AK Interactive
Natural Leaves & Plants Neutral Protection 250ml
This product is a preservative for reusable natural plants. You just need to put the branch or the small plant in the container with the product overnight and the sap will be replaced by the agent getting it to remain undamaged or wither in our diorama. The plants can be painted with acrylics in order to avoid that t plants color can be weakened over time by the elimination of chlorophyll. The jar is wide enough to put the plants without difficulty. Volume: 250ml
€9,45
-
Grass Flock 2mm Dry
High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales). Artificial or static grass is one of the most commonly used products in any modeling genre. This color is perfect for representing dry grass. Different colors may be mixed to obtain a finish which is appropriate for reproducing the intended season of the year. To use the product, apply a mixture of water and PVA glue on the surface and then sprinkle the grass onto this. Once dry, it may be painted with an airbrush and/or enamel or oil washes may be applied until the desired effect is achieved. Contents: (250 ml.
€5,65
-
Splatter Effects Stirred Earth 100ml
Special effects for splashes on vehicles, dioramas and vignettes. Its composition allows an easy handling with brush achieving a very realistic texture and effect on the lower parts of the vehicles. Special consistency for splash effects. Ideal for adding the finishing touches of texture to the underside of your model or terrain. Can be splattered using a brush and stick or by directing the airflow from your airbrush over the brush to project it onto an area. It can be thinned with water or an acrylic thinner to improve its fluidity. Non-toxic.
€6,60
-
Standing Water
This is a two-component colored resin with low odor, intended to simulate standing water in sceneries, dioramas, etc.The resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box. Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness up to 5cm. Content: 180ML (120 resin + 60 hardener). Contains 2 syringes. Instructions and guide are included in the box
€21,80
-
Aircraft engine oil
Enamel Product. The definitive mixture to make oil effects in any type of airplane parts. The oil in planes is different than in other vehicles as the color is lighter. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
€3,55
-
Streaking Grime for Red Hulls
Enamel Product. With this enamel product the modeler may easily represent streaking dirt effects on ship hulls painted in red primer. It can also be used on other issues such as the hull of a tank. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
€3,55
-
Dark Wash fo Wood Deck
Enamel Product. This enamel wash is specially designed to bring out the detail of the wooden covers typical of many warships. It can also be easily used for any other wooden subject.Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
€3,55
-
Black
Ultrafine high quality pigment for modelling. The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price. These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
€3,55
-
Neutral Grey For White/Black Wash
Enamel Product. A basic wash that is useful for many colors, ranging from metallic to reds, yellows, blues etc. A must have for vehicles, figures and sci-fi lovers. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
€3,55
-
Decay Deposit For Abandoned Vehicles
Enamel Product. This deposit type paint has been developed to give our models a worn and faded appearance on the surface of abandoned objects, vehicles or buildings.The finish is extremely authentic.
€3,55
-
Light Filter For Green Vehicles
Enamel Product. Filters are designed to achieve a subtle tonal variation for vehicles especially in monotone camouflage colours. Shake and apply directly from the bottle with a flat brush. This filter allows us to subtly change the base tone of our DAK vehicles, turning it into a more accurate and authentic colour. It is also suitable for modern vehicles in sand and light shades. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next painting steps.Use the filters by wetting a brush and applying it without flooding the surface, to enrich the tones on your models, unify the camouflage or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution or looking for the correct colours for our vehicle.These enamel-based filters can be cleaned or diluted with White Spirit.
€3,55
-
Neutral Grey Filter
Enamel Product. Filters are designed to achieve a subtle tonal variation for vehicles especially in monotone camouflage colours. Shake and apply directly from the bottle with a flat brush. This filter allows us to subtly change the base tone of our DAK vehicles, turning it into a more accurate and authentic colour. It is also suitable for modern vehicles in sand and light shades. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next painting steps.Use the filters by wetting a brush and applying it without flooding the surface, to enrich the tones on your models, unify the camouflage or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution or looking for the correct colours for our vehicle.These enamel-based filters can be cleaned or diluted with White Spirit.
€3,55
-
Dark Filter For Wood
Enamel Product. Filters are designed to achieve a subtle tonal variation for vehicles especially in monotone camouflage colours. Shake and apply directly from the bottle with a flat brush. This reddish brown filter allows us to subtly change the base tone of our vehicles in sand, brown or even green tones, and is also very useful for tools, boxes and other wooden parts. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next painting steps.Use the filters by wetting a brush and applying it without flooding the surface, to enrich the tones on your models, unify the camouflage or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution or looking for the correct colours for our vehicle.These enamel-based filters can be cleaned or diluted with White Spirit.
€3,55
-
Filter For Nato Vehicles
Enamel Product. Filters are designed to achieve a subtle tonal variation for vehicles especially in monotone camouflage colours. Shake and apply directly from the bottle with a flat brush. This filter allows us to subtly change the base tone of our DAK vehicles, turning it into a more accurate and authentic colour. It is also suitable for modern vehicles in sand and light shades. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next painting steps.Use the filters by wetting a brush and applying it without flooding the surface, to enrich the tones on your models, unify the camouflage or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution or looking for the correct colours for our vehicle.These enamel-based filters can be cleaned or diluted with White Spirit.
€3,55
-
Wash For Afrika Korps Vehicles
Enamel Product.D.A.K. wash for Africa Corps vehicles, also other light colored desert vehicles. Apply on details and remove excess with a clean brush moist with Enamel Thinner. A very appropriate color for desert vehicles painted with a light sand color, especially German tanks from DAK. The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
€3,55
-
Fuel Stains
Enamel Product. The definitive mixture to make fuel spilled effects in any type of modern or classic vehicle. This is not product to make oil and grease effects. This product is good mainly to make fuel spilled effects only with a great realism. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
€3,55
-
Africa Dust Effects
Enamel Product. Enamel type product for modelling. Realist color to make dust effects in vehicles of the Africa Korps, British or even modern. Light tan color is suited to creating dusty accumulations on surfaces. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner.
€3,55
-
Dry Mud - Liquid Pigment
The range of liquid pigments for modeling in 35ml format allows us to work wet to access all the recessed areas of our models and allows fixation without the need for extra products, glues or fixers.It also enables us to work or adjust the pigment during the drying process.The finish provided once dry is matte with the texture of the pigment.They have been specially designed to perform weathering effects such as rust, dust, dirt, etc..Its fast evaporating solvent allows an accelerated drying providing a different finish once completely dry.They can be used in combination with pigment coatings as they are not a substitute for these and are complementary to achieve different effects.
€3,55
-
Concrete - Liquid Pigment
The range of liquid pigments for modeling in 35ml format allows us to work wet to access all the recessed areas of our models and allows fixation without the need for extra products, glues or fixers.It also enables us to work or adjust the pigment during the drying process.The finish provided once dry is matte with the texture of the pigment.They have been specially designed to perform weathering effects such as rust, dust, dirt, etc..Its fast evaporating solvent allows an accelerated drying providing a different finish once completely dry.They can be used in combination with pigment coatings as they are not a substitute for these and are complementary to achieve different effects.
€3,55
-
Weathering Pencils Full Range Cloth Case with a Zipper
INCLUDES 37 PENCILS / CAPACITY FOR 80 PENCILS Elegant black fabric case with zipper, designed to comfortably store and transport the full range of pencils. Its interior includes the range of 37 effect pencils, keeping them organized and protected at all times. Made from durable, high-quality materials, it features a practical zipper closure and an embroidered logo that provides an exclusive, professional finish. Ideal for artists and modelers looking for functionality and style for their work tools. AK10001 Black AK10002 Rubber AK10003 Smoke AK10004 White AK10005 Dirty White AK10006 Olive Green AK10007 Light Green AK10008 Dark Green AK10009 Sand AK10010 Sepia AK10011 Light Rust AK10012 Medium Rust AK10013 Dark Rust AK10014 Strong Ocher AK10015 Vivid Orange AK10016 Light Chipping for Wood AK10017 Dark Chipping for Wood AK10018 Gun Metal (Graphite) AK10019 Chipping Color AK10020 Red Primer AK10021 Green Blue AK10022 Dark Blue AK10023 Light Blue AK10024 Dark Grey AK10025 Neutral Grey AK10026 Dust / Rainmarks AK10027 Concrete Marks AK10028 Earth Brown AK10029 Buff AK10030 Streaking Dirt AK10031 Red AK10032 Yellow AK10033 Aluminum AK10034 Gold AK10035 Dark Aluminum AK10036 Bronze AK10037 Copper *We recommend to apply them over a matte surface to obtain the best result.
€46,25
-
AK Basing Bits Nopal Cactus
Cacti with fleshy, flat stems shaped like paddles, covered with spines and small stiff hairs. They can be used on bases to decorate desert-themed armies, such as orcs, and are also perfect for setting the scene in any arid environment. It contains 20 pieces. AK BASING BITS are high-quality resin accessories designed to bring life to the bases of your miniatures and scenes. In a matter of seconds, they add story, depth, and richness to the miniature
€6,95
-
AK Basing Bits Barrel Cactus
Detailed 3D-printed miniatures of round cacti, ideal for adding a desert and authentic touch to the bases of your miniatures, dioramas, or gaming tables. A perfect complement for arid environments, western landscapes, or post-apocalyptic worlds. It contains 20 pieces. AK BASING BITS are high-quality resin accessories designed to bring life to the bases of your miniatures and scenes. In a matter of seconds, they add story, depth, and richness to the miniature.
€6,95
-
Texturizer Acrylic Resin 100ml
100ml bottle. High quality acrylic resin to mix with pigments to fix textures and with a matte finish. TEXTURIZER can be used to make terrains and lower parts of vehicles.
€6,20
-
AK Basing Bits Far West
This set contains a selection of 3D-printed resin Wild West accessories with a high level of detail, featuring a wide variety of iconic objects from the American West to bring authenticity, character, and visual richness to your scenes. It includes a range of elements designed to enhance dusty towns, campsites, ranches, stagecoach stations, saloons, forts, or any setting inspired by the Old West. Perfect for decorating bases, enriching visual storytelling, and adding realism and atmosphere to your miniatures, dioramas, or gaming terrain. It contains 24 pieces. AK BASING BITS are high-quality resin accessories designed to bring life to the bases of your miniatures and scenes. In a matter of seconds, they add story, depth, and richness to the miniature.
€6,95
-
Ak Diorama: Blooming Yellow Shrubberies
These medium-sized synthetic shrubs and bushes with a woody trunk can be used to provide variety and achieve density on any terrain.The packaging is designed to keep their shape completely random.The set includes a reproduction of a thin trunk used to facilitate its placement in any scene.Fix in place with a pair of tweezers.It can be cut to vary its height with small scissors .It can be glued with PVA glue.Different colors can be combined to achieve greater dynamism and color variety.Combining different heights and densities we will achieve really surprising results. Height between 30-40mm
€9,50
-
Ak Diorama: Blooming Pink Shrubberies
These medium-sized synthetic shrubs and bushes with a woody trunk can be used to provide variety and achieve density on any terrain.The packaging is designed to keep their shape completely random.The set includes a reproduction of a thin trunk used to facilitate its placement in any scene.Fix in place with a pair of tweezers.It can be cut to vary its height with small scissors .It can be glued with PVA glue.Different colors can be combined to achieve greater dynamism and color variety.Combining different heights and densities we will achieve really surprising results. Height between 30-40mm
€9,50
-
Ak Diorama: Blooming White Shrubberies
These medium-sized synthetic shrubs and bushes with a woody trunk can be used to provide variety and achieve density on any terrain.The packaging is designed to keep their shape completely random.The set includes a reproduction of a thin trunk used to facilitate its placement in any scene.Fix in place with a pair of tweezers.It can be cut to vary its height with small scissors .It can be glued with PVA glue.Different colors can be combined to achieve greater dynamism and color variety.Combining different heights and densities we will achieve really surprising results. Height between 30-40mm
€9,50
-
Ak Diorama: Leaves and Shrubbery Foliage (Elongated)
The new items in the tufts range include grass mats with fallen leaves and different types of foliage. These miniature vegetation products are perfect to complement your scenes, figure bases and any type of diorama in which you need an extra touch of realism. Choose the type of grass you need, and create your scene quickly and easily, using the AK-Interactive Diorama Series product range Their size makes them usable for 1:35, 1:32 (recommended) but you can use in other scales like 1:48 projects.
€9,50
-
AK Fan Shaped Synthetic Brush
The Effects & Details family is recognizable by the gray tip on the handle. It includes special brushes with different shapes. Thanks to the soft and flexible synthetic fibers, they are ideal for modeling work but are also perfect for Fine Arts.
€2,50
-
AK Basing Bits Dogs
This set contains a selection of 3D-printed resin dogs with a high level of detail, representing different breeds, poses, attitudes, and behaviors to bring variety, character, and dynamism to any scene. It includes different configurations designed to fit them into urban environments, farms, campsites, homes, or any location that needs an additional touch of realism and life. Perfect for decorating bases, enriching visual storytelling, and adding small details that make your miniatures, dioramas, or scenery more believable, whether historical, steampunk, fantasy, or any living world where these loyal companions are part of the environment and the story It contains 9 pieces. AK BASING BITS are high-quality resin accessories designed to bring life to the bases of your miniatures and scenes. In a matter of seconds, they add story, depth, and richness to the miniature.
€6,95
-
AK Basing Bits Weapons Shot FX
These masterfully detailed 3D-printed weapon blast effects capture the fleeting instant when the projectile leaves the barrel, unleashing a symphony of gunpowder and energy that surrounds your figures in a halo of intense action and overflowing heroism, while setting them apart from any others thanks to the dynamism they convey. Ideal for transforming your figures where violence and glory converge.
€6,95
-
AK Basing Bits Pipes
This kit contains a set of pipes and pipe fittings to decorate bases and complete industrial or urban scenery, including different types of joints, elbows, reducers, hydrants, and pipe ends, providing a varied range of shapes and uses. Perfect for setting the scene in factories, sewers, alleyways, mechanical complexes, or scenes packed with technical detail and realism. As an extra, this bit can be enlarged in size and is compatible with styrene sections. Set of 23 Pieces
€6,95
-
AK Basing Bits Fantasy Football Trophies
Set of 20 Trophies Highly detailed 3D-printed resin trophies, perfect for adding a distinctive and thematic element to the bases of your miniatures, dioramas, or gaming tables. Ideal for wargames and fantasy sports style games like Blood Bowl, they can help represent coveted prizes, legendary championships, or display cases full of glory, bringing personality, narrative, and a unique touch to your miniatures and scenes.
€6,95
-
AK Basing Bits Fantasy Football Balls
Set of 25 Balls Highly detailed 3D-printed resin footballs, perfect for adding a dynamic and thematic element to the bases of your miniatures, dioramas, or gaming tables. Ideal for wargames and fantasy sports-style games like Blood Bowl, they can help recreate epic matches, chaotic training sessions, or action-packed stadiums, bringing personality, realism, and a unique touch to your miniatures and scenery.
€6,95
-
AK Storm 400ml Permanent spray adhesive
Permanent spray adhesive This 400ml solvent-based spray adhesive provides strong, even adhesion without bubbles or lumps.Ideal for paper, cardboard, wood, fabric, photos, diorama scenery and creative projects.Suitable for both porous and non-porous surfaces.Slow drying time.
€12,95
-
AK Basing Bits Ice FX
Add a cold and radiant touch to your bases and scenes with crystals and ice effects.Ideal for representing frozen spells, glacial landscapes, crystalline caverns, or weapons imbued with the power of frost.Perfect for armies and settings where magic, winter, or the elemental energy of ice take center stage. It contains 13 pieces. AK BASING BITS are high-quality resin accessories designed to bring life to the bases of your miniatures and scenes. In a matter of seconds, they add story, depth, and richness to the miniature.
€10,75