Producten

Met koude dranken is de achtergrond donker, met een warme inhoud verandert de achtergrond (rondom) in een warhammer scenery. Super gaaf en normaal alleen verkrijgbaar in de UK. Het is een grote mok (15cm hoog en 10cm diameter). NIET geschikt voor de magnetron of afwasmachine (wordt te warm en dan gaat de thermo kwaliteit van de weergave hard achteruit). Breekbaar (keramiek). Kleuren donkerblauwe tinten met overgang in zeer donkerblauw. Space marine en Chaos marine als figuren. #magic #mug #space #marine #chaos #heat #changing

Lees meer minder

Unlike their Necron masters, Canoptek Spyders never sleep, but while away the aeons servicing the structures of their Tomb World. Though the Canoptek Spyder is essentially an automated drone, it is still a formidable foe when the situation demands. Any enemy foolish enough to stray within reach of the Canoptek Spyder will have flesh scoured from bone by an array of mechanical tools and pincers. If a triad of Canoptek Spyders operate together, one takes overall command, harnessing the processing capacity of the others to create a supermind far greater than the sum of its parts. This hyper-efficiency is passed on to all Canoptek Wraiths and Canoptek Scarabs in the immediate vicinity, allowing a co-ordinated and precise response to any threat - and ensuring the safety of their slumbering masters. When it comes to ferocious mechanical constructs, you can't get much nastier than a Canoptek Spyder. If it isn't tearing apart enemy infantry or tanks with an array of hooks and blades, then it can be used to repair your damaged vehicles. The icing on the cake (or the chip on the circuit board - whatever the Necron equivalent of cake is) is that, even in the heat of battle, it can spawn Canoptek Scarabs to boost your war efforts and irritate your foes. This multi-part plastic boxed set contains 30 components with which to build one Necron Canoptek Spyder. This kit comes with two ball socket stems and one large flying base. This kit is supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints. #necron #canoptek #spider #40k #indomitus

Lees meer minder

Doom Scythes are heralds of terror, supersonic fighter craft that range far ahead of a Necron invasion. Thanks to the precision of his android brain, the pilot can simulate billions of strategies in nanoseconds. The crescent-shaped Necron Doom Scythe is an impressive model. It’s numerous, elegant panels are covered in Necron iconography, and there are numerous orbs and grills located around the model, and a spine-like engine. As well as a Necron pilot tucked away in the centre of the model, the weapons on the flyer include a twin-linked tesla destructor and a death ray set within a claw-like vice. This multi-part plastic kit contains 51 components, a flying stem, large oval base and a Necron transfer sheet with which to build a Doom Scythe. This kit can be used optionally to build a Night Scythe.

Lees meer minder

Hexmark Destroyers were once Deathmarks. Bursting from their dimensional oubliettes like ambush predators, these hunchbacked monsters unleash inescapable hails of enmitic fire. Independent ocular targeting and optimised firing patterns leave their prey with no escape. All but unrivalled in close-range firepower, each Hexmark Destroyer is like a mobile gun battery, able to blast its way through hordes of enemy infantry with impunity. If you're looking to support your advance or shore up a flank with some formidable fire support, a Hexmark Destroyer will serve you well. This kit builds a single Hexmark Destroyer, armed with six enmitic disintegrator pistols, and comes with a choice of two heads. The kit is supplied in 19 plastic components and one Citadel 50mm Round Base. #necron #40K #hexmark #destroyer #9th

Lees meer minder

As the shock troops of the Necron army, a phalanx of Immortals will strive for victory using every tactic at their disposal. They can easily withstand a hail of heavy bolter fire. The Necron Immortals possess the classic, intimidating skeletal-metal form of their race. Their elongated limbs are jointed with metallic bolts, they stand in an eerily hunched manner, and their heads are set within a shroud of armour and industrious shoulder pads. Subtle Necron iconography is displayed on their breastbone. You can equip the Immortals with the devastating gauss blasters and tesla carbines. This multi-part plastic boxed set contains 80 components, two Necron transfer sheets and five Citadel 32mm Round Bases with which to build five Necron Immortals or five Necron Deathmarks.

Lees meer minder

Repugnant to other Necrons, Ophydian Destroyers echo elements of servile Canoptek Wraiths and reviled Flayed Ones in their murder-optimised bodies. Tunnelling through solid ferrocrete with frenzied violence and flickers of dimensional displacement, they burst into view to ambush, hack and rend their prey apart. Slice your way through enemy units with the fast and deadly Ophydian Destroyers. Armed with hyperphase weapons and Ophydian claws, little can survive an attack from these floating killers. You can accompany your unit with a Plasmacyte who can power up the Destroyers. The kit comes with six different heads, meaning that you can customise your Destroyers. This 57 part plastic kit makes three Ophydian Destroyers and a Plasmacyte. It is supplied with three 50mm round Citadel bases and a 28.5mm round Citadel base.  #necron #ophydian #destroyers #40k #9th

Lees meer minder

Striding forward in a rush of ungainly steps, their weaponised limbs sweeping in a whirlwind of gore, Skorpekh Destroyers feed their need to kill whenever they are unleashed upon the battlefield. Nothing else can override the hard-wired desire to kill that empowers these deranged Necrons. Canoptek Plasmacytes use their monomolecular proboscis to inject an infectious, sentient energy into the degranged members of the Destroyer Cults. This hateful substance – as dangerous as it is powerful – heightens their nihilistic insanity and drives their mindless annihilation to new heights. Skorpekh Destroyers are among the most lethal close-combat killers within the ranks of the Necron legions. If tearing the enemy army asunder is what you seek, then look no further than these gloriously insane slaughterers, whose killing prowess you can amplify even further with the attention of the Plasmacyte! This kit builds three Skorpekh Destroyers – two armed with hyperphase threshers and one with a hyperphase reap-blade – as well as a Plasmacyte. Push-fit construction means you won't need any glue to build it. The kit is supplied in 29 plastic components and comes with three Citadel 50mm Hex Hole Round Bases and one Citadel 28.5mm Hex Hole Round Base. #necron #skorpekh #destroyers #9th #40k

Lees meer minder

Canoptek Doomstalkers stride with eerie grace. Whether prowling their masters’ armouries as tireless sentinels or providing mobile fire support to the Necron legions, the Doomstalkers annihilate all those who dare stand against them with searing shots from their doomsday blasters. Need something blown up? Chances are, the Canoptek Doomstalker is the construct for the job! This towering sentry will make short work of your enemies, blasting them to bits with its terrifying doomsday blaster. It's also an incredible defensive choice, laying down covering fire when its neighbouring units are fired upon.  This kit builds one Canoptek Doomstalker, and push-fit construction means you won't need glue to build it. It is supplied in 14 plastic components and comes with a 90mm round base.

Lees meer minder

Necron Warriors form the majority of a tomb world's nigh-inexhaustible armies. They are a corps of fleshless mechanoids, ranged in their millions against the vital races of the galaxy. Ancient limbs are corroded with age, yet the strength of their metal sinews has not faded, nor has the hard-wired loyalty to their Overlords. Canoptek Scarab Swarms are found throughout tomb worlds and Necron spacecraft, where automated routines compel them to break down damaged matter of all kinds with their entropic mandibles. They feed on organic and non-organic matter alike, converting it into energy which is re-routed into repair protocols. Whether you're looking to cut down the enemy at range with gauss flayers or march inexorably forward to shred them at close range with gauss reapers, all the while assailing them with swarms of Canoptek Scarabs, this is the perfect kit to build your Necron army around. This kit builds ten Necron Warriors – each with a choice of two heads and the option of either a gauss flayer or gauss reaper – as well as three Scarab Swarms. Push-fit construction means you won't need any glue to build it. The kit is supplied in 70 plastic components and comes with ten Citadel 32mm Round Bases and three Citadel 40mm Hex Hole Round Bases  #necron #warriors #40k #9th

Lees meer minder

The legendary strategist of the Sautekh Dynasty, ready to lead your Necrons Blasts opponents with the Staff of the Destroyer and a Gauntlet of Fire Commands the power of the storm itself This multipart plastic kit builds Imotekh the Stormlord, the supreme leader of the Sautekh Dynasty. This imposing phaeron stands tall atop a dais of unearthed Necron architecture, his billowing cloak crawling with scarab-constructs. His left hand is encased in a Gauntlet of Fire, which generates waves of viridian flame, while his right grips the Staff of the Destroyer – his dynasty's deadly icon of office. Imotekh's armoured chestplate and metal brow sport lordly glyphs of Sautekh, while other Necrontyr sigils decorate his ornate mechanical body, proclaiming his rank as ruler of an unliving empire.This kit comprises 15 plastic components and comes with a Citadel 40mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Lees meer minder

The pre-eminent astromancer of the Necrons guides your army to victory Strikes foes through warped time with the Staff of Tomorrow Predicts the future, and then rewrites it to suit his schemes This multipart plastic kit builds Orikan the Diviner, the greatest Chronomancer across all the Necron dynasties. Held eerily aloft by his prehensile spine, this legendary figure clutches an active chronometron alongside the Staff of Tomorrow, a temporal instrument that exists half a second ahead of 'now', striking before he even moves. Orikan is festooned with eldritch spheres to drive his divinatory calculations, and draped in a segmented mantle and striking headdress befitting a high Cryptek.This kit comprises 15 plastic components and comes with a Citadel 40mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Lees meer minder

A swift, merciless leader for your Necrons Phase through enemies and obstacles with a translocation shroud Slay foes with a lethal blade, and restore servants with a resurrection orb This multipart plastic kit builds a Necron Overlord with a translocation shroud, an artefact of arcane dimensional science. He's depicted phasing through space itself, and portions of his body and wargear are already dematerialised into streamers of energy that swirl around him. One of his folded arms carries a deadly hyperphase blade, while the other clutches a resurrection orb. His metallic body is covered in Necrontyr glyphs, as well as mechanical details such as the power nodes that fuel the translocation shroud.This kit comprises five plastic components and comes with a Citadel 40mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Lees meer minder

Boyz are the rank and file of an Ork army. Orks are tough, determined fighters who fall upon the enemy in great tides of howling violence. Generally armed with the heavy, solid-shot, slugga and brutal, edged choppas, they blow great gouges from the enemy before hacking them apart. This boxed set contains 11 multi-part plastic Ork Boyz, and includes options for sluggas, choppas, shootas, heavy weapons and stikk bombz. Models supplied with 32 mm round bases. #boys #boyz, #orks #ork #40K #xenos

Lees meer minder

No two Battlewagons are the same, for the Meks that build them can never resist cobbling on armour plates, ramming spikes, assorted dakka, and random gubbinz. However, all are rugged transport tanks with the capacity to bear a vast number of angry Orks into battle while shrugging off the worst the enemy can throw at them.Get your Boyz into battle in style with a Battlewagon, the last word in mobile fortresses for any discerning Warboss. As well as being an amazing transport choice, you can also take loads of weapons options so that you can shoot, smash, and crush your enemies as you get your Boyz to exactly where they need to be.This 135-piece plastic kit makes one Battlewagon. The kit includes options for a big shoota, kannon, killkannon, lobba, zzap gun, deff rolla, grabbin' klaw, and wreckin' ball and can alternatively be assembled as a Gunwagon or a Bonebreaka.This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel paints. #battlewagon #orks

Lees meer minder

Ork warbosses are usually stationary for only two reasons. One is when they are giving an enemy – or an unlucky grot – a good hiding, and the other is when they are shouting at their Boyz to give the foe a good krumpin'. The Big'ed Bossbunka provides the perfect place to holler from given its bosspole, which is outfitted with a very loud PA system. Constructed from the head of a repurposed Ork Gargant, the Big'ed Bossbunker gives your Warboss a way of directing the many rowdy Boyz under his command. If they misbehave, or if anyone attempts to unseat the Warboss, they will need to contend with a slew of shots from the Big'ed Bossbunker's big shoota and the Gaze of Gork – a weapon constructed from a jet engine that has been bashed into one of the Gargant's eyes.This multi-part plastic kit is comprised of 27 components, and can be assembled into one Big'ed Bossbunker. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel paints. #big'ed #bossbunka #orks

Lees meer minder

Boss Snikrot is no mere Ork cutthroat – he is a murderous legend whose obsession with guerilla warfare has seen him hone the kunnin' taktiks of the Blood Axe clan into an almost supernatural mastery of infiltration. Snikrot is an unseen terror, leading his Red Skull Kommandos deep behind enemy lines – by the time his terrified foes realise he is upon them, the Boss is already opening their throats with his rip-toothed blades. This multipart plastic kit builds Boss Snikrot, an infamous Kommando leader and Ork assassin. He’s armed with a pair of combat blades known as Mork's Teeth, perfect for close quarters fighting behind enemy lines, as well as a custom silenced slugga. The kit includes loads of cosmetic details shared with Ork Kommandos, such as a backpack festooned with extra gear, a smoke grenade to decorate his base, and a choice of three head builds – one bare, one with Snikrot's trademark night-vision goggles over his eyes, and one with the goggles lifted onto his forehead. This kit comprises 17 plastic components and comes with a Citadel 40mm Round Base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints. #boss #snikrot #orks

Lees meer minder

Gretchin mobs make up for their shocking lack of quality with sheer quantity. The natural cowardice and feeble-limbed incompetence of the Gretchin race does not predispose them to the arts of war, and a typical Grot would prefer to have his head buried in a sporehole than to actually participate in a proper battle.This box set contains 10 multipart plastic Gretchin and a multipart plastic Ork Runtherd, including: 12 Gretchin head variants and 2 Runtherd head variants, allowing you to assemble a horde of differently posed Gretchin. Models supplied with 32mm round bases for the Ork and 25mm round ba

Lees meer minder

There are few Orks alive who are tougher or more belligerent than Mozrog Skragbad. A beast hunter of infamy, Mozrog once spent many days in self-imposed exile, hunting the most dangerous beasts he could find. One such monster nearly got the better of him, eating him alive, but Mozrog is nothing if not pugnacious – clawing his way out, he returned to his tribe to be patched up with all manner of bionic bits. In battle, he rides the unmissable pale-skinned squigosaur, Big Chompa – the only living creature as cantankerous as Mozrog himself.Should your Waaagh! need a Warboss as powerful as a living deff rokkit, Mozrog and his mount Big Chompa are the perfect pair to add to your army. Between Mozrog’s bionics and Big Chompa’s unstoppable jaws, no foe can escape unharmed. Years of arduous hunting and a stubborn attitude have also rendered Mozrog nearly impervious to damage, shrugging off wounds that would lay low even most savage Beast Snagga Orks.This multipart plastic kit is comprised of 43 components with which you can build the Beast Snagga Orks Character Mozrog Skragbad and his squigosaur, Big Chompa. Alternatively, this kit can be assembled as a Beastboss on Squigosaur. It comes supplied with one 80mm Citadel Round base. This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel paints. #Mozrog #Skragbad #orks #boyz

Lees meer minder

Bladeguard Veterans are inexorable warriors, advancing relentlessly with blades held high – the very image of noble knights of myth. Members of their Chapter’s elite 1st Company Veterans, each of these vastly experienced Space Marines has fought to preserve the Imperium across uncounted worlds. Lead the charge with these close combat masters. Each is armed with a master-crafted power sword and equipped with a storm shield. There is an option to make one of the squad into a sergeant. The kit also includes multiple head, tilting plate, pistol, and holster variants as well as plasma pistol and neo-volkite pistol options for the sergeant. These grizzled veterans are clad in the finest plate, which looks great in the colours of any Chapter. This 78-part plastic kit makes three Bladeguard Veterans and is supplied with three 40mm Citadel round bases. It is also supplied with an Ultramarines Infantry transfer sheet. #40K #Space #Marines #bladeguard #veterans

Lees meer minder

Support troops who truly live up to their name, the Space Marine Devastators deliver the Emperor’s judgment via stunning displays of brutal firepower. Missiles slam into ranks of enemies, blasts of scorching plasma melt craters into the very earth, lascannons punch through the hardest defences and the droning hum of grav-cannons rises to a terrible crescendo as the target of the Devastators’ wrath is reduced to nothing more than memory and dust. This multi-part plastic kit contains everything you need to build five Space Marine Devastators, one of which can be optionally assembled as a Space Marine Devastator Sergeant, with three Sergeant heads included. The poses these models can be assembled in are classic Devastator poses, with targeter helmets and castellated greaves designed to counter the immense recoil thrown out by their heavy weapons. Speaking of heavy weapons, the Devastator squad features an *incredible* array of the Imperium’s finest. Included in this squad: Two Space Marine Grav-Cannon and Back Pack Assemblies; Two Space Marine Missile Launcher and Back Pack Assemblies; Two Space Marine Multi Melta and Back Pack Assemblies; Two Space Marine Lascannon and Back Pack Assemblies; Two Space Marine Plasma Cannon and Assemblies; Two Space Marine Heavy Bolter and Back Pack Assemblies; One each of Combi Plasma, Combi Melta, Combi Grav, Combi Flamer, Bolter and Storm Bolter; One each of Power Fist, Power Sword, Power Axe, Lightning Claw, Chainsword and Thunder Hammer; One each of Plasma pistol, Bolt pistol, Grav pistol. Five Purity Seals, two Servo Skulls, a pile of spent shells, a skull base piece, ten Space Marine targeting helmets, six sets of legs, six Sergeant hands and eight Space Marine shoulder pads round out this immense collection of components. Also supplied are five 32mm Citadel Round Bases.

Lees meer minder

Outrider Squads rove in advance of the main Space Marine lines, guarding flanks of larger formations or hunting down enemy infiltrators. When battle is joined, they conduct lightning-fast hit-and-run attacks on defended positions, and run down those who would try to escape the vengeance of their Chapter. Look no further than the aptly named Outriders to roar ahead of your main army and take the fight to the enemy vanguard from the outset, or to sweep around your opponent’s flanks and encircle their forces. This set is supplied in 40 plastic components and also contains 3x Citadel 90mm Hex Holed Oval Bases. The miniatures are push-fit, so require no glue to assemble. A Primaris Space Marines Transfer Sheet is also included. #outriders #spacemarines #40k #9th #indomitus

Lees meer minder

Clad in heavy Gravis armour, Aggressor Squads advance on the foe as walking fortresses of ceramite. More mobile than some other Space Marines, they’re better able to negotiate rough ground, making them versatile troops; while they are often employed in specific circumstances or on certain terrain, Aggressor Squads are used as reserves to plug breaches in gun lines or to spearhead an advance. The range of their weaponry is not too long, but when they get close enough to open fire, the result is a sweeping fusillade of large-calibre bolter shells that can shatter enemy charges. This multi-part plastic kit contains the components necessary to assemble a 3-man Primaris Aggressor Squad. Extremely heavily armoured, their silhouette is wider and chunkier than most Primaris Space Marines, due in no small part to the choice of auto boltstorm gauntlets or flamestorm gauntlets. There are three sets of each, with every weapon featuring pipes or belts that are fed from the enormous backpack. One set of flamestorm gauntlets features retracted barrels, as in close combat fists speak louder than flames… Should you choose the boltstorm gauntlets, the Aggressors can also take a fragstorm grenade launcher. You have the option of assembling 3 Aggressors or 2 Aggressors and a Sergeant; a host of options are available either way. There are 6 heads for the standard Aggressors, with respirators on the mask of those using flamestorm gauntlets, and 2 more specific heads for the Sergeant. The flamestorm-wielding Aggressors have their own shoulder pads, featuring larger blast shielding to protect them from the immense operating temperatures of their weapons. Also included are reliquaries and purity seals, with special examples for Sergeants featuring extra skulls. The Primaris Aggressors come as 107 components, and are supplied with 3 Citadel 40mm Round bases. #40K #Space #Marines #primaris #aggressors

Lees meer minder

Ancients bear a Space Marine Chapter’s precious standards. These glorious relics have been present in some of the Chapter’s most notable battles, their finely worked designs commemorating countless campaigns and heroic deeds. They are symbols of selfless commitment and the unbreakable loyalty of battle-brothers.In the field, the presence of these veteran Space Marines and their priceless relics inspires nearby battle-brothers to epic feats of bravery and aggression in their Chapter's name.This model includes a choice of a helmeted and unhelmeted heads, as well as two different banners with sculpted details, and a choice of bolt rifle or power sword. The kit is comprised of 22 plastic components, with which you can assemble 1 model, and is supplied with a 40mm Citadel Round Base.This miniature is supplied unpainted and requires assembly – we recommend using Citadel Plastic Glue and Citadel paints. #40K #Space #Marines #primaris #ancient

Lees meer minder

The spiritual leaders of their Chapters, Chaplains are awe-inspiring warrior priests who administer rites, preserve rituals and perform ancient ceremonies of initiation, vindications and redemption that are as important to a Space Marine Chapter as its roll of honour or skill at arms. Every Chapter has its own Chaplain, acting as leader in both devotions and combat and second only to the company Captain in rank. This multi-part plastic kit contains the parts necessary to assemble a Primaris Chaplain. Wearing iconic jet-black Mk X power armour featuring unique greaves, he fights fiercely using his absolver bolt pistol and crozius arcanum. His hooded cassock lends him an air of sinister intensity, with plenty of spikes, chains, skulls and purity seals dotted all about. His helmet features a skull design and the chestplate of his armour is modified to portray an exposed ribcage – a reminder of the mortality that his enemies face. His backpack has an attached iron halo, whose 12 points aptly represent the High Lords of Terra. The Primaris Chaplain comes as 12 components, and is supplied with a Citadel 40mm Round base. The kit also includes a Space Marines Character Transfer Sheet, which features Captain, Chaplain, Librarian and Lieutenant iconography. #spacemarine #techmarine #primaris

Lees meer minder

Dedicated marksmen, Eliminators haunt the shadows of the battlefield, seeking out targets of opportunity and bringing them down with pinpoint volleys of fire. Then, these silent assassins slip away looking for their next prey. Each model in this squad can be armed either with a las fusil, which is perfect for taking out the toughest targets, or a bolt sniper rifle, which provides a choice of ammunition to suit any situation. The Sergeant can also be armed with an instigator bolt carbine. All three models can be assembled with or without helmets and the kit comes with a number of optional parts allowing you to individualise the unit. The plastic kit is made up of 60 components and makes three Eliminators. Each model is supplied with a Citadel 40mm Round base. The set also includes a Primaris Space Marines Infantry transfer sheet. #40K #Space #Marines #primaris #eliminators

Lees meer minder

Redemptor Dreadnoughts are giant war machines that crush bone and splinter skulls as they bludgeon through enemy ranks. Taller, broader and more cunningly wrought than the Dreadnoughts of traditional design, these goliaths of battle are powered by hyper-dense reactors and sophisticated fibre bundles. They can accelerate from a thudding stomp to a loping, thunderous gait that shakes the ground, barrelling through hails of fire in glorious defiance. Such is the miraculous design of the Redemptor’s neural links that its inhabitant, despite being entombed in the sarcophagus within the Dreadnought’s chest, can exercise control with surprising dexterity and speed.This multi-part plastic kit contains the components necessary to assemble a Primaris Redemptor Dreadnought. Standing twice the height of the already-tall Primaris Space Marines – and taller and broader than the standard Dreadnought – this is an exceptionally aggressive-looking model that befits its status as a powerhouse on the gaming table. It comes with a choice of gatling cannon or plasma incinerator on the right arm, with a Redemptor fist and heavy flamer support weapon or gatling cannon on the left, 2 chest-mounted fragstorm grenade launchers or storm bolters and a carapace-mounted Icarus rocket pod for aerial denial.The heavy armour on the chest – replete with flat surfaces and sharp lines, perfect for adding transfers and detail – of the Redemptor Dreadnought can be modelled to pivot open, showing the sarcophagus interred within. The adventurous hobbyist can remove the pegs from the waist, arms and legs of the model too, allowing for a greater range of posing options.The Primaris Redemptor Dreadnought comes as 109 components, and is supplied with a Citadel 90mm Round base and a transfer sheet.

Lees meer minder

Razorbacks are common variations of the Rhino chassis that can be armed with a variety of powerful turret-mounted heavy weapon systems that offer the squads they carry effective fire support before and after they disembark. As well as a choice of weapons for the Razorback's main turret – either a twin heavy bolter or twin lascannon – this kit comes with a wealth of optional extras including a spiked ram, ammo crate, fuel canisters, a cable, smoke launchers, comms relay, hunter-killer missile, and tow hooks. It also features a fully detailed interior, with a communications array and boltgun on arming rack, and an optional Space Marine driver/gunner. This 76-piece plastic kit makes one Razorback or one Rhino. It comes supplied with an Ultramarines Vehicle Transfer sheet.

Lees meer minder

1)     Thunderstrike Thunderstrikes outmanoeuvre the foe at every turn, targeting vulnerable points in armour, fuel tanks and missile hoppers to turn engines of war into raging fireballs. Just a single Thunderstrike is capable of destroying armoured breakthrough attempts, and when one is on the battlefield, few enemies are safe. A Storm Speeder Thunderstrike is a speedy tank hunter. Add this to your force if your opponent likes to use lots of heavily armoured vehicles – your missiles and las-talon will be tearing through them in no time! This kit includes 94 components that can be used to build a Storm Speeder Thunderstrike armed with stormfury missiles, a thunderstrike las-talon and a twin icarus rocket pod. The gun platform can be built to move – intimidate your opponents by having your heaviest weaponry pointing right at their units! 2)     Hammerstrike The Hammerstrike excels at rooting out enemies from trench and bunker networks. Sweeping low over the battlefield, it employs searing melta blasts and volleys of rockets to crack the foe’s defence lines wide open. A Storm Speeder Hammerstrike bears weapons designed to bore through thick armour and destroy bunkers. Take this Storm Speeder variant if you're likely to be facing a dug-in foe with lots of fortifications to deal with. This kit includes 94 components that can be used to build a Storm Speeder Hammerstrike armed with a hammerstrike missile launcher, two krakstorm grenade launchers and a melta destroyer. The gun platform can be built to move – intimidate your opponents by having your heaviest weaponry pointing right at their units! 3)     Hailstrike The Hailstrike is so heavily armed that it can annihilate entire swathes of infantry in fusillades of blistering projectiles. Speeding over the battlefield, its specialised loadout shatters charging formations and shreds barricades and defences. A Storm Speeder Hailstrike adds fast-moving anti-infantry punch to your Space Marines collection. Choose this version of the Storm Speeder if you're going up against armies such as Orks or Genestealer Cults, or any force featuring lots of lightly armoured units. This kit includes 94 components that can be used to build a Storm Speeder Hailstrike armed with two fragstorm grenade launchers, an onslaught gatling cannon and a twin ironhail heavy stubber. The gun platform can be built to move – intimidate your opponents by having your heaviest weaponry pointing right at their units! This kit can instead build the Storm Speeder Hailstrike or Storm Speeder Hammerstrike. It is supplied with a Citadel 90mm Round Base and a Flying Stem. #40K #Space #Marines #thunderstrike #hammerstrike #hallstrike #storm #speeder

Lees meer minder

An awesome sight, descending at incredible velocities from orbiting warships to engage and annihilate enemy craft, Stormhawk Interceptors are a stunning hymn to aerial superiority that the Space Marines sing with gusto. The frontal armour and huge firepower makes them excellent dogfighters, hurtling through the clouds to execute target after target in a blazing display of incendiary defiance. Often seen in Vehemence Attack Patterns, Stormhawk squadrons and their golden haloes of flares discharged to gently dissuade incoming fire are a signal that whatever planet the skies are over, they belong to the Emperor. This multi-part plastic kit contains all the components necessary to assemble one Stormhawk Interceptor, ruler of the skies and destroyer of the Imperium’s flying enemies. Armed with a twin-linked assault cannon, a las-talon (which can be replaced with an icarus stormcannon,) twin-linked heavy bolters (which can be replaced with either a skyhammer missile launcher or typhoon missile launcher) and an infernum halo-launcher. Supplied with a transfer sheet, one Citadel 120mmx92mm Oval base and a flying stem. This kit can also be used to assemble the Stormtalon Gunship. #40K #Space #Marines #stormhawk interceptors #stormtalon #gunship

Lees meer minder

An awesome sight, descending at incredible velocities from orbiting warships to engage and annihilate enemy craft, Stormtalon Gunships are a stunning hymn to aerial superiority that the Space Marines sing with gusto. The frontal armour and huge firepower makes them excellent dogfighters, hurtling through the clouds to execute target after target in a blazing display of incendiary defiance. Often seen in Vehemence Attack Patterns,a Stormtalon Gunship squadrons and their golden haloes of flares discharged to gently dissuade incoming fire are a signal that whatever planet the skies are over, they belong to the Emperor. This multi-part plastic kit contains all the components necessary to assemble one Stormtalon Gunship, ruler of the skies and destroyer of the Imperium’s flying enemies. Armed with a twin-linked assault cannon, a las-talon (which can be replaced with an icarus stormcannon,) twin-linked heavy bolters (which can be replaced with either a skyhammer missile launcher or typhoon missile launcher) and an infernum halo-launcher. Supplied with a transfer sheet, one Citadel 120mmx92mm Oval base and a flying stem. This kit can also be used to assemble the Stormhawk Interceptor #40K #Space #Marines #stormhawk interceptors #stormtalon #gunship

Lees meer minder

Tactical Squads are the backbone of any Space Marine army. They hold ground; provide fire support and charge into bloody melees, as the ever-changing theatre of war dictates. This box contains everything you need to make a highly personalised 10 man Tactical Squad, including Sergeant and Special Weapon. There are so many options and extra details provided that we recommend that you take some time to look through the photos above to fully appreciate them all. Space Marines In order to build the Tactical Squad you get 11 torso fronts (of which 10 are unique designs); 10 different leg poses; 16 different heads (13 with helmets, 3 bare-headed); 22 shoulder pads; 10 backpacks (of which 9 are individual designs); and 10 sets of left and right arms. Weapons There are 10 unique boltguns, a gravgun, a meltagun, a plasma gun, a flamer, a missile launcher (including backpack and spare missiles). The squad Sergeant can be armed with a combination of power fist, power sword or chainsword, and plasma pistol, grav pistol or bolt pistol. You can also make any 1 of the following combi-bolters – combi-grav, combi-melta, combi-plasma, or combi-flamer. The squad can also be armed with a melta bomb, a selection of combat knives, and enough Frag and Krak grenades to arm each Space Marine. Extra equipment As if that wasn’t enough, you also get: a back banner for the squad sergeant (with the choice of 3 different banner tops); a holstered bolt pistol; targeting scopes for the boltguns; parchments and purity seals; ammo pouches; an auspex; and 3 spare hands (1 pointing, 1 holding a grenade, and 1 holding a boltgun cartridge). This plastic kit contains 179 components with which to make a 10 man Tactical Squad (and so much more!). Also included are 2 Ultramarines Infantry Transfer Sheet with which to add Chapter iconography and squad markings. This kit comes supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Paints.

Lees meer minder

10 Kroot Carnivores to provide melee punch and stealthy support for your T'au Empire army. Fast, versatile warriors armed with bladed rifles for both ranged and close combat, plus a tanglebomb launcher. Customise your kindred with a huge variety of heads, poses, baggage, and grisly trophies. This multipart plastic kit builds 10 Kroot Carnivores, agile alien mercenaries employed by the T'au Empire. Each of these stealthy hunters is armed with a bladed Kroot rifle, allowing them to harass enemies at range and wreak havoc in melee combat. You can equip one Carnivore with a heavy tanglebomb launcher, and build another as a veteran Long-quill to lead the unit, who can be armed with a double-barrelled Kroot carbine.This kit offers plenty of cosmetic build options, including interchangeable heads, a variety of shoulder pad designs, and a choice of poses for each Carnivore. You'll also find loads of accessories – pistols, quill grenades, pouches, ammo, cuts of meat, and even a Kroot Hound pup – to customise your hunting packs and ensure no two Kroot look quite the same.This kit comprises 106 plastic components and 10x Citadel 28.5mm Round Bases. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Lees meer minder