Intercessor, unique heads and tilting plates for the Sergeant, and a variety of grenades, holsters, pouches, and relics to accessorise each squad.This kit contains 108 plastic components, 5x Citadel 32mm Round Bases, and a Space Marines Infantry Transfer Sheet. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
#intercessors #jump #pack #combat #40K #warhammer
The Leman Russ is the primary battle tank of the Imperial Guard, forming the spearhead of countless armoured columns. Those enemies that do not fall to the bombardment of their cannons and numerous hull-mounted guns are crushed mercilessly beneath their heavy treads. These reliable and formidable tanks can be found in nearly every Astra Militarum regiment in the galaxy, and have become synonymous with the Imperium's fury.This multipart plastic kit builds a Leman Russ Battle Tank – a versatile armoured vehicle with a wide range of variants. This tank can be built with one of seven powerful turret weapons – a battle cannon, demolisher battle cannon, eradicator nova cannon, executioner plasma cannon, exterminator autocannon, punisher gatling cannon, or vanquisher battle cannon – allowing you to arm your Leman Russ for busting open tanks, shredding alien swarms, or anything in between. It also sports a hull-mounted secondary weapon – a lascannon, heavy bolter, or heavy flamer – and can be equipped with two optional sponson-mounted guns – a pair of heavy bolters, heavy flamers, multi-meltas, or plasma cannons.The kit includes cosmetic options such as a searchlight, handles, and a choice of an exposed crewman or closed hatch. It can alternatively build a Tank Commander – a skilled squadron officer for the Astra Militarum, mounted in a Leman Russ.This kit comprises 150 plastic components and includes an Astra Militarum Vehicle Transfer Sheet, with 475 transfers featuring numerals, sigils, and a variety of regimental heraldry. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
A shooty, choppy, dead 'ard Troops choice for Orks
Builds 10 Boyz, including a Boss Nob and an Ork with a choice of special weapon
The cornerstone of every Waaagh!
Ork Boyz surge into battle in huge, unruly mobs dotted with crude special weapons and led by foul-tempered Boss Nobz. Most simply stampede towards the enemy lines, relying on their numbers and natural hardiness to carry the charge home. This kit builds 10 Ork Boyz, a surly and belligerent Troops choice for your Ork armies. With a love of all things choppy and shooty, these hooligans are the ideal infantry mob, able to soak up masses of firepower and still retaliate with brutish glee.This kit builds five Ork Boyz equipped with a slugga and choppa, three with shootaz, one with a special weapon, and one Boss Nob to lead them. Special weapon options for one ork give you a choice of more dakka with a big shoota or big booms with a rokkit launcha, while the Boss Nob comes with helmeted or unhelmeted options and a choice between a nasty power klaw or a big choppa.This set comprises 54 plastic components and is supplied with 10x Citadel 32mm Round Bases and 1x Ork Transfer Sheet. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.
K #xenos
A 128-page rules supplement for Warhammer 40,000
Your essential guide to collecting and playing Death Guard armies in the grim darkness of the far future
Packed with background material, art, and photography to inspire you
Features Combat Patrol and Crusade rules, 36 datasheets, six Detachments, and more
Codex: Death Guard is a vital book for collectors who enjoy setting the chosen of Nurgle upon an unsuspecting galaxy. This impressive tome is packed with debased artwork, plague-fuelled background material, inspiring photography, and the rules you need to unleash your diseased warriors in games of Warhammer 40,000. You'll find datasheets, Detachments, narrative Crusade rules, and a self-contained Combat patrol section to help you fight tight, tactical games with your collection. This book will allow you to live out your worship of Grandfather Nurgle no matter how you like to collect, paint, and play with your Death Guard.Inside this 128-page hardback book, you'll find:– Revolting background material for these bile-soaked warriors, including their history and current ruinous activities– Epic art and photography to inspire you to spread the blessings of Nurgle– Rules for using the Death Guard and daemons of Nurgle in games of Warhammer 40,000, with 36 datasheets, six Detachments, and two army-wide rules– A set of rules to launch your own narrative Crusade, brewing Alchemical Pathogens and earning Boons of Nurgle– A guide to painting your Combat Patrol and rules for fielding the Maggot Lords in skirmish-sized gamesThis book also contains a one-use code to unlock Codex: Death Guard content in Warhammer 40,000: The App.
Max 1 per klant, per bestelling, per adres. Bestel je er meer dan 1 Death Guard battleforce dan wordt je gehele bestelling geannuleerd.
16 plastic miniatures for Warhammer 40,000
A solid core of Death Guard infantry supported by heavy war machines
Unleash a withering hail of firepower before grinding your foes into the mud under your heavy tracks
Start a new army project, or grow your existing collection, and save money compared to buying the kits separately
This loaded box contains a Death Guard force for use in games of Warhammer 40,000. Led by a Lord of Poxes, and supported by a trio of war machines, they are ready to lay waste to anyone who would stand against them. Units of Blightlord Terminators and Plague Marines march inexorably forward, laying down withering hails of fire as they advance.The Foetid Bloat-drone can be equipped with plaguespitters, a plague probe, or a fleshmower.In addition to the plagueburst mortar, the Plagueburst Crawler can be armed with sponson-mounted plaguespitters or entropy cannons, and a heavy slugger or rothail volley gun.The Blightlord Terminators have loads of options for assembly, including combi-bolters, bubotic blades, baleswords, a reaper autocannon, a plague spewer, a blight launcher, a flail of corruption, and a combi-weapon.The Plague Marines can be armed with a variety of weapons, from boltguns to bubotic axes, a blight launcher, a plasma gun, a meltagun, a plaguebelcher, a plaguespewer, a mace of contagion, a great plague cleaver, a plague flail, a plasma pistol, and a bolt pistol. There are also options for an icon of despair, an optional Plague Champion, and different heads, making it easy to personalise your squad.No matter how you choose to build them, this box makes for a fantastic way to start a new Death Guard army, or expand your collection with a flexible set of plague-spreading miniatures – and save money over buying each kit separately.This set includes the following multipart plastic miniatures:– 1x Lord of Poxes– 1x Foetid Bloat-drone– 1x Plagueburst Crawler– 1x Myphitic Blight-hauler– 5x Blightlord Terminators– 7x Plague MarinesThis kit comprises 353 plastic components, 1x Citadel 80mm Round Base, 1x Citadel 60mm Round Base, 6x Citadel 40mm Round Bases, and 7x Citadel 32mm Round Bases. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.The Lord of Poxes will be available separately at a later date. The other miniatures in this box are available separately.
This multi-part plastic kit contains the components necessary to assemble a set of 3 Deathshroud Bodyguard. Impressively large and dense, covered in rot, decay, tentacles and horror, these models exemplify the corrupting gift that Nurgle imparts. Each is armed with a manreaper – a large scythe, pitted and pockmarked with rust and disease, it stands even taller than the Deathshroud who brandish it – and a plaguespurter gauntlet, used to squirt unpleasant maladies at the unfortunate. Each of the three is bedecked with Nurgle symbolism, found in the rust, boils and chips in their armour, through which vile tentacled and bloated flesh poke, barely covered by ragged cloaks. there are 7 variant heads included, a mix of helmeted and bare, and an extra plaguespurter gauntlet – this is for an optional unit Champion, who has the option of wielding two of these.The Deathshroud Bodyguard come as 51 components, and are supplied with 3 Citadel 40mm Round bases.
Each Norn Emissary is a purpose-bred beast, spawned by its Norn Queen to accomplish a specific and singular objective – be it hunting a strategically gifted commander, abducting a knowledgeable prey-being, or pursuing some other ineffable goal. These colossal heralds of the Hive Mind's agenda meld terrifying psionic potential with speed, intelligence, and monstrous strength, ensuring that a Norn Emissary is more than equal to its alien task.This multipart plastic kit builds a Norn Emissary, a psychic monster tailored to overcome all resistance. Stood atop a ruined structure covered in Tyranid growths, the Emissary shreds all opposition with massive scything talons and cruel, dextrous claws, its visible brain tissue suffused with unnatural power. The Norn Emissary stands amongst the larger creatures in the Tyranids range, towering above even a Hive Tyrant – it's an excellent centrepiece model, loaded with alien detail to show off your painting skills. The kit also includes two different lower torsos, allowing you to pose your Emissary surveying the battlefield or leering down at its prey.This miniature can alternatively be built as a Norn Assimilator, a single-minded Tyranid monster with toxic bone harpoons.This kit comprises 58 plastic components and comes with a Citadel 100mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
#tyranids #Norn #emissary #Assimilator #warhammer #eenkleinewereld
The First. The Son of the Forest. The Master of Caliban. The Primarch of the Dark Angels. Lion El'Jonson stalks from mist-wreathed shadow realms like an ancient questing knight, hunting the galaxy's myriad terrors. With his immense blade, Fealty, the Primarch cleaves apart the most heinous of monstrosities, while the Emperor's Shield erupts in blazes of light and force in response to his foes' savage blows. This is a jaw-dropping miniature befitting the legendary status of a Primarch, striding over battlefield rubble in ornate, knightly armour adorned with personal heraldry and the symbols of the Dark Angels. He's joined by a pair of mysterious Watchers in the Dark, and can be built with one of four different head options – a bare head, a hooded head, a crested helm, and a hooded helm. This miniature makes an incredible centrepiece for any Dark Angels army. Painters will enjoy the level of detail and the different textures that make up his robes, armour, and weapons. Meanwhile, gamers will enjoy setting the Lion upon the enemies of the Imperium and proving his prowess as a duelist. This kit comprises 43 plastic components, and is supplied with a 60mm Citadel Round base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. Paint your own Lion El'Jonson in a manner befitting a Primarch with help from the Citadel Colour painting guide – including painting his variant heads.
#dark #angels #lion #el #jonson
There are few Orks alive who are tougher or more belligerent than Mozrog Skragbad. A beast hunter of infamy, Mozrog once spent many days in self-imposed exile, hunting the most dangerous beasts he could find. One such monster nearly got the better of him, eating him alive, but Mozrog is nothing if not pugnacious – clawing his way out, he returned to his tribe to be patched up with all manner of bionic bits. In battle, he rides the unmissable pale-skinned squigosaur, Big Chompa – the only living creature as cantankerous as Mozrog himself.Should your Waaagh! need a Warboss as powerful as a living deff rokkit, Mozrog and his mount Big Chompa are the perfect pair to add to your army. Between Mozrog’s bionics and Big Chompa’s unstoppable jaws, no foe can escape unharmed. Years of arduous hunting and a stubborn attitude have also rendered Mozrog nearly impervious to damage, shrugging off wounds that would lay low even most savage Beast Snagga Orks.This multipart plastic kit is comprised of 43 components with which you can build the Beast Snagga Orks Character Mozrog Skragbad and his squigosaur, Big Chompa. Alternatively, this kit can be assembled as a Beastboss on Squigosaur. It comes supplied with one 80mm Citadel Round base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel paints.
#Mozrog #Skragbad #orks #boyz
An awesome sight, descending at incredible velocities from orbiting warships to engage and annihilate enemy craft, Stormhawk Interceptors are a stunning hymn to aerial superiority that the Space Marines sing with gusto. The frontal armour and huge firepower makes them excellent dogfighters, hurtling through the clouds to execute target after target in a blazing display of incendiary defiance. Often seen in Vehemence Attack Patterns, Stormhawk squadrons and their golden haloes of flares discharged to gently dissuade incoming fire are a signal that whatever planet the skies are over, they belong to the Emperor.
This multi-part plastic kit contains all the components necessary to assemble one Stormhawk Interceptor, ruler of the skies and destroyer of the Imperium’s flying enemies. Armed with a twin-linked assault cannon, a las-talon (which can be replaced with an icarus stormcannon,) twin-linked heavy bolters (which can be replaced with either a skyhammer missile launcher or typhoon missile launcher) and an infernum halo-launcher. Supplied with a transfer sheet, one Citadel 120mmx92mm Oval base and a flying stem.
This kit can also be used to assemble the Stormtalon Gunship.
#40K #Space #Marines #stormhawk interceptors #stormtalon #gunship
Ghost Arks are often pressed into service as conventional transport vehicles, conveying reinforcements to some vital area of the battlefield, or allowing Necron forces to attack from an unexpected quarter.
The Necron Ghost Ark is a large model with an imposing presence in a collection of miniatures. Immense engines sit at the rear of the model, and its frame displays detailing such as orbs and dynastic glyphs. A Necron Lord sits atop the Ghost Ark in a commanding position. In front of the Lord, a line of Necron Warriors is positioned as if standing inside the gargantuan ribcage of some primordial beast. The Ghost Ark also contains formidable weaponry with five gauss flayers on each side.
This multi-part plastic boxed set contains 168 components, two small flying stems, one large flying base and two Necron transfer sheets with which to build one Necron Ghost Ark or one Doomsday Ark.
This kit is unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints.
Equipped with the latest XV25 Stealth Armour these troops are the 'lone wolves' of the T'au army, operating independently of other formations.
This boxed set contains 3 multi-part plastic XV25 Stealth Suits and a markerlight drone.
Powering into battle on a trio of articulated track units, the Myphitic Blight-hauler is a light Daemon Engine that provides the Death Guard with heavy firepower wherever it is needed. Resembling a Bloat-drone that has been stripped of its turbines, this strange machine has heavy weapons mounted on its carapace, and its rusting armoured plates can absorb impressive punishment – as can its blubbery exposed flesh-parts, which soak up appalling trauma. Designed to be as easy as possible to assemble for new hobbyists while being detailed enough for the hardiest veteran to appreciate, this kit is an Easy To Build Death Guard Myphitic Blight-hauler. Push-fit, with no glue required, this is incredibly straightforward to put together and comes on a pre-coloured green plastic sprue. The Myphitic Blight-hauler is an unpleasant combination of machine and putrid rotting meat. From the front, it resembles some grotesque armoured vehicle, with a curved carapace featuring the symbol of Nurgle and 2 large, covered tracks. Where this differs from an ordinary attack vehicle, however, is the toothed maw at the bottom. From the rear, the horror continues – a third track is visible, along with a mass of flabby flesh, bound into the machine with straps and metal. The Myphitic Blight-hauler is armed with a multi-melta and missile launcher, which are mounted either side of the carapace. This plastic kit comes as 13 components, and is supplied with a Citadel 80mm Round base. Rules for this miniature are included in the box.
Five veteran alien hunters
Countless customisation options
The core of many Deathwatch kill teams
This multi-part plastic kit contains everything necessary to assemble 5 Deathwatch Veterans. These are among the most customisable warriors in Warhammer 40,000, and this set gives you a plethora of weapons and other options to make your unit distinctive – including 18 different Chapter shoulder pads to mark the brotherhoods from which each Veteran hails.CONTENTS– 7 Space Marine heads– 5 Deathwatch left shoulder pads– 18 Chapter specific right shoulder pads– 5 Deathwatch Boltguns (with shot selector)– 5 Deathwatch Power Swords– 2 Thunder Hammers– 1 Frag Cannon– 2 Storm Shields– 2 Shotguns– 1 Infernus Heavy Bolter– 1 Stalker-pattern Boltgun– 2 Power Maces– 1 Xenophase BladeThese miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.
An infernal tome to harness the Heretic Astartes in Warhammer 40,000
160 pages of macabre art, rules, riveting background material, and epic photography to inspire you
Includes Combat Patrol and Crusade rules, 48 datasheets, eight Detachments, and more
haos Space Marines are genetically augmented transhumans who seek only to conquer, slaughter, and despoil. Clad in baroque power armour bedecked in macabre trophies and infernal iconography, Chaos Space Marines do battle alongside growling battle tanks, monstrous Daemon Engines, and thronging masses of cultist thralls. Some are possessed by daemonic allies, others bear Chaos-tainted artefacts or wield warp sorcery. No matter what form they take, they pursue their Long War with pitiless brutality, slaughtering any who stand in their path in an ever-escalating campaign of vengeance, conquest and apocalyptic violence.Codex: Chaos Space Marines is an essential tome for building and painting a collection of Heretic Astartes, and using them in games of Warhammer 40,000. Inside this book you'll find an infernal hoard of inspirational background material and art to inspire you, along with rules for waging your own galactic war with narrative Crusade campaigns, skirmish-sized Combat Patrol games, and plenty of rules for matched play games. This grimoire is also packed with photography to evoke the horror of facing down this terrible foe, as well as more detailed examples of single miniatures.Inside this 160-page hardback book, you'll find:– Background material about the many hosts of Chaos Space Marines, including some of the most notorious warlords of the Black Legion– Macabre artwork revealing the horrible truth of these infernal soldiers at war, including their daemonic allies and insane, gibbering cultists– 48 datasheets detailing each unit, including their wargear, profiles, and unique abilities, from nightmare Spawn to immortal Daemon Princes– A massive eight themed Detachments, each with their own detachments rules, Enhancements and Stratagems– Crusade rules to lead your warband on a furious campaign to seek the favour of the Dark Gods– Combat Patrol rules to use Zarkan’s Daemonkin in fast-paced skirmish games– An ‘Easy Metal showcase of stunning Citadel miniatures from the incredible Chaos Space Marines range
Redemptor Dreadnoughts are giant war machines that crush bone and splinter skulls as they bludgeon through enemy ranks. Taller, broader and more cunningly wrought than the Dreadnoughts of traditional design, these goliaths of battle are powered by hyper-dense reactors and sophisticated fibre bundles. They can accelerate from a thudding stomp to a loping, thunderous gait that shakes the ground, barrelling through hails of fire in glorious defiance. Such is the miraculous design of the Redemptor’s neural links that its inhabitant, despite being entombed in the sarcophagus within the Dreadnought’s chest, can exercise control with surprising dexterity and speed.This multi-part plastic kit contains the components necessary to assemble a Primaris Redemptor Dreadnought. Standing twice the height of the already-tall Primaris Space Marines – and taller and broader than the standard Dreadnought – this is an exceptionally aggressive-looking model that befits its status as a powerhouse on the gaming table. It comes with a choice of gatling cannon or plasma incinerator on the right arm, with a Redemptor fist and heavy flamer support weapon or gatling cannon on the left, 2 chest-mounted fragstorm grenade launchers or storm bolters and a carapace-mounted Icarus rocket pod for aerial denial.The heavy armour on the chest – replete with flat surfaces and sharp lines, perfect for adding transfers and detail – of the Redemptor Dreadnought can be modelled to pivot open, showing the sarcophagus interred within. The adventurous hobbyist can remove the pegs from the waist, arms and legs of the model too, allowing for a greater range of posing options.The Primaris Redemptor Dreadnought comes as 109 components, and is supplied with a Citadel 90mm Round base and a transfer sheet.
Bullgryns are recruited from most obstinate of the Ogryn strain of abhumans, clad in heavy armour and armed with rugged assault weaponry built to withstand their unwieldy strength. A line of these heavily-muscled humanoids is a frightening sight, advancing in shield-lines from which shots bounce harmlessly, issuing thunderous blows with heavy mauls and lobbing explosives as they charge.This multipart plastic kit builds three Bullgryns – bulky, armoured auxiliaries equipped with heavy shields and combat weapons. Each Bullgryn can be armed with either an explosive grenadier gauntlet or a hefty maul, and carries either a towering slabshield or more manoeuvrable brute shield. The kit features a variety of accessories and interchangeable components to customise your abhuman squads – including four masked or bearded heads, three shield designs of each type, and a selection of spare ammo, frag bombs, pouches, and flasks. It also includes a special cybernetic head for a Bone 'ead squad leader.This kit can alternatively build three gun-toting Ogryns, or it can be used to build Nork Deddog or an Ogryn Bodyguard, as well as two Ogryns or Bullgryns.This kit comprises 121 plastic components, and is supplied with 3x Citadel 40mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.
#Bullgryns #astra #militarum
The Vigilator Squads of the Silent Sisterhood are women of supreme skill. They wield the two-handed blades of their order with consummate skill and dexterity, for they have been trained in an ancient sword-form passed down from generation to generation since the first Sisters knelt at the Emperor’s throne. The executioner greatblades the Vigilators wield are heirloom weapons kept razor-sharp by their owners, clad in the finest disruptive power fields the Tech-Priests of Mars can devise, cutting through the heaviest armour with ease.This multi-part plastic kit contains the parts necessary to assemble a 5-model Vigilator Squad, melee specialists who carry executioner greatblades. One model can be assembled as a Sister Superior, with her own specially-posed greatblade, loincloth, shoulder pad, seal and choice of 2 heads.The kit can be optionally be assembled as Prosecutors, who operate more flexibly and carry bolters for longer-range combat and Witchseekers, who carry flamers for devastating multi-target assaults. It includes 6 executioner greatswords, 5 Umbra-pattern boltguns and 5 flamers. This kit comprises 67 components, and is supplied with 5 Citadel 32mm Round bases and a Burning of Prospero transfer sheet.
#adeptus #custodes #custodian #squad #sisters #silence #warhammer #40K
Assault Intercessors are amongst the most widespread close-support units in a Chapter's arsenal. Firing their heavy bolt pistols as they close upon the foe, they charge into the fray, where they make short work of their enemies with brutal swings of their chainswords.Assault Intercessors are the perfect Troops choice unit for players who favour more aggressive strategies (or simply like to charge every enemy in sight!), where they can put their brutal close-range wargear to deadly use.This multipart plastic kit contains the components necessary to assemble a set of 10 Assault Intercessors. The models can be assembled as either a 10-man squad, a squad of 9 Assault Intercessors with a Sergeant or 2 separate 5-man squads, each with a Sergeant of their own. They are each armed with an Astartes chainsword and heavy bolt pistol.There are additional components in the kit that enable you to upgrade your Sergeant models with unique heads, a helmet mag-locked to their belt, and unique tilting plates to help them stand out. Your Sergeants can also each be equipped with a choice of specialist wargear, including a power sword, power first or thunder hammer instead of their Astartes chainsword, and a hand flamer or plasma pistol in place of their heavy bolt pistol.This kit is supplied with 10x Citadel 32mm Round Bases and an Ultramarines Transfer Sheet.
#space #marines #intercessors #assault #black #templarK $games #workshop
The spiritual leaders of their Chapters, Chaplains are awe-inspiring warrior priests who administer rites, preserve rituals and perform ancient ceremonies of initiation, vindications and redemption that are as important to a Space Marine Chapter as its roll of honour or skill at arms. Every Chapter has its own Chaplain, acting as leader in both devotions and combat and second only to the company Captain in rank. This multi-part plastic kit contains the parts necessary to assemble a Primaris Chaplain. Wearing iconic jet-black Mk X power armour featuring unique greaves, he fights fiercely using his absolver bolt pistol and crozius arcanum. His hooded cassock lends him an air of sinister intensity, with plenty of spikes, chains, skulls and purity seals dotted all about. His helmet features a skull design and the chestplate of his armour is modified to portray an exposed ribcage – a reminder of the mortality that his enemies face. His backpack has an attached iron halo, whose 12 points aptly represent the High Lords of Terra. The Primaris Chaplain comes as 12 components, and is supplied with a Citadel 40mm Round base. The kit also includes a Space Marines Character Transfer Sheet, which features Captain, Chaplain, Librarian and Lieutenant iconography.
#spacemarine #techmarine #primaris
Bladeguard Veterans are inexorable warriors, advancing relentlessly with blades held high – the very image of noble knights of myth. Members of their Chapter’s elite 1st Company Veterans, each of these vastly experienced Space Marines has fought to preserve the Imperium across uncounted worlds. Lead the charge with these close combat masters. Each is armed with a master-crafted power sword and equipped with a storm shield. There is an option to make one of the squad into a sergeant. The kit also includes multiple head, tilting plate, pistol, and holster variants as well as plasma pistol and neo-volkite pistol options for the sergeant. These grizzled veterans are clad in the finest plate, which looks great in the colours of any Chapter. This 78-part plastic kit makes three Bladeguard Veterans and is supplied with three 40mm Citadel round bases. It is also supplied with an Ultramarines Infantry transfer sheet.
#40K #Space #Marines #bladeguard #veterans
The power-hungry veterans known as Chosen are amongst the most experienced and ruthless fighters of the Heretic Astartes. Granted – or having seized – their warband’s most powerful weapons, these warriors undertake the most glorious and dangerous missions, and are the bane of all that lives. This multipart plastic kit builds five Chosen, hardened Chaos Space Marine warriors who lead the assault on enemy positions. These veterans are armed with a dizzying variety of vicious melee armaments – accursed weapons in the form of chainswords, chainaxes, power fists, lightning claws, and different power weapons – as well as bolt pistols, boltguns, and optional special weapons for blasting chunks out of the foe – two plasma pistols, and two combi-weapons with three configurations each (flamer, melta, or plasma). In addition to cross-compatible weapons, this massively customisable kit offers a huge range of interchangeable cosmetics – including five unique backpacks, 10 unique shoulder pads, 13 unique heads (both bare and helmeted), and various accessories – as well as components to build a Chosen Champion with a choice of chestplates, loincloths, trophies, and a Chaos icon with different symbols for each Chaos God. This set comprises 102 plastic components and is supplied with 5x Citadel 32mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.
#chaos #space #marines #40k #warhammer #choses
A Fast Attack choice for the Space Marines
Swift and deadly bike-mounted hunters
Three push-fit plastic miniatures
Outrider Squads rove in advance of the main Space Marine lines, guarding flanks of larger formations or hunting down enemy infiltrators. When battle is joined, they conduct lightning-fast hit-and-run attacks on defended positions, and run down those who would try to escape the vengeance of their Chapter.Look no further than the aptly named Outriders to roar ahead of your main army and take the fight to the enemy vanguard from the outset, or to sweep around your opponent’s flanks and encircle their forces.This set is supplied in 40 plastic components and also contains 3x Citadel 90mm Hex Holed Oval Bases. The miniatures are push-fit, so require no glue to assemble. A Primaris Space Marines Transfer Sheet is also included.
#outriders #spacemarines #40k
An HQ choice available to the Space Marines
Armed with a devastating variety of weaponry
Can repair tanks and war machines in battle
Primaris Techmarines stride selflessly through oncoming fire to soothe the machine spirits of wounded war engines, deftly peeling back damaged armour plates to repair burnt-out cabling and bending warped panels back into shape with their servo-arms and mechadendrites.Techmarines specialise in repairing tanks and war machines, so if you favour armoured warfare, never leave home without a Techmarine or two in order to keep them in tip-top shape!This kit builds one Primaris Techmarine. He is equipped with a grav-pistol, Omnissian power axe, servo-arm, mechadendrite, and a shoulder-mounted forge bolter. It is supplied in 24 plastic components and comes with a Citadel 40mm Round Base.
#spacemarine #techmarine #primaris
