New Arrivals

Vampires are foul beings who prey upon others to feed their immortality. Most drink blood, but some feed upon the very essence of the soul. Multiple lifetimes and the plunder of countless victims means most Vampires amass huge wealth, and many dwell in looming castles and mansions deep within the Vauhaemian wilds. When prey becomes scarce or boredom infests the barren vessel where their soul once was, Vampires will gather their servants and depart for the wilds of ArcWorlde to find fresh game. These marauding villains gather with groups of their kin to hunt prey and loot treasure to add to their hoards. These Heroic 28mm/32mm scale fantasy miniatures are cast in Warp Miniatures' fine resin or white metal and are provided unpainted and unassembled. Plastic bases are included.

Read more less

Vampires crave wealth and often amass huge estates over countless mortal lifetimes. It is common for them to hire unfortunate mortal servants to oversee the every-day running of their domains. These fellows, often outcasts from surrounding peasant villages, are pitifully loyal to their fell masters and will dedicate their sorry lives to serving their undead overlords with every fibre of their being. When travelling abroad, Vampires will bring their Manservants along with them to carry all the necessities a creature of darkness requires. It is also their lot to procure victims to satiate their master’s hunger, and to serve them up with a smile. These Heroic 28mm/32mm scale fantasy miniatures are cast in Warp Miniatures' fine resin or white metal and are provided unpainted and unassembled. Plastic bases are included.

Read more less

"A common sight in the corridors of the Grand College, these enchanted suits of armour silently stand guard, ready to leap into action at the merest hint of danger. Many wandering Wizards borrow these automatons to keep them safe on their adventures, or else construct them themselves from materials they find in the field. If damaged, or destroyed, they often pull themselves back together again in time." These Heroic 28mm/32mm scale fantasy miniatures are cast in Warp Miniatures' white metal and are provided unpainted and unassembled. Plastic bases are included.

Read more less

"There are many horrible things flapping about the Blasted Wastes. One must only look to the skies to see a plethora of hungry, winged monstrosities swooping around looking for their next meal. Some of these creatures grow to monstrous sizes, and the denizens of the Blasted Wastes must be wary, lest they are carried aloft by grasping talons.The Dark Lords often bind the largest of these to their immeasurable will, sending them into battle as beasts of war. Sometimes their talons are put to a different use, and many a brave Hobgoblin is borne into the air to fire down from above.” These Heroic 28mm/32mm scale fantasy miniatures are cast in Warp Miniatures' fine resin and are provided unpainted and unassembled. Plastic bases are included.

Read more less

10 plastic miniatures for Kill Team A complete kill team of bellicose and blessed Adepta Sororitas operatives Features multiple options for special weaponry and equipment Includes a sheet of 43 tokens to keep track of in-game effects and equipment Celestian Insidiants are trained to tolerate exposure to null energy, which they use to silence and ultimately slay witches, sorcerers, and other perfidious psykers. While all Adepta Sororitas abhor the witch, the Insidiants take this hatred to the extreme.Fanatical Witch SlayersThis multipart plastic kit builds 10 Celestian Insidiants operatives. These miniatures can be used as pious Celestian Insidiants warriors in games of Kill Team, or fielded in an Adepta Sororitas army in games of Warhammer 40,000. The kit includes options, accessories, and different heads to customise your kill team, plus components to build special operatives.This kit builds 10 multipart plastic Adepta Sororitas miniatures:– 1 Superior– 1 Denuncia (can alternatively be built as a Warrior)– 1 Censor (can alternatively be built as a Warrior)– 1 Reliquarius (can alternatively be built as a Warrior)– 1 Abjuror (can alternatively be built as a Warrior)– 1 Mortisanctus (can alternatively be built as a Warrior)– 2 Cremators (can each alternatively be built as a Warrior)– 2 WarriorsThe Superior has 4 head options and can be armed with a stakethrower or inferno pistol. The kit includes 11 helmeted heads and 9 bare heads that can be used interchangeably across the miniatures.Contents:– 145 plastic components– 10 Citadel 32mm Round Bases– 1 Adepta Sororitas Transfer Sheet– 1 Celestian Insidiants token sheet– 1 construction guideThe Adepta Sororitas Transfer Sheet features 290 high-quality waterslide transfers. These include icons for the Order of Our Martyred Lady, Order of the Ebon Chalice, Order of the Bloody Rose, Order of the Sacred Rose, Order of the Argent Shroud, and Order of the Valorous Heart. There are also other blessed sigils and text for you to decorate your miniatures.The Celestian Insidiants token sheet includes 43 double-sided tokens, so you can keep track of your equipment and in-game effects in the heat of battle.These miniatures require assembly and are supplied unpainted. We recommend:– Citadel Tools: Super Fine Detail Cutters– Warhammer Colour Plastic Glue– Warhammer Colour paintsRules for using these miniatures in your games of Kill Team can be downloaded for free from the Warhammer Community website.

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Read more less

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 6x

Read more less

Airbrush spray booth filter set Airbrush spray booth filters are an essential accessory for keeping your workspace cleaner while maintaining strong extraction performance during every painting session. This filter set includes 2 polyester filters (5 µm) designed to capture overspray, paint particles, and airborne residue generated when using an airbrush. With a basis weight of 180 g/m², they provide an effective balance between filtration and airflow, helping your spray booth deliver reliable performance for miniature painting, scale modeling, crafts, and other hobby projects. Made from polyester and sized at 385 x 180 mm with a thickness of 20 mm, these replacement filters offer excellent coverage and a practical fit for regular hobby use. Their structure helps maintain proper airflow while trapping fine airborne particles, which is essential for consistent extraction and day-to-day efficiency. Replacing them regularly helps protect the internal components of your spray booth, reduces paint residue buildup, and keeps your setup working more effectively over time. These replacement filters are a direct fit for GSW Airbrush Spray Booths and are also compatible with many other spray booth models, making them a versatile option for hobbyists looking for dependable spare parts. Whether you paint miniatures, scenery, scale models, or custom projects, fresh filters help your spray booth perform at its best and keep your painting area cleaner, safer, and more comfortable. Content: 2x polyester filters (5 µm)

Read more less

Portable airbrush spray booth for painting miniatures, crafts, and scale models by Green Stuff World  Portable airbrush spray booth An Airbrush Spray Booth for airbrushing and modeling is an essential tool for hobbyists when using an airbrush who want a cleaner, more comfortable, and more controlled painting environment. Designed for miniatures, scale models, scenery, crafts, and other creative projects, this portable spray booth helps capture overspray and airborne paint particles while keeping your workspace more organized. Its compact structure makes it a practical solution for both home hobby rooms and temporary painting setups. This model features a foldable and extendable design with a rear pipe that can be connected to a window outside your hobby room to keep the air clean, making it easy to store when not in use and quick to set up whenever you need it. With a folded size of 40.5 x 22 x 27 cm and an unfolded size of 40.5 x 43.3 x 33 cm, it offers a smart balance between working area and portability. Weighing just 4.75 kg, it is lightweight enough to move around easily, while the integrated top handle adds extra convenience for transport and storage. It includes built-in interior LED lighting, providing clear and consistent illumination while you work so you can see colours, details, and paint coverage more easily during every session. This integrated light source helps improve visibility inside the working area, making it easier to spot fine details, control shading and highlights, and paint with greater comfort and precision, even in rooms with limited ambient light. The booth is equipped with high-density polyester filters 5 µm designed to capture most paint particles and moisture generated during airbrushing. This helps reduce overspray in the surrounding area and contributes to a cleaner painting station. The fully translucent booth design also improves visibility while you work, and for users painting larger models or projects, two units can be combined to create a wider working area with greater flexibility. Do I need a spray booth for airbrushing? If you paint regularly indoors, the answer is, yes, you do need a spray booth for airbrushing. A spray booth helps contain overspray, reduces the amount of paint residue floating around your hobby room, and makes airbrushing more comfortable over long sessions. It is especially useful for miniature painters, model makers, and crafters who want to protect their work area, improve cleanliness, and maintain better working conditions while painting. This spray booth is also designed with ease of use in mind. It includes an on/off switch with an indicator light that shows when the unit is powered on, making operation simple and intuitive. A turntable is included as well, allowing you to rotate models smoothly while painting and reach different angles more easily without constantly handling the piece. With a low operating noise of around 45 dB, it provides efficient extraction while remaining pleasantly quiet for regular hobby use. In terms of performance, the unit delivers an air flow of 5.2 m³/min and uses a DC 12V 1.6A motor, with an input of AC 100–240V / 50–60Hz and voltage, frequency, and plug adapted according to the destination country. This makes it a versatile and reliable choice for hobbyists looking for an effective, portable, and user-friendly airbrush spray booth. Whether you are painting miniatures, scale models, terrain, or custom projects, it offers a practical way to improve your airbrushing setup. It also includes a turntable, filters, and flexible exhaust hoses.  Content: 1x Instructions Technical specifications Feature Value Type Portable foldable airbrush spray booth Application Airbrushing, miniature painting, scale modeling, crafts, and hobby projects Air Flow 5.2 m³/min Motor DC 12V / 1.6A Plug type European Input AC 100–240V / 50–60Hz Noise Level Approx. 45 dB Folded Dimensions 40.5 x 22 x 27 cm Unfolded Dimensions 40.5 x 43.3 x 33 cm Net Weight 4.75 kg Filter Type High-density filter for paint particles and moisture Extra Features Foldable design, translucent booth, illuminated on/off switch, turntable, and top handle Compatibility Voltage, frequency, and EU plug Brand Green Stuff World   ✅ This is for you if... You paint miniatures, scale models, terrain, or crafts with an airbrush and want a cleaner, more controlled workspace. You need a compact and lightweight spray booth that can be folded away easily when not in use. You want to reduce overspray and airborne paint particles while working indoors. You value a quieter setup, with noise levels around 45 dB, for more comfortable hobby sessions. You want a practical booth with helpful accessories such as a turntable, carry handle, and illuminated power switch. You occasionally work on larger projects and like the option of combining two translucent booths for more space. ❌ This is NOT for you if... You only paint with traditional miniature paint brushes and do not use an airbrush at all. You need an industrial-grade extraction system for heavy commercial or professional workshop use. You regularly work with very large pieces and need a permanently oversized spray booth. You are looking for a spray booth designed for solvent-heavy industrial painting rather than hobby and modeling applications. You do not have enough workspace to unfold the booth to its full operating size. Frequently Asked Questions Do I really need a spray station for miniature painting?If you paint indoors on a regular basis, it is highly recommended. A good extraction unit helps capture overspray, reduces floating paint particles, and keeps your workspace cleaner and more comfortable during long sessions. What does a paint extraction cabinet actually do?Its main job is to pull in overspray, paint mist, and airborne residue through a filter system. This helps prevent color particles from spreading around your hobby area and improves working conditions while spraying. Can I use it for miniatures, scale models, and scenery?Yes. These units are suitable for miniatures, scale models, terrain pieces, dioramas, cosplay parts, crafts, and many other hobby projects that involve spray painting. Does it remove fumes completely?No. It helps capture paint particles and reduce airborne residue, but it does not make harmful vapors disappear completely. Good room ventilation is still important, especially when using solvent-based products. Is it only useful for advanced hobbyists?Not at all. It is just as useful for beginners as it is for experienced painters. In fact, new users often benefit the most because it helps keep the painting area tidy and easier to manage from the start. How often should I replace the filter?That depends on how often you paint and how much material you spray. If the filter looks saturated, airflow drops, or paint residue starts building up faster than usual, it is time to clean or replace it. Can I use acrylics, primers, and varnishes in it?Yes, it is commonly used with acrylic paints, primers, varnishes, inks, and similar hobby products. You should still check the product you are spraying and make sure your setup is appropriate for that type of material. Is a foldable model strong enough for regular use?Yes, provided it is well-made and used correctly. GSW's compact foldable design is very practical for hobbyists who need to save space without giving up a dedicated spraying area. Does a quieter unit still work well?Yes. A lower noise level does not automatically mean weak performance. Many modern hobby spray stations are designed to offer a good balance between airflow, comfort, and everyday usability. Will it keep my room perfectly clean?It helps a lot, but no extraction system keeps a room perfectly spotless. It reduces mess and overspray significantly, especially compared to spraying without any protection at all. What should I look for before buying one?The most important things are airflow, filter quality, working area size, noise level, portability, ease of storage, and whether it suits the kinds of models and projects you normally paint.

Read more less

A MIGHTY TOME TO EXPAND YOUR BARONS' WAR EXPERIENCE! The reign of King John (1199-1217) was a tumultuous turning-point in the history of England. Decades of tension with the kings of France boiled over into conflict which saw Normandy, Brittany and Anjou lost. Meanwhile the fractious and restive rulers of Wales sought to exploit any sign of weakness and the kings of Scotland cast covetous eyes on Northumbria. At centre stage was King John, a figure whose distrusting nature made him as ungrateful to his allies as he was spiteful to his enemies. Resentment, hatred and fear pushed many of England's barons into armed defiance, leading to the Magna Carta, an unprecedented compromise limiting royal power. When it was quashed by the Pope, civil war followed. The Barons' War: King John brings these turbulent times onto the tabletop. It updates the Feudal European retinue list and introduces six more factions to the game: the light and flexible Welsh, the diverse and colourful Scottish, the aggressive Poitevins and the proudly disciplined Flemish, as well as hard-bitten professional Mercenaries and the cunning and desperate Outlaws. The hardcover 246 page sourcebook also provides rules and background for a score of the dramatis personae of the story, enabling you to command your troops with the vindictive King John, the chivalrous William Marshal and the scheming King Philip Augustus - or even Robin Hood and his Merry Men. Ten historical scenarios allow you to re-tell the bloody story of King John's reign, from bitter clashes in the Welsh Marches to the king's harrying of his enemies. You can recreate the titanic pitched battle of Bouvines or follow the stages of the climatic battle of Lincoln. Whichever side you take, there will be something for you in the first supplement for the new edition of The Barons' War.

Read more less

20 plastic multi-part Tribal models.28mm sized, supplied unpainted and require assembly with glue.Tribals Frame Designed to be used in the game Frostgrave: Ghost Archipelago, as either opponents to a Heritors Warband, or as a Tribal warband exploring the Ghost Isles.Includes 20 round bases.

Read more less

20 plastic multi-part Snake-men models.28mm sized, supplied unpainted and require assembly with glue.Snake-men Frame Designed to be used in the game Frostgrave: Ghost Archipelago, as either opponents to a Heritors Warband, or as a Snake-man warband exploring the Ghost Isles.

Read more less

There is no shortage of trained seamen who will happily sign-on to a Heritor’s expedition to the Ghost Archipelago. The lure of wealth and adventure make it a much more desirable billet than working on a merchantman, and, compared to piracy, it is a legal, if no less dangerous, occupation. More difficult to recruit are the specialist fighters whose skills may prove vital when exploring the Lost Isles. These men and women require large retainers and demand their own cabins when they can be convinced to join an expedition.Twenty plastic crewmen for Ghost Archipelago. Ghost Archipelago Crewmen Frame Each plastic frame has multiple weapon choices for you to design unique crew to accompany your Heritor and Warden into the Ghost Archipelago.28mm sized plastic figures, unpainted and require assembly using glue.

Read more less

28mm Dark Age & Medieval Farm Animals - Pillage The Farm Yard   Drive off your enemy’s livestock or defend your farm from raiders.This set contains a huge selection of Dark Age and Medieval farm animals perfect for Pillage scenarios, objectives, or adding life and realism to your tabletop. Ideal as lootable livestock in Pillage or as scenery for any historical or fantasy wargame. What’s included? 104 Farm Animals: 16 Sheep 8 Goats 4 Donkeys 4 Horses 4 Calves 8 Cows 20 Chickens 24 Geese 4 Piglets 4 Sows 4 Pigs 4 Lambs The livestock animals of the Dark Ages and Medieval periods looked quite different to the breeds we have today which have constantly been tampered with to create animals that provide higher yields of meat and milk for farmers. So we had to do quite bit of research into what animals were available in the 8th to 12th centuries and what are the closest references we have available.   The sheep breed we chose is the Jacobs sheep. It was introduced to Britain by the Romans. It is a small breed only coming up to the knees on a human. But it was a hardy animal which was well suited to the wet Western European climate. We have some females a lamb and also a ram to keep the sheep happy!   The Goat breed is an Old English primitive goat and date back to around 3000BC. It is a small breed but very hardy and suited to cold and rough environments and has spectacular horns.   For the Horse we chose a Breton horse breed. Very much akin to the English shire horse in being bulky and full of muscle and very suited to agricultural work.   For Cows we went back to the Highland cow for reference which is a close relative of early domesticated cattle. It is short but stocky and very hardy for harsh winters and produces good milk and meat. We created a little family with a Cow, Bull and little lowing calf.   Lastly we have the pigs. These were a bit tricky to research. Medieval pigs tended to be more closely related to the wild Boar and had longer snouts, longer legs and were hairier. Thankfully we found a farm that is retro breeding pigs back towards the Boar to create a more Medieval and Iron Age breed. These were ideal for reference and we created a Sow, Boar and piglet family.

Read more less

Natural variety for forest and meadowOre Mountain Glade perfectly complements existing forest and meadow basecovers and is ideal for creating denser, rougher undergrowth. The mix produces realistic surfaces with added depth and texture—perfect for varied and lifelike bases. Fast and high-quality basingThis basecover offers a simple solution for achieving professional-looking bases in no time. Whether you're working on a small warband or a large army, you can create natural and detailed surfaces for a wide range of themes with just a few steps. Easy applicationSimply apply glue to your base and sprinkle the mix on top, or press the base directly into it. This quickly creates a natural, irregular texture exactly where you want it—simple and effective. Versatile useIn addition to basing, Ore Mountain Glade is also ideal for building terrain pieces or detailed dioramas. The carefully balanced, hand-mixed blend opens up a wide range of creative possibilities. ContentsBasecover “Ore Mountain Glade” (140 ml)Resealable plastic container for clean and easy handlingOne mix, endless possibilities—for realistic natural bases and creative hobby projects.

Read more less

Malifaux, a twisted mirror of an alternate Earth in the 1900s; a world of gothic horror, Victorian structures, steampunk constructs, and wild west gunslingers. Rife with undead amalgamations, monstrous vengeful apparitions, and other creatures that bump in the night, these near-lawless lands are still worth treading for some, as the Soulstones deep within the cavernous catacombs are worth more than the sweat and blood it takes to obtain them. The creatures that humanity has dubbed the Neverborn are the native inhabitants of Malifaux. Some are the twisted descendants of the world's original occupants, while others are nightmarish ghouls created through bizarre spells or magically-enhanced evolution. Many Neverborn believe that humanity is a scourge that must be cleansed, but those rare few believe that they have an important role in this world’s greater schemes. Only time will tell. Contents: 1x The Dreamer, Fast Asleep Miniature 1x Lord Chompy Bits, Dreamlord Miniature 1x Coppelius Miniature 3x Alps Miniatures Please Note: Miniatures are supplied unpainted, and some assembly may be required. Printed materials are supplied in English.

Read more less

Welcome to Malifaux! Malifaux, a twisted mirror of an alternate Earth in the 1900s; a world of gothic horror, Victorian structures, steampunk constructs, and wild west gunslingers. Rife with undead amalgamations, monstrous vengeful apparitions, and other creatures that bump in the night, these near-lawless lands are still worth treading for some, as the Soulstones deep within the cavernous catacombs are worth more than the sweat and blood it takes to obtain them. It might start with an itch, a whisper; a need to be scratched, screamed or delivered. The Resurrectionists, like the stitches and sutures that keep their corpses together, are grave robbers, serial killers, and innovators that are loosely bound together by common enemies, goals, and the voice in their heads. Most have retreated to places like the Quarantine Zone or the sewers, where their practices are judged not by their peers, but more often worshipped. Able to Manipulate and master the inevitability of death, The Resurrectionists are difficult to put down. as they keep getting right back up. Contents: 1x Yan Lo, The Spirit Walker Miniature 1x Yin, The Penangalan Miniature 1x Manos, The Risen Miniature 1x Toshiro, The Daimyo Miniature Please Note: Miniatures are supplied unpainted, and some assembly will be required.

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Read more less

Plastic Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Metal Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Traffic Lights 70mm printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 2x standard + 4x pedestrian (70mm height)Scale: 1:58 - 1:48Content: 6x 

Read more less

Bicycles printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45 x 25 mmScale: 1:58 - 1:48Content: 2x 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x50mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less

Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 50x70mmScale: 1:58 - 1:48Content: 5x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Read more less