Welkom bij Een Kleine Wereld - Fantasy miniature (war)gaming

CloseClose

New Arrivals

42 producten


Datum: nieuw naar oud

Uitgelicht Best verkopende Alfabetisch: A-Z Alfabetisch: Z-A Prijs: laag naar hoog Prijs: hoog naar laag Datum: oud naar nieuw Datum: nieuw naar oud

  • Wet water proof SandPaper 180x90mm - 400 grit Wet water proof SandPaper 180x90mm - 400 grit

    Wet water proof SandPaper 180x90mm - 400 grit

    Nog 4 op voorraad Binnen 2 dgn verzonden

    Professional high-quality wet sandpaper for modeling, craft, DIY, and restoration works. These wet sandpapers have been impregnated with a synthetic abrasive on a waterproof base for wet sanding hand-works. Moisten the sandpaper with water or other lubricant and work on a wet surface, so it will prevent the surface from getting rough. For a perfect sanding/polishing of your models and miniatures, and combine different numbers progressively progressing from thickest grains (lower numbers) to finer grains (higher numbers), achieving an extraordinarily smooth and even finish. Easy to cut with scissors to use in different sizes, and also to adapt to other sanding tools.

    Nog 4 op voorraad Binnen 2 dgn verzonden

    €2,25

  • 3D Printed - Modern & SciFi - Traffic Cones 1:35 3D Printed - Modern & SciFi - Traffic Cones 1:35

    3D Printed - Modern & SciFi - Traffic Cones 1:35

    Nog 10 op voorraad Binnen 2 dgn verzonden

    Resin Traffic Cones 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:35 miniatures. Scale: 1:35Content: 10x 

    Nog 10 op voorraad Binnen 2 dgn verzonden

    €4,50

  • 3D Printed - Modern & SciFi - Traffic Cones 1:48 3D Printed - Modern & SciFi - Traffic Cones 1:48

    3D Printed - Modern & SciFi - Traffic Cones 1:48

    Nog 10 op voorraad Binnen 2 dgn verzonden

    Resin Traffic Cones 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 32 mm (1:48) miniatures. Scale: 1:48Content: 10x 

    Nog 10 op voorraad Binnen 2 dgn verzonden

    €4,50

  • 3D Printed - Modern & SciFi - Modular Pipes 3D Printed - Modern & SciFi - Modular Pipes

    3D Printed - Modern & SciFi - Modular Pipes

    Nog 9 op voorraad Binnen 2 dgn verzonden

    Resin Modular pipes 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. You can combine this item with our set of 4mm plasticard tubes to make long sections, with which it is fully compatible. You can also use it in combination with our set of damaged modular pipes.   By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:48 - 1:35 miniatures. Scale: 1:48 - 1:35Content: 28x 

    Nog 9 op voorraad Binnen 2 dgn verzonden

    €4,50

  • 3D Printed - Modern & SciFi - Damaged Pipes 3D Printed - Modern & SciFi - Damaged Pipes

    3D Printed - Modern & SciFi - Damaged Pipes

    Nog 10 op voorraad Binnen 2 dgn verzonden

    Resin Damaged pipes 3D printed scenery set for your favourite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. You can combine this item with our set of 4mm plasticard tubes to make long sections, with which it is fully compatible. You can also use it in combination with our set of modular pipes.   By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:48 - 1:35 miniatures. Scale: 1:48 - 1:35Content: 20x 

    Nog 10 op voorraad Binnen 2 dgn verzonden

    €4,50

  • 3D Printed - Modern & SciFi - Traffic Signs 1:48 3D Printed - Modern & SciFi - Traffic Signs 1:48

    3D Printed - Modern & SciFi - Traffic Signs 1:48

    Nog 10 op voorraad Binnen 2 dgn verzonden

    Resin street signs 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. This item includes 20x plasticard profiles, 2.5 mm wide and 50 mm, for holding road signs. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:48 miniatures. Scale: 1:48Content: 18x 

    Nog 10 op voorraad Binnen 2 dgn verzonden

    €4,50

  • 3D Printed - Modern & SciFi - Traffic Signs 1:35 3D Printed - Modern & SciFi - Traffic Signs 1:35

    3D Printed - Modern & SciFi - Traffic Signs 1:35

    Nog 10 op voorraad Binnen 2 dgn verzonden

    Resin street signs 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. This item includes 20x plasticard profiles, 2.5 mm wide and 75 mm long, for holding road signs. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:35 miniatures. Scale: 1:35Content: 18x 

    Nog 10 op voorraad Binnen 2 dgn verzonden

    €4,50

  • 3D Printed Manhole Covers 3D Printed Manhole Covers

    3D Printed Manhole Covers

    Nog 10 op voorraad Binnen 2 dgn verzonden

    Resin Manhole Covers Scenery set for your favorite wargame which could be a fantastic addition to the scenery and terrains of your tabletop games. It is made with 3D printing technology for high-quality, realistic details that enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:48 - 1:35 miniatures. Scale: 1:48 - 1:35Content: 28x 

    Nog 10 op voorraad Binnen 2 dgn verzonden

    €4,50

  • Rolling pin Ancestral Recall Rolling pin Ancestral Recall

    Rolling pin Ancestral Recall

    Nog 1 op voorraad Binnen 2 dgn verzonden

    Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

    Nog 1 op voorraad Binnen 2 dgn verzonden

    €13,00

  • Rolling pin Madness of Cthulhu Rolling pin Madness of Cthulhu

    Rolling pin Madness of Cthulhu

    Nog 2 op voorraad Binnen 2 dgn verzonden

    Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

    Nog 2 op voorraad Binnen 2 dgn verzonden

    €13,00

  • Rolling pin Roman Rolling pin Roman

    Rolling pin Roman

    Nog 1 op voorraad Binnen 2 dgn verzonden

    Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

    Nog 1 op voorraad Binnen 2 dgn verzonden

    €13,00

  • Rolling pin Egyptian Rolling pin Egyptian

    Rolling pin Egyptian

    Nog 2 op voorraad Binnen 2 dgn verzonden

    Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

    Nog 2 op voorraad Binnen 2 dgn verzonden

    €13,00

  • Rolling pin Greek Rolling pin Greek

    Rolling pin Greek

    Nog 2 op voorraad Binnen 2 dgn verzonden

    Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

    Nog 2 op voorraad Binnen 2 dgn verzonden

    €13,00

  • Rolling pin Dark Runes Rolling pin Dark Runes

    Rolling pin Dark Runes

    Nog 1 op voorraad Binnen 2 dgn verzonden

    Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

    Nog 1 op voorraad Binnen 2 dgn verzonden

    €13,00

  • 3D printed set - Plastic Barricades 3D printed set - Plastic Barricades

    3D printed set - Plastic Barricades

    Nog 8 op voorraad Binnen 2 dgn verzonden

    Plastic Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

    Nog 8 op voorraad Binnen 2 dgn verzonden

    €5,25

  • 3D printed set - Metal Barricades 3D printed set - Metal Barricades

    3D printed set - Metal Barricades

    Nog 8 op voorraad Binnen 2 dgn verzonden

    Metal Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

    Nog 8 op voorraad Binnen 2 dgn verzonden

    €5,25

  • 3D printed set - Traffic Lights 70mm 3D printed set - Traffic Lights 70mm

    3D printed set - Traffic Lights 70mm

    Nog 7 op voorraad Binnen 2 dgn verzonden

    Traffic Lights 70mm printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 2x standard + 4x pedestrian (70mm height)Scale: 1:58 - 1:48Content: 6x 

    Nog 7 op voorraad Binnen 2 dgn verzonden

    €5,25

  • 3D Printed set - Bikes 3D Printed set - Bikes

    3D Printed set - Bikes

    Nog 6 op voorraad Binnen 2 dgn verzonden

    Bicycles printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45 x 25 mmScale: 1:58 - 1:48Content: 2x 

    Nog 6 op voorraad Binnen 2 dgn verzonden

    €4,00

  • 3D Printed set - Chain Link Fences 50mm 3D Printed set - Chain Link Fences 50mm

    3D Printed set - Chain Link Fences 50mm

    Nog 6 op voorraad Binnen 2 dgn verzonden

    Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x50mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

    Nog 6 op voorraad Binnen 2 dgn verzonden

    €5,25

  • 3D Printed set - Chain Link Fences 70mm 3D Printed set - Chain Link Fences 70mm

    3D Printed set - Chain Link Fences 70mm

    Nog 6 op voorraad Binnen 2 dgn verzonden

    Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x70mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

    Nog 6 op voorraad Binnen 2 dgn verzonden

    €5,45

  • Open cell XPS foam 10mm Open cell XPS foam 10mm

    Open cell XPS foam 10mm

    Nog 33 op voorraad Binnen 2 dgn verzonden

    XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 10 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

    Nog 33 op voorraad Binnen 2 dgn verzonden

    €2,50

  • Open cell XPS foam 6mm Open cell XPS foam 6mm

    Open cell XPS foam 6mm

    Nog 29 op voorraad Binnen 2 dgn verzonden

    XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 6 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

    Nog 29 op voorraad Binnen 2 dgn verzonden

    €2,30

  • Open cell XPS foam 20mm Open cell XPS foam 20mm

    Open cell XPS foam 20mm

    Nog 30 op voorraad Binnen 2 dgn verzonden

    XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 20 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

    Nog 30 op voorraad Binnen 2 dgn verzonden

    €3,40

  • Open cell XPS foam 30mm Open cell XPS foam 30mm

    Open cell XPS foam 30mm

    Nog 38 op voorraad Binnen 2 dgn verzonden

    XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 30 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

    Nog 38 op voorraad Binnen 2 dgn verzonden

    €4,30

  • Closed cell XPS foam 30mm Closed cell XPS foam 30mm

    Closed cell XPS foam 30mm

    Nog 41 op voorraad Binnen 2 dgn verzonden

    Closed cell XPS foam 30mm | Closed cell extruded polystyrene foam | Blue Board Closed-cell extruded polystyrene foam XPS also called Blue Board or Styrofoam is lightweight, tough, durable, and ideal for crafting terrains such as hills and cliffs, making gaming boards, different model building elements such as bricks, and even buildings, and bases. It is a lightweight and durable material that is easy to work with, making it a popular choice among hobbyists and professionals. Extruded XPS is a closed-cell foam, which means it has a high resistance to moisture and is a good thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other model-building elements, including buildings, bases, and bricks, as well as ideal for making gaming boards, dioramas, and other DIY projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300x30mm Type: closed cell blue board Estimated Density: 36 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glues such as Tuft Glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

    Nog 41 op voorraad Binnen 2 dgn verzonden

    €4,30

  • Basing Set - Infestation Basing Set - Infestation

    Basing Set - Infestation

    Nog 3 op voorraad Binnen 2 dgn verzonden

    Infestation Set With this selection of materials and model paints, you will be able to replicate environments infested by alien creatures. The different pigments, textures, putty, fluorescent vegetation, creatures, and xenomorph structures included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike, these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Red 30ml Martian Textures - Fluor Purple 30ml Fluor Pigments - Green Lime 30ml Fluor Pigments - Fluor Pink 30ml Blood Effects - Prince Tau 17ml Blood Effects - Demon 17ml Splash Gel - Water Effects 30ml Dry Brush Paint - Coral touch 30ml Islandmoss - Light Pink Islandmoss - Violet Martian Fluor Grass - Punkpink Neon Martian Tufts 6mm - On Fire Purple Green Stuff Putty 15cm (6 inches) Resin pieces

    Nog 3 op voorraad Binnen 2 dgn verzonden

    €42,50

  • Basing Set - Avatar World Basing Set - Avatar World

    Basing Set - Avatar World

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Avatar World Set With this selection of materials and model paints you can replicate the effects of alien environments with extravagant Martian plants and strident colors. The different pigments, textures, alien plants, fluorescent Martian vegetation, and hyper-realistic crystals included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Purple 30ml Martian Textures - Fluor Blue 30ml Fluor Pigments - Light Orange 30ml Dry Brush Paint - Ultramarine touch 30ml Dry Brush Paint - Dry Violet 30ml Martian Tufts 6mm - Neon Yeti Blue Martian Tufts 6mm - Neo-Titan Orange Martian Fluor Grass - Wildfire Green Basing Bark Chips Islandmoss - Fuchsia Islandmoss - Grey Resin pieces

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €42,50

  • Styrene sheets - Variety pack x7 Styrene sheets - Variety pack x7

    Styrene sheets - Variety pack x7

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Styrene Plastic Variety pack x7 Styrene is a liquid that binds into chains to form high-impact polystyrene (HIPS) in solid form, which is one of the most commonly used plastics with the common name of Plasticard or Evergreen. HIPS is lightweight and easy to work with, making it a favorite of hobbyists and modelers. Plasticard, also known as modeling plastic, is a versatile material widely used in model railroading, slot cars, prototypes, and various craft and scratch-building applications. It is available in smooth sheets, textured sheets, and profiles, and can be easily cut, shaped, and glued, making it a popular choice for modelers and hobbyists. Plasticard can be made from three main types of materials: ABS, Polystyrene plastic, and uPVC (unplasticized polyvinyl chloride), each with distinct characteristics. This type of material, compared to ABS and uPVC, is especially easy to cut, scratch, and bend, which allows for precise and detailed designs. It can be glued with cyanoacrylate adhesives and specific glue for plastics compatible with this material, creating very strong bonds. Its smooth surface accepts paint well, providing excellent results for finished models. However, this material may not be as durable as ABS when subjected to high stresses. Styrene plastic is used in fantasy modeling, military modeling, slot cars, as well as in model or scale model building or scratch building processes. This set includes: Dimension: 200x300 mm Thickness and Quantity: 3x 0.5 mm, 3x 1 mm and 1x 2 mm Finish: Matte 1 side / Gloss 1 side

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €10,40

  • Sale -6% Army Transport Bag Large Army Transport Bag Large

    Army Transport Bag Large

    Binnenkort weer op voorraad

    The GSW Army Transport Backpack is the backpack version of our Army Transport Bag specifically designed to protect your figures during transport. It can be used on your back, or simply as a travel bag with a cross strap to carry it on your shoulder. The GSW miniatures transport backpack is an essential accessory for wargame players and miniatures collectors. This product stands out for combining functionality, durability, and comfort, providing an optimal solution for transporting and protecting delicate miniatures during travel and relocation. The backpack is made of Oxford fabric, known for its lightness and resistance, which makes it ideal to withstand frequent use and adverse transport conditions. In addition, its padding ensures additional protection against impacts and falls, guaranteeing that the miniatures arrive in perfect condition at their destination. With a capacity to carry more than 200 figures, this backpack is perfect for those who need to carry a large number of miniatures to tournaments, gaming sessions or exhibitions. The miniatures are distributed among four levels, allowing for efficient and accessible organization. This storage system is complemented by removable metalized trays, which make it easy to arrange and access miniatures. The MDF trays have an adhesive metal coating which provides a stable and secure base for the magnetized figures. The backpack includes four trays, as well as 21 adjustable heights, allowing the internal space to be customized according to the specific needs of each user and the size of the miniatures. To ensure the integrity of the backpack and the safety of its contents, the GSW includes a reinforced MDF cabinet. This internal structure provides rigidity and durability, protecting the miniatures from possible crushing or deformation during transport. In addition, the GSW backpack is designed to be extremely versatile in terms of transportation. It can be used as a traditional backpack, carrying it comfortably on the back, or as a travel bag, using a crossbody strap to carry it over one shoulder. Comfort of use is another outstanding feature of this backpack. In addition to its capacity and strength, the GSW is equipped with a long shoulder strap and a top handle, elements that are designed to provide comfortable handling. These details allow the backpack to be lifted and carried with ease, even when fully loaded. For those who need additional space, the GSW backpack offers a modification option. It is possible to remove the first lower removable tray and glue the metalized rubber directly to the base of the drawer. This process involves trimming the rubber with scissors to fit snugly into the base structure. By doing this, the lower level is no longer removable, but you gain a few extra inches of internal space, which can be crucial for carrying larger miniatures or additional accessories. As for its dimensions, the backpack measures 45x30x18 cm, making it compact and easy to handle. Its total weight is 3.2 kg, which makes it light considering its carrying capacity and level of protection. Assembly instructions are included inside the backpack, providing detailed guidance for the correct placement and adjustment of the trays. This ensures that users can set up their backpacks efficiently and safely, making the most of the available space. Includes: 1x Warhammer backpack 1x Complete cabinet 4x Trays +4x adhesive metallized rubber sheet Warning: This carrying case must protect your wargame armies, so it is absolutely necessary to reinforce the assembly with PVA glue.

    Binnenkort weer op voorraad

    €72,50€68,00

  • Stained Glass - Vampire Large Stained Glass - Vampire Large

    Stained Glass - Vampire Large

    Nog 6 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 6 op voorraad Binnen 2 dgn verzonden

    €7,65

  • Stained Glass - Elven Large Stained Glass - Elven Large

    Stained Glass - Elven Large

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €7,65

  • Stained Glass - Knight Large Stained Glass - Knight Large

    Stained Glass - Knight Large

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €7,65

  • Stained Glass - Demonic Large Stained Glass - Demonic Large

    Stained Glass - Demonic Large

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €7,65

  • Stained Glass - Skeleton Large Stained Glass - Skeleton Large

    Stained Glass - Skeleton Large

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €7,65

  • Stained Glass - Vampire Small Stained Glass - Vampire Small

    Stained Glass - Vampire Small

    Nog 5 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 5 op voorraad Binnen 2 dgn verzonden

    €7,65

  • Stained Glass - Elven Small Stained Glass - Elven Small

    Stained Glass - Elven Small

    Nog 8 op voorraad Binnen 2 dgn verzonden

    Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

    Nog 8 op voorraad Binnen 2 dgn verzonden

    €7,65

New Arrivals
Close