New Arrivals

Traffic Lights 70mm printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 2x standard + 4x pedestrian (70mm height)Scale: 1:58 - 1:48Content: 6x 

Read more less

Bicycles printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45 x 25 mmScale: 1:58 - 1:48Content: 2x 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x50mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x70mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 10 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 6 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

XPS extruded polystyrene foam | Open-Cell XPS Foam Open-cell XPS extruded polystyrene foam, also called Styrofoam, is a lightweight, strong, durable, and less dense material than its sister closed-cell XPS foam in blue, giving it a "low memory" effect that is ideal for marking, engraving, texture transfer, scratching, and roughing. Open-Cell XPS Foam can be used to create various scenery such as hills and cliffs, game boards, different model building elements such as bricks, or even columns and large bases for dioramas. It is a lightweight and durable material that is easy to work with, making it a popular choice among amateurs and professionals. The texture to the touch of this material is reminiscent of very fine sandpaper, so for painting, it is recommended to post-process it by applying a protective coating or surface sealer such as our Medium Decoupage. Unlike blue XPS foam, this open-cell material can be engraved with textured rollers or carved with a modeling tool for sculpting.  Open-cell extruded XPS also has great moisture resistance and works very well as a thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other modeling elements, such as buildings, bases, and bricks, as well as being ideal for making game boards, dioramas, and other craft projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300mm Thickness: 20 mm Type: Open-cell Estimated Density: 33 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glue such as tuft glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

Closed cell XPS foam 30mm | Closed cell extruded polystyrene foam | Blue Board Closed-cell extruded polystyrene foam XPS also called Blue Board or Styrofoam is lightweight, tough, durable, and ideal for crafting terrains such as hills and cliffs, making gaming boards, different model building elements such as bricks, and even buildings, and bases. It is a lightweight and durable material that is easy to work with, making it a popular choice among hobbyists and professionals. Extruded XPS is a closed-cell foam, which means it has a high resistance to moisture and is a good thermal insulator. This makes it an excellent choice for creating terrains, landscapes, and other model-building elements, including buildings, bases, and bricks, as well as ideal for making gaming boards, dioramas, and other DIY projects. There are several tools you can use to shape and cut it. One of the most common tools is a hot-wire cutter, which is a handheld device that heats a wire to cut through the foam. A hot knife is another tool that uses heat to cut through the foam, but it is more precise than a hot-wire cutter and is ideal for creating intricate details. Saws and knives can also be used to cut through this material. A hand saw or jigsaw is ideal for cutting through larger pieces of foam, while a sharp utility knife or craft knife can be used to make smaller cuts and details. When working with this material, it is essential to take safety precautions as this material can release toxic fumes when heated or sanded vigorously. It is important to wear a fume mask or work in a well-ventilated area to avoid inhaling the fumes. Content: 200x300x30mm Type: closed cell blue board Estimated Density: 36 kg/m³ WARNINGS: Extruded polystyrene XPS is capable of giving off toxic fumes when heated. That heating can be achieved when hot-wire cutting, vigorously sanding, and also by application of hot glue. This foam should never be worked in an enclosed environment or without wearing a graded fume mask. Cutting styrofoam with an electric saw will also melt and produce fumes. Always use appropriate glues such as Tuft Glue or hot glue to stick styrofoam together. Standard PVA glue or white glue will only stick this foam where they have contact with the air, where air cannot reach the glue then the glue will NOT set and remain liquid. Dust produced when sanding or cutting styrofoams with a saw is also hazardous and should be avoided by wearing a dust mask and using appropriate ventilation and other safety measures. The safe maximum use temperature of extruded polystyrene foam XPS is 75 degrees Celsius (167º Fahrenheit).

Read more less

Infestation Set With this selection of materials and model paints, you will be able to replicate environments infested by alien creatures. The different pigments, textures, putty, fluorescent vegetation, creatures, and xenomorph structures included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike, these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Red 30ml Martian Textures - Fluor Purple 30ml Fluor Pigments - Green Lime 30ml Fluor Pigments - Fluor Pink 30ml Blood Effects - Prince Tau 17ml Blood Effects - Demon 17ml Splash Gel - Water Effects 30ml Dry Brush Paint - Coral touch 30ml Islandmoss - Light Pink Islandmoss - Violet Martian Fluor Grass - Punkpink Neon Martian Tufts 6mm - On Fire Purple Green Stuff Putty 15cm (6 inches) Resin pieces

Read more less

Avatar World Set With this selection of materials and model paints you can replicate the effects of alien environments with extravagant Martian plants and strident colors. The different pigments, textures, alien plants, fluorescent Martian vegetation, and hyper-realistic crystals included in this basing set will allow you to customize your model or diorama, giving a touch of realism and originality to the scene. Perfect for beginners and hobbyists alike these modeling and wargaming materials will help you bring your idea to life. Contains: Martian Textures - Fluor Purple 30ml Martian Textures - Fluor Blue 30ml Fluor Pigments - Light Orange 30ml Dry Brush Paint - Ultramarine touch 30ml Dry Brush Paint - Dry Violet 30ml Martian Tufts 6mm - Neon Yeti Blue Martian Tufts 6mm - Neo-Titan Orange Martian Fluor Grass - Wildfire Green Basing Bark Chips Islandmoss - Fuchsia Islandmoss - Grey Resin pieces

Read more less

Styrene Plastic Variety pack x7 Styrene is a liquid that binds into chains to form high-impact polystyrene (HIPS) in solid form, which is one of the most commonly used plastics with the common name of Plasticard or Evergreen. HIPS is lightweight and easy to work with, making it a favorite of hobbyists and modelers. Plasticard, also known as modeling plastic, is a versatile material widely used in model railroading, slot cars, prototypes, and various craft and scratch-building applications. It is available in smooth sheets, textured sheets, and profiles, and can be easily cut, shaped, and glued, making it a popular choice for modelers and hobbyists. Plasticard can be made from three main types of materials: ABS, Polystyrene plastic, and uPVC (unplasticized polyvinyl chloride), each with distinct characteristics. This type of material, compared to ABS and uPVC, is especially easy to cut, scratch, and bend, which allows for precise and detailed designs. It can be glued with cyanoacrylate adhesives and specific glue for plastics compatible with this material, creating very strong bonds. Its smooth surface accepts paint well, providing excellent results for finished models. However, this material may not be as durable as ABS when subjected to high stresses. Styrene plastic is used in fantasy modeling, military modeling, slot cars, as well as in model or scale model building or scratch building processes. This set includes: Dimension: 200x300 mm Thickness and Quantity: 3x 0.5 mm, 3x 1 mm and 1x 2 mm Finish: Matte 1 side / Gloss 1 side

Read more less

Immerse yourself in the fascinating world of Dungeon and Dragons, wargames and other board games with our miniature DnD coins, designed to bring an authentic and detailed touch to your adventures. Made from an innovative combination of plant fibers and aluminum, these micro coins are microplastic compliant, ensuring your gaming experience is both immersive and environmentally friendly. DnD coins feature a 3mm diameter, a size carefully chosen to offer maximum versatility and realism in your games. The round shape of each coin, together with its antique gold color, brings a genuine appearance that evokes the feeling of handling real ancestral treasures. The reflections on their surface enhance this perception, creating a subtle sheen that makes them stand out in any gaming scenario. They can be easily painted with acrylic paints and inks, allowing you to add unique details to suit the theme of your campaign or game. The ability to be glued with white glue or tuft glue makes them easy to integrate into dioramas, game boards or even as part of custom miniatures, offering unparalleled flexibility. Imagine your players finding a treasure chest full of treasure, the excitement on their faces as they feel the weight and see the glow of their reward. These micro coins are not only an impressive visual addition, but can also be used as game elements, markers or even as rewards in tournaments and special events. Contains: 20 grams net

Read more less

A gaming supplement for Warhammer Age of Sigmar Contains updated season rules and battle tactics for Matched Play games of Warhammer Age of Sigmar Includes the Core Rules, advanced rules, and more The pack also includes a deck of handy reference cards, and 6 objective markers War spreads across the Great Parch of Aqshy like an unstoppable inferno. Skaven swarm out from the twisted hellscape of the Gnaw, and the lands that border the Heartblood Sea are subjected to near-constant raids from blood-crazed killers. This is only a taste of what is to come, for armies from far afield are converging upon this ravaged land in search of plunder and glory.Your Guide to Matched Play in the Mortal RealmsThe General's Handbook 2026-27 contains essential rules for fighting Matched Play battles in the war-torn setting of the Mortal Realms, where you can achieve glory on the battlefield in contests of skill and generalship against fellow players.In this box you will find a battlepack that makes it simple to set up Matched Play games of Warhammer Age of Sigmar, from picking a battleplan to preparing the battlefield. This is the easiest way to structure and balance your games. Whether playing a one-off game or competing in a Grand Tournament, you’ll be able to quickly get to the business of proving who is the superior general.This 72-page softcover book contains:– A brief background section bringing you up to speed with the latest narrative events in Warhammer Age of Sigmar.– Matched Play Battlepack 2026-27, including a section on special rules for linking games together into Aqshian Crusades.– Rules for Battle Tactics and information detailing how to score extra victory points by completing the objectives on battle tactics cards you choose when you assemble your army.– A blank army roster and tournament scoring sheet to keep track of important information throughout the game, such as victory points and battle tactics.– 12 brand-new Matched Play battleplans.– The Warhammer Age of Sigmar Core Rules, reprinted here for reference during your games. A rules glossary is also included at the back of this book.– Advanced Rules for applying to Matched Play battlepacks, including Commands, Terrain, Magic, Army Composition, and Command Models.This pack also contains the following:– 1 deck of battlepack cards, including 1 rules reference card, 6 battle tactics cards and 6 battleplan cards. The cards measure 161.1mm by 107.1mm.– 6 objective mats featuring a 40mm central objective. They are each 192.4mm in diameter and feature a top made from a polyethylene terephthalate (PET) material with a matte finish and a flocked underside to reduce slippage on the gaming surface.The book also contains a one-use code to unlock battleplans, tactics, season rules, and updated rules modules content in Warhammer Age of Sigmar: The App.

Read more less

An essential book, filled with rules and lore for Warhammer Age of Sigmar Supports various game modes, including the Spearhead format, narrative Path to Glory campaign system, and more Drives the ever-evolving narrative onwards into the Hour of Ruin and the relentless Skaven invasion of the Mortal Realms This book contains the same contents as the Core Book found in the Warhammer Age of Sigmar: Skaventide boxed set This is the time of turmoil. This is the era of war. This is the Age of Sigmar!Since the breaking of Sigmar's Tempest, the peoples of the Mortal Realms have fought tooth and nail for those islands of civilisation they have established. Every city is blackened by the fires of war, every populace harrowed by the ordeal of simple survival. But now, the Hour of Ruin has come, the fabric of reality splitting as numberless hordes of rat-like Skaven capsize decades of progress.Yet, the hosts of Sigmar are still marching. They know full well that the cycle of endless war is inescapable, taking its toll on even the mighty Stormcast Eternals. But though the candle of hope gutters, it burns bright enough to inspire a thousand selfless acts.The BookThis 288-page hardback book is the ultimate companion for all players of Warhammer Age of Sigmar, whether veterans or novices. It contains everything you need to know to collect, build, paint, and play with Citadel miniatures in the Mortal Realms.The Warhammer Age of Sigmar HobbyThe book opens with an introduction to the Warhammer hobby. Alongside the concept of the game, this section discusses the various aspects of the hobby, including collecting an army, building and painting miniatures, playing Warhammer Age of Sigmar, and choosing your way to play.The Mortal RealmsThis section provides a comprehensive overview of each realm and its current state, with the narrative presented from the perspective of the realm's inhabitants, such as soldiers, witch hunters, and more.History of the RealmsGet a primer of the key narrative events from the history of Warhammer Age of Sigmar, including summaries of key events such as the awakening of Kragnos and the Twin-Tailed Crusade.Factions at WarA background overview of the various factions from each Grand Alliance – Order, Chaos, Death, and Destruction. You'll find incredible artwork, a miniatures showcase, and additional information about key characters or important pieces of lore.The RulesThe book's Rules section is divided into three major sections: Core Rules, Advanced Rules, and a Glossary. You'll also find an overview of Battlepacks, making it easy to understand which ones best suit how you like to play. Finally, there are rules for terrain, and the various game formats, such as Spearhead, Path to Glory, and Matched Play.The Core Book closes with a handy, alphabetised rules index and a Path to Glory roster, Order of Battle, and Army roster. It also features a red ribbon bookmark.

Read more less

Mirror Spray Paint 400ml Chrome spray paint is a specialized aerosol designed to create a reflective, mirror-like finish on various surfaces. This type of Mirror Spray Paint contains fine metallic particles suspended in a solvent-based medium, which, when applied, align to produce a shiny, chrome-like appearance. It is commonly used in automotive, decorative, and DIY projects to achieve the look of chrome plating without the associated costs and complexities. Mirror spray paint is versatile and can be applied to various surfaces, including metal, plastic, and wood. This adaptability makes it ideal for numerous applications, ranging from automotive parts and accessories to home décor and DIY projects. However, to achieve the best results on different materials, it may be necessary to use specific preparation techniques, such as applying primers designed for the particular type of surface, whether plastic or metal. The final appearance of the mirror spray paint will significantly depend on the color and texture of the surface being painted. To achieve a consistent and reflective finish, it is highly recommended to apply a glossy black primer before starting the painting process. This step ensures that the metallic particles in the paint align correctly, enhancing the reflective properties and providing a smoother, mirror-like finish. The texture of the base surface also plays a crucial role in the final result, so: A matte black base will produce a burnished metal lookA satin black base will result in a nice silver metallic finish.For the most mirror-like effect, a glossy black base is essential. This glossy undercoat will maximize the reflective quality of the paint, creating a true mirror effect. INSTRUCTIONS FOR USE: - Shake the can properly before each use.- Do not apply too much paint in one spot to avoid the "eye cat effect". This type of paint should be applied with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Keep the spray at 90º during use. - Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers. WARNINGS: Keep out of children's reach.Keep away from heat/sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove the person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x225 mmContent: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Read more less