GreenStuffWorld

Sculpting Tools Set x10These tools are made of stainless Steel and hand-crafted by master craftsmen. This hobby tool range of double-headed sculpting tools is to be used in conjunction with Green Stuff or any other modeling Putty or Clay and will give you all of the indispensable tools and supplies needed for every project.  Material: Stainless steelProduction: handcraftedPolishing system: by HandQuantity: 10 tools

Lees meer minder

Water-soluble patinas to make miniatures, scale models, terrain, and props look dirty and worn down. Water-Soluble Patina is a partially water-soluble decorative patina designed to create realistic effects of aging, grime, rust, moisture, soot, wear, and tonal variations on miniatures, models, scenery, props, and other non-porous surfaces. Its formula provides an ultra-matte, natural finish and is designed so that the pigments settle organically into crevices, textures, and reliefs, achieving more believable results than those of conventional paint. Additionally, it is a non-toxic acrylic product with no harsh fumes. It is important to shake the product well before each use, as some components may separate and settle at the bottom of the container during storage. If it has been left to stand for a long time, you can use metal balls to mix it thoroughly. Using a wet palette is not recommended. It can be applied directly or diluted slightly with water if necessary. Clean brushes and tools with water or alcohol immediately after use and prevent the product from drying on them. It can also be used with an airbrush to achieve smoother transitions, weathering effects, and large-scale aging effects. Depending on the pressure used in the compressor, it may be necessary to slightly dilute the product for use in the airbrush. In that case, add a few drops of water and stir until well diluted. Clean the airbrush as usual after use. Apply to clean, dry, grease-free surfaces such as plastic, resin, or metal. Not recommended for porous or absorbent surfaces such as untreated wood or paper. The intensity of the effect will depend on the amount applied, the number of coats, and the technique used. To remove and activate the product, use cotton swabs, a brush, or a sponge dampened with water to remove excess and activate the product, thereby achieving finishes ranging from soft and subtle to more intense, irregular, and personalized effects. Since it is partially water-soluble, the finish may be altered if it gets wet or is handled with wet hands; therefore, it is recommended to seal the final result with a matte varnish (or mod podge) to preserve it and maintain its natural appearance. Contents: 1x 60ml

Lees meer minder

Airbrush spray booth filter set Airbrush spray booth filters are an essential accessory for keeping your workspace cleaner while maintaining strong extraction performance during every painting session. This filter set includes 2 polyester filters (5 µm) designed to capture overspray, paint particles, and airborne residue generated when using an airbrush. With a basis weight of 180 g/m², they provide an effective balance between filtration and airflow, helping your spray booth deliver reliable performance for miniature painting, scale modeling, crafts, and other hobby projects. Made from polyester and sized at 385 x 180 mm with a thickness of 20 mm, these replacement filters offer excellent coverage and a practical fit for regular hobby use. Their structure helps maintain proper airflow while trapping fine airborne particles, which is essential for consistent extraction and day-to-day efficiency. Replacing them regularly helps protect the internal components of your spray booth, reduces paint residue buildup, and keeps your setup working more effectively over time. These replacement filters are a direct fit for GSW Airbrush Spray Booths and are also compatible with many other spray booth models, making them a versatile option for hobbyists looking for dependable spare parts. Whether you paint miniatures, scenery, scale models, or custom projects, fresh filters help your spray booth perform at its best and keep your painting area cleaner, safer, and more comfortable. Content: 2x polyester filters (5 µm)

Lees meer minder

Portable airbrush spray booth for painting miniatures, crafts, and scale models by Green Stuff World  Portable airbrush spray booth An Airbrush Spray Booth for airbrushing and modeling is an essential tool for hobbyists when using an airbrush who want a cleaner, more comfortable, and more controlled painting environment. Designed for miniatures, scale models, scenery, crafts, and other creative projects, this portable spray booth helps capture overspray and airborne paint particles while keeping your workspace more organized. Its compact structure makes it a practical solution for both home hobby rooms and temporary painting setups. This model features a foldable and extendable design with a rear pipe that can be connected to a window outside your hobby room to keep the air clean, making it easy to store when not in use and quick to set up whenever you need it. With a folded size of 40.5 x 22 x 27 cm and an unfolded size of 40.5 x 43.3 x 33 cm, it offers a smart balance between working area and portability. Weighing just 4.75 kg, it is lightweight enough to move around easily, while the integrated top handle adds extra convenience for transport and storage. It includes built-in interior LED lighting, providing clear and consistent illumination while you work so you can see colours, details, and paint coverage more easily during every session. This integrated light source helps improve visibility inside the working area, making it easier to spot fine details, control shading and highlights, and paint with greater comfort and precision, even in rooms with limited ambient light. The booth is equipped with high-density polyester filters 5 µm designed to capture most paint particles and moisture generated during airbrushing. This helps reduce overspray in the surrounding area and contributes to a cleaner painting station. The fully translucent booth design also improves visibility while you work, and for users painting larger models or projects, two units can be combined to create a wider working area with greater flexibility. Do I need a spray booth for airbrushing? If you paint regularly indoors, the answer is, yes, you do need a spray booth for airbrushing. A spray booth helps contain overspray, reduces the amount of paint residue floating around your hobby room, and makes airbrushing more comfortable over long sessions. It is especially useful for miniature painters, model makers, and crafters who want to protect their work area, improve cleanliness, and maintain better working conditions while painting. This spray booth is also designed with ease of use in mind. It includes an on/off switch with an indicator light that shows when the unit is powered on, making operation simple and intuitive. A turntable is included as well, allowing you to rotate models smoothly while painting and reach different angles more easily without constantly handling the piece. With a low operating noise of around 45 dB, it provides efficient extraction while remaining pleasantly quiet for regular hobby use. In terms of performance, the unit delivers an air flow of 5.2 m³/min and uses a DC 12V 1.6A motor, with an input of AC 100–240V / 50–60Hz and voltage, frequency, and plug adapted according to the destination country. This makes it a versatile and reliable choice for hobbyists looking for an effective, portable, and user-friendly airbrush spray booth. Whether you are painting miniatures, scale models, terrain, or custom projects, it offers a practical way to improve your airbrushing setup. It also includes a turntable, filters, and flexible exhaust hoses.  Content: 1x Instructions Technical specifications Feature Value Type Portable foldable airbrush spray booth Application Airbrushing, miniature painting, scale modeling, crafts, and hobby projects Air Flow 5.2 m³/min Motor DC 12V / 1.6A Plug type European Input AC 100–240V / 50–60Hz Noise Level Approx. 45 dB Folded Dimensions 40.5 x 22 x 27 cm Unfolded Dimensions 40.5 x 43.3 x 33 cm Net Weight 4.75 kg Filter Type High-density filter for paint particles and moisture Extra Features Foldable design, translucent booth, illuminated on/off switch, turntable, and top handle Compatibility Voltage, frequency, and EU plug Brand Green Stuff World   ✅ This is for you if... You paint miniatures, scale models, terrain, or crafts with an airbrush and want a cleaner, more controlled workspace. You need a compact and lightweight spray booth that can be folded away easily when not in use. You want to reduce overspray and airborne paint particles while working indoors. You value a quieter setup, with noise levels around 45 dB, for more comfortable hobby sessions. You want a practical booth with helpful accessories such as a turntable, carry handle, and illuminated power switch. You occasionally work on larger projects and like the option of combining two translucent booths for more space. ❌ This is NOT for you if... You only paint with traditional miniature paint brushes and do not use an airbrush at all. You need an industrial-grade extraction system for heavy commercial or professional workshop use. You regularly work with very large pieces and need a permanently oversized spray booth. You are looking for a spray booth designed for solvent-heavy industrial painting rather than hobby and modeling applications. You do not have enough workspace to unfold the booth to its full operating size. Frequently Asked Questions Do I really need a spray station for miniature painting?If you paint indoors on a regular basis, it is highly recommended. A good extraction unit helps capture overspray, reduces floating paint particles, and keeps your workspace cleaner and more comfortable during long sessions. What does a paint extraction cabinet actually do?Its main job is to pull in overspray, paint mist, and airborne residue through a filter system. This helps prevent color particles from spreading around your hobby area and improves working conditions while spraying. Can I use it for miniatures, scale models, and scenery?Yes. These units are suitable for miniatures, scale models, terrain pieces, dioramas, cosplay parts, crafts, and many other hobby projects that involve spray painting. Does it remove fumes completely?No. It helps capture paint particles and reduce airborne residue, but it does not make harmful vapors disappear completely. Good room ventilation is still important, especially when using solvent-based products. Is it only useful for advanced hobbyists?Not at all. It is just as useful for beginners as it is for experienced painters. In fact, new users often benefit the most because it helps keep the painting area tidy and easier to manage from the start. How often should I replace the filter?That depends on how often you paint and how much material you spray. If the filter looks saturated, airflow drops, or paint residue starts building up faster than usual, it is time to clean or replace it. Can I use acrylics, primers, and varnishes in it?Yes, it is commonly used with acrylic paints, primers, varnishes, inks, and similar hobby products. You should still check the product you are spraying and make sure your setup is appropriate for that type of material. Is a foldable model strong enough for regular use?Yes, provided it is well-made and used correctly. GSW's compact foldable design is very practical for hobbyists who need to save space without giving up a dedicated spraying area. Does a quieter unit still work well?Yes. A lower noise level does not automatically mean weak performance. Many modern hobby spray stations are designed to offer a good balance between airflow, comfort, and everyday usability. Will it keep my room perfectly clean?It helps a lot, but no extraction system keeps a room perfectly spotless. It reduces mess and overspray significantly, especially compared to spraying without any protection at all. What should I look for before buying one?The most important things are airflow, filter quality, working area size, noise level, portability, ease of storage, and whether it suits the kinds of models and projects you normally paint.

Lees meer minder

Kill Team Objective Markers compatible Green Stuff World's Basic Mission Objective Markers are transparent discs just 1 mm thick with precision laser engraving. They clearly show both the outer boundary and the inner zone, marking exact mission locations on boards compatible with Warhammer® Kill Team. Each pack includes six markers: a 40 mm inner circle (base size) surrounded by a 1″ + 1″ scoring ring, all made from flexible, shatterproof glasspack plastic. Being fully transparent, they don’t disrupt your killzone’s look or create steps where operatives might slip. The engraved line marks the exact 2″ Control Zone, speeding up APL checks and avoiding arguments about who controls the point. These markers are ideal for dark or grey game mats, though they’re less suited to very light backgrounds like snow-themed environments. Lightweight and stackable, they fit easily into any tournament case or Operatives box. At setup, place the six discs where the mission map indicates. The moment an operative’s base tags the 40 mm hub, it can act, and the outer ring tells you at a glance who’s inside the 2″ bubble. Competitive packs insist the marker stays put even if terrain shifts, so the 1 mm profile is perfect for tight corridors, hatchways, or Into the Dark boards while your kill teams scrap for glory. Content: x6 Warhammer®, Warhammer 40k®, and 40k® are registered trademarks of Games Workshop Limited. The products offered are not affiliated with, authorized by, or endorsed by any of these companies. Green Stuff World only manufactures and markets compatible products designed for use with these and other miniature lines.

Lees meer minder

Pre-painted ruined Sci-Fi walls compatible with Warhammer 40,000, Kill Team, Necromunda, Infinity, Star Wars Legion, Marvel Crisis Protocol, and Fallout Wasteland Warfare  Pre-painted Sci-Fi walls This set of corners and pre-painted Sci-Fi walls is designed to create urban, industrial, or post-apocalyptic scenarios on your gaming tables, providing solid cover, blocking lines of sight, and defining corridors, courtyards, and combat zones with a realistic aged concrete look. Due to their scale and use, they are ideal for miniature tabletop games or wargames where the terrain defines the tactics. Specifically, they are compatible with Warhammer 40,000, Kill Team, Necromunda, Infinity, Star Wars Legion, Marvel Crisis Protocol, Fallout Wasteland Warfare, or modern role-playing games and skirmishes. Use them as perimeter walls, barricades, modular ruins, or zone dividers to add three-dimensionality and a more cinematic feel to your games. The widths of the walls are based on the inch system and the typical grid size of many boards: the shortest section measures 2.5 cm (1 inch) and the longest 7.5 cm (3 inches), allowing corners to be joined together and pieces to be easily combined to build clean and stable corners, turns, and enclosures. This set of pre-painted terrain is quick and easy to assemble, thanks to its interlocking system, with no glue required to play. However, if you prefer to fix them permanently, we recommend PVA glue; avoid cyanoacrylate if you don't want to risk damaging or whitening painted surfaces. Material: MDF woodContents: 12 fully pre-painted Sci-Fi wallsHeight: 5 cmWidths: from 2.5 cm to 7.5 cm (inch system)

Lees meer minder

Pre-painted fantasy dungeon walls compatible with the Hero Quest board game, Descent, Dungeon and Dragons, Dungeon Saga, Warhammer Quest, Sword and Sorcery, and Zombicide Black Plague. Pre-painted ruined dungeon wall corners This set of pre-painted ruined dungeon walls and corners is designed to be fully compatible with the original Hero Quest, recreating corridors and rooms with an aged stone aesthetic and underground fantasy atmosphere. In addition to being compatible with HeroQuest, they can be used in other dungeon exploration and medieval fantasy games with miniatures and interior maps, such as Descent Journeys in the Dark, Dungeon and Dragons, Dungeon Saga, Warhammer Quest, Sword and Sorcery, or Zombicide Black Plague, as long as the game system uses walls and rooms, or simply because you want to add three-dimensionality and a cinematic touch to your game. The walls include typical dungeon details to enhance the atmosphere, such as torches, creatures from the depths, skeletons, blood, and bones, adding visual variety and a narrative touch to each room. The widths of the walls are based on the inch system and the typical grid size of board games: the shortest section measures 2.5 cm (1 inch) and the longest 7.5 cm (3 inches), allowing corners to be joined together and pieces to be easily combined to create rooms, corridors, and turns in a clean and stable way. This set of pre-painted terrain is quick and easy to assemble, thanks to its interlocking system, with no glue required to play. However, if you prefer to fix them permanently, we recommend PVA glue; avoid cyanoacrylate if you don't want to risk damaging or whitening painted surfaces. Material: MDF woodContents: 16 fully pre-painted fantasy dungeon wallsHeight: 5 cmWidths: from 2.5 cm to 7.5 cm (inch system)

Lees meer minder

Pre-painted Foldable Matched Play Terrain for Competitive Warhammer 40,000 This foldable pre-painted Matched Play Terrain is designed for competitive Warhammer 40,000 games, offering dependable line-of-sight blocking, high shooting positions, and clean, consistent footprints for modern competitive tables. They’re a great choice for demanding players, tournament organizers, associations, and wargaming clubs looking for terrain that is quick to set up, easy to transport, and visually professional from the first game. They also work perfectly with other 28–32mm sci-fi skirmish and wargames such as Kill Team, Necromunda, Infinity, Deadzone, Core Space, Stargrave, and Zombicide: Invader. This set includes all the terrain pieces required to build the full range of standard Tournament Terrain Layouts: all the necessary U-shaped buildings, the 8 low walls, and 4 small L-shaped ruins—assemble two as left-facing Ls and two as right-facing Ls (once glued, their orientation is fixed). Large L ruins, on the other hand, are typically glued in a single orientation and can be used as either a left or right L simply by rotating the entire piece 180° when placing it on the table. For maximum flexibility and to always have every possible layout combination available, we recommend purchasing 6 additional Large L ruins and assembling them in the opposite orientation to your first 6. Each ruin is fully pre-painted by elves with a high level of detail, featuring neutral sci-fi tones and weathering effects that fit any Warhammer 40k army and battlefield theme—after assembly, they’re ready to play straight out of the box. These matched play ruins require a simple initial assembly, for which we recommend PVA glue. This adhesive works especially well with MDF wood and ensures strong but flexible joints, ideal for repeated folding. We do not recommend cyanoacrylate, as it may damage painted surfaces and can become brittle with long-term use. The design is reversible, allowing you to assemble the L-shape facing left or right depending on your layout and tactical needs. This extra flexibility makes it easy to mirror terrain setups, adjust firing lanes, and keep placements consistent across games. Please note that once permanently glued, the ruin will remain in the chosen left- or right-facing configuration. To keep boards from looking identical, the kit includes optional breakaway wall sections with pre-cut break zones. Leave them intact for a clean, competitive look, or open the break points to add battle damage and variation—customization is quick and completely optional. This pre-painted terrain is made from durable MDF wood, and it helps you upgrade your table immediately: competitive function, great visuals, and effortless transport. Contents:  2x Pre-painted Foldable U-Shaped ruins6x Pre-painted Foldable Large L-Shape terrain ruins4x Pre-painted Foldable Small L-Shape terrain ruins8x Pre-painted low walls

Lees meer minder

Pre-painted Foldable Matched Play Terrain for Competitive Warhammer 40,000 This foldable pre-painted Matched Play Terrain is designed for competitive Warhammer 40,000 games, offering dependable line-of-sight blocking, high shooting positions, and clean, consistent footprints for modern competitive tables. They’re a great choice for demanding players, tournament organizers, associations, and wargaming clubs looking for terrain that is quick to set up, easy to transport, and visually professional from the first game. They also work perfectly with other 28–32mm sci-fi skirmish and wargames such as Kill Team, Necromunda, Infinity, Deadzone, Core Space, Stargrave, and Zombicide: Invader. This set includes all the terrain pieces required to build the full range of standard Tournament Terrain Layouts: all the necessary U-shaped buildings, the 8 low walls, and 4 small L-shaped ruins—assemble two as left-facing Ls and two as right-facing Ls (once glued, their orientation is fixed). Large L ruins, on the other hand, are typically glued in a single orientation and can be used as either a left or right L simply by rotating the entire piece 180° when placing it on the table. For maximum flexibility and to always have every possible layout combination available, we recommend purchasing 6 additional Large L ruins and assembling them in the opposite orientation to your first 6. Each ruin is fully pre-painted by elves with a high level of detail, featuring neutral sci-fi tones and weathering effects that fit any Warhammer 40k army and battlefield theme—after assembly, they’re ready to play straight out of the box. These matched play ruins require a simple initial assembly, for which we recommend PVA glue. This adhesive works especially well with MDF wood and ensures strong but flexible joints, ideal for repeated folding. We do not recommend cyanoacrylate, as it may damage painted surfaces and can become brittle with long-term use. The design is reversible, allowing you to assemble the L-shape facing left or right depending on your layout and tactical needs. This extra flexibility makes it easy to mirror terrain setups, adjust firing lanes, and keep placements consistent across games. Please note that once permanently glued, the ruin will remain in the chosen left- or right-facing configuration. To keep boards from looking identical, the kit includes optional breakaway wall sections with pre-cut break zones. Leave them intact for a clean, competitive look, or open the break points to add battle damage and variation—customization is quick and completely optional. This pre-painted terrain is made from durable MDF wood, and it helps you upgrade your table immediately: competitive function, great visuals, and effortless transport. Contents:  2x Pre-painted Foldable U-Shaped ruins6x Pre-painted Foldable Large L-Shape terrain ruins4x Pre-painted Foldable Small L-Shape terrain ruins8x Pre-painted low walls

Lees meer minder

Toxic Diorama Set With this selection of materials, model paints, and epoxy resin, you will be able to recreate the characteristic effects of toxic, polluted, and devastated environments, filled with waste, industrial debris, fluorescent liquids, chemical puddles, and withered vegetation. The various decorative elements included in this basing set, such as vegetation and other resin bits like debris, contaminated waste, dead plants, and other themed accessories, will allow you to customize your model, diorama, or miniature bases with a striking, dark, and realistic finish. Perfect for both beginners and advanced hobbyists, this set of model-making and wargame materials will help you bring post-apocalyptic scenarios, devastated industrial zones, or polluted landscapes to life. Contains: Clear Epoxy Resin 300 ml Basing Bark ChipsSplash Gel - Flaming Yellow3D-Resin objects from contaminated environments (mutant fish, dead animals, warning signs, various types of debris, etc.)Dye for Resins YELLOW-GREEN FLUORGrass TUFTS XXL - 22mm self-adhesive - BURNTThorny Scrubs - BURNT YELLOWEarth Textures - DARK EARTH 30mlPigment LIGHT ORANGE OXIDETextured Paint - Martian - Fluor Green 30mlSilicone Mixing Cups 100mlMixing Sticks

Lees meer minder

The stackable tournament tray for miniatures from Green Stuff World is a transport and storage system designed to move miniatures neatly from game to game within a tournament, as well as between the storage area and the gaming table at home or at your club. Its design is optimized for use with magnetized miniatures, making it easy to position and move them during games, events, or tournaments. The base of this stackable tray is metalized, ensuring the figures remain secure on the surface during transport. This feature helps prevent unwanted movement when moving the Warhammer tray from one place to another and keeps the miniatures in their original arrangement without having to handle them individually each time their position is changed. This stackable tournament tray requires assembly and features thick side handles integrated into the structure itself, designed to facilitate a secure grip during manual transport and provide a more stable hold when lifting or moving the tray. We recommend using PVA glue for assembly; once assembled, the tray cannot be disassembled, enhancing its structural integrity and durability while preventing the loss of set components. Multiple transport trays can be stacked on top of one another, allowing you to organize miniatures by faction, army, project, or game system within a shelf, cabinet, or workspace. This feature also makes it easier to move several trays at once from storage to the gaming table, especially when working with multiple groups of miniatures or entire armies. The structure is made of black MDF, a material commonly used in organization and modeling accessories due to its balance between rigidity and weight. The black finish provides a uniform and discreet appearance, allowing it to blend visually with other storage elements, painting stations, or hobby furniture. The choice of this material also helps maintain a stable construction without resorting to complex components. The product is designed for easy assembly. The parts snap together quickly, allowing the transport tray to be ready for use in no time. Once assembled, the tray can be used both as a temporary stand during games and as a more permanent storage solution at home. Its design allows miniatures to remain in place and ready to be moved when necessary. These stackable Warhammer trays are used to transport miniatures between different tables during tournaments or gaming sessions, particularly Warhammer 40k tournaments, though they are especially useful in home settings, allowing entire units to be kept together on a single tray. This helps prevent individual transfers and accidents, simplifies pre-game organization, and reduces direct handling of painted miniatures. Contents: 1 tournament tray + 3 adhesive metalized rubber sheets for magnetized miniaturesUsable area: 300x630 mm (11.81 x 24.80 inches)

Lees meer minder

Wargame trophies are awards designed to add value to any miniature or strategy game tournament. Each one consists of a high-quality ABS-like resin figure left unpainted, allowing full customization depending on the type of tournament and the theme of the event. In addition, each figure includes a square MDF base lacquered in black, with a smooth surface ideal for applying vinyls, engraved plates, or other commemorative texts. This makes every trophy a unique piece that not only recognizes the players’ efforts but also reinforces the identity and prestige of the championship. The Wooden Spoon Award, in particular, is a special prize intended as a consolation trophy for the worst-performing participant in the event. An exclusive award that very few people can boast of having earned. Unlike other generic prizes, these trophies are designed with the creative spirit of the hobby in mind. The possibility of painting them with metallic finishes, chrome effects, or even with a scheme tied to the event itself turns them into true collector’s pieces. Whether in local leagues or major international tournaments, these trophies bring a special touch to the event, leaving players with a tangible reminder of their participation and of the competitive atmosphere that defines the world of wargames. Contents: 1x resin trophy figure + Display plinth

Lees meer minder

Add a wintery touch full of character to your bases, dioramas, scenery projects, and miniatures with this adorable collection of miniature penguins, printed in high-quality ABS-like resin. Each figure has been meticulously designed to recreate the distinctive look and personality of these polar creatures, making them a perfect addition to scenes set in cold climates or fantasy environments. Their variety of poses and sizes allows them to be easily integrated into multiple scales and modeling styles, especially in themed projects such as snowy landscapes, frozen bases, Christmas settings, or arctic scenes. The penguins are delivered unpainted, ready to be customized with your favorite painting techniques. They are ideal for miniatures in 1:48–1:35 scales, providing an optimal level of detail in wargames, dioramas, and hobby projects. Each set contains 25 resin penguins.

Lees meer minder

Magic Effects – Toxic spraysDiscover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects. Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects. Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity. Compatible with Warhammer 40k miniatures, specifically Nurgle, Tyranids, as well as other types of heroes, monsters, or scenarios from many other games, these effects are perfect for both modeling and wargame players looking to add drama, narrative, and visual dynamism to their armies. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints. Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale). Contents: x24

Lees meer minder

Magic Effects – Putrid Bile StreamsDiscover our new collection of magic effects printed in 3D resin, specially designed to bring your miniatures, dioramas, and fantasy or science fiction scenes to life. These 3D resin bits represent a wide variety of spells and elemental powers, from bursts of fire, ice, and electricity to toxic, arcane, or supernatural effects. Each piece has been meticulously modeled to capture the dynamism of movement and the intensity of magic in full action. Their transparent design allows you to play with lighting, color, and shadows, achieving spectacular results with simple touches of paint, inks, or LED lighting effects. Take advantage of their transparency and paint these special effects with intense inks, dipping inks, or fluorescent colors. These products enhance the internal brightness of the material and allow you to achieve truly spectacular luminous transitions and energy effects. By applying thin layers of color or combining different shades, you can simulate burning fire, sparkling ice, electric shocks, or toxic fumes with unique depth and luminosity. Compatible with Warhammer 40k miniatures, specifically Nurgle, Tyranids, as well as other types of heroes, monsters, or scenarios from many other games, these effects are perfect for both modeling and wargame players looking to add drama, narrative, and visual dynamism to their armies. These resin bits are made of high-quality ABS-like resin, offering strength, definition, and excellent compatibility with modeling glues and paints. Supplied unpainted, still attached to their printing sprue, and should be carefully removed before use. Perfect for wargaming miniatures from 28 to 54 mm (1:48–1:35 scale). Contents: x22

Lees meer minder

Water Effects – Jets and SplashesImmerse yourself in our new collection of water effects printed in transparent ABS-like resin, created to bring life, dynamism, and realism to your miniatures, dioramas, and scale scenes. These compatible Warhammer bits reproduce jets, splashes, waves, and water spills in different shapes in great detail, including splashes coming out of taps, pipes, or moving surfaces, perfect for setting urban, industrial, or natural scenes. Each piece has been digitally modeled with precision, capturing the fluidity and movement of water in full action. Thanks to its transparent material, you can take advantage of light, reflections, and color to achieve realistic special effects of clean, dirty, stagnant, or even magical water, depending on the finish you want to apply. For spectacular results, apply intense inks or Dipping Ink paints or fluorescent colors, depending on the desired effect, which enhance the internal brightness of the material and allow you to create unique color transitions, reflections, and aquatic depths. With thin layers of paint, you can simulate anything from a crystal-clear stream or a luminous fountain to a contaminated or supernatural liquid, depending on your project. For even more realistic results, we recommend combining these water effects with other aquatic-themed products from Green Stuff World, such as our transparent acrylic gels, ideal for creating waves, foam, or moving surfaces, or our ultraviolet resins, perfect for sealing, encapsulating, or adding volume to your scenes. The combination of these materials allows you to recreate everything from flowing rivers and crystal-clear puddles to broken pipes, fountains, or contaminated liquids, adding depth, texture, and natural shine to any modeling or wargaming project. Ideal for wargame miniatures, scenery, or dioramas, these effects are perfect for those looking to add movement, narrative, and visual detail to their creations. These resin items are made from high-quality transparent ABS-like resin, offering great strength, definition, and compatibility with leading modeling glues and paints, ensuring easy assembly and professional results. They are delivered unpainted, in their 3D printing matrix, and must be carefully removed before use. Compatible with 28–54 mm miniature (1:48–1:35 scale). Contents: x32

Lees meer minder

Pre-Painted Foldable WTC terrain | Official WTC scenery compatible with competitive Warhammer 40k tournaments WTC foldable and pre-painted WTC terrain ruins are specially designed for competitive Warhammer 40,000 games under the WTC (World Team Championship) format. This is the official scenery of the WTC circuit, developed to offer maximum functionality and a professional visual finish from the first use. These structures are the ideal choice for demanding players, tournament organizers, associations, and wargaming clubs looking for quality terrain that is quick to assemble and easy to transport. Its smart folding system allows each piece to be stored and moved comfortably, without sacrificing stability or detail. Each piece of WTC terrain or ruin has been pre-painted with professional quality and a wealth of detail, ready to use right out of the box. Or as we like to say at Green Stuff World: pre-painted by elves, with neutral tones and weathering effects that match any style of Warhammer 40k army or gaming table. These WTC format Warhammer 40k compatible folding buildings require simple initial assembly, for which we recommend the use of PVA glue. This adhesive ensures strong but flexible joints, ideal for repeated folding. We do not recommend using cyanoacrylate, as it could cause the pieces to come apart or become damaged with prolonged use. The design of each building allows for reversible assembly, so you can configure the structure in an L-shape on either the left or right, depending on your tactical needs. This offers extra versatility to customize the deployment of your scenery without the need for additional elements. In addition, the windows can be assembled open or closed, adding a tactical component to each ruin. Decide how you want to block lines of sight or control access depending on your faction's play style or the current scenario. These ruins are 100% compatible with the official WTC rules and are ideal for international events, home games, team training, or demonstrations in wargaming stores. Each WTC ruin set has been designed with durability and modularity in mind. The materials used are resistant to heavy use, and their folding system allows for easy transport without damaging the paint or compromising the structure. With this pre-painted terrain, made of MDF wood, you can raise the level of your games from the very first minute. Save assembly time, gain in aesthetics, and get ready to compete with a professional, functional, and spectacular gaming environment. Contents: 1x Pre-Painted Foldable Three-Story WTC Terrain Ruin with instructions

Lees meer minder

Flexible sanding blocks are versatile tools, ideal for modelling, crafts, and cosplay. Made from 5 mm EVA foam, they provide a comfortable surface that easily conforms to hand curves and irregular areas. Their 100x80 mm size makes them easy to handle and suitable for both fine detail work and larger surfaces. Each Flexible Sanding Pad is coated with abrasive on one side only, allowing for more precise control without damaging the back. They come in various colours that indicate the grit level, making them easy to identify while working. They can be cut with scissors to adapt to specific shapes or angles. These blocks combine comfort, precision, and flexibility, making them essential for surface preparation and finishing work. Size: 100x80 mmGrit: #2500Contents: 5x

Lees meer minder

Flexible sanding blocks are versatile tools, ideal for modelling, crafts, and cosplay. Made from 5 mm EVA foam, they provide a comfortable surface that easily conforms to hand curves and irregular areas. Their 100x80 mm size makes them easy to handle and suitable for both fine detail work and larger surfaces. Each Flexible Sanding Pad is coated with abrasive on one side only, allowing for more precise control without damaging the back. They come in various colours that indicate the grit level, making them easy to identify while working. They can be cut with scissors to adapt to specific shapes or angles. These blocks combine comfort, precision, and flexibility, making them essential for surface preparation and finishing work. Size: 100x80 mmGrit: #600Contents: 5x

Lees meer minder

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #2000Contents: 5x

Lees meer minder

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #800Contents: 5x

Lees meer minder

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #600Contents: 5x

Lees meer minder

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #400Contents: 5x

Lees meer minder

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #280Contents: 5x

Lees meer minder

Rigid sanding pads are strong and precise tools, ideal for modelling, crafts, and cosplay. They are made of 5 mm thick rigid PVC foam, which provides a firm and durable base. They retain the same practical 100x80 mm dimensions as the flexible models but offer a more stable structure. Unlike flexible sanding blocks, these blocks feature wet sandpaper on both sides, enabling dual-sided use and extended durability. Their rigid construction allows them to lie completely flat on the work surface, making it easier to sand large parts directly on the table. They cannot be cut with scissors, but they offer greater control on flat surfaces or when even pressure is needed. They are the perfect choice for those seeking precision and stability in finishing work. Size: 100x80 mmGrit: #180Contents: 5x

Lees meer minder

The Green Stuff World hand sandpaper holder or hand sanding block is a sturdy yet lightweight tool, 3D printed in high-strength PLA, and offers the ultimate solution for achieving flawless surfaces in scale modeling, wargaming, dioramas, and cosplay. Its ergonomic design provides a comfortable and precise grip, allowing for both rough sanding and fine polishing on miniatures, 3D-printed parts, or EVA foam armor. Available in two versions — flat and curved — the holder adapts to any geometry: straight vehicle edges, organic scenic-base contours, or pronounced curves on helmets and pauldrons. The internal clamp keeps wet- or dry-sandpaper sheets perfectly taut and wrinkle-free, whatever the grit thickness. Its width matches exactly half a sheet of Green Stuff World’s standard sandpaper, maximising the use of every sheet; nevertheless, it can be used with paper from any other brand, making it a versatile, indispensable addition to your workbench. Dimensions: 45 mm wideSurface: FlatContents: 1 ×

Lees meer minder

Resin street signs 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. This item includes 20x plasticard profiles, 2.5 mm wide and 75 mm long, for holding road signs. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 1:35 miniatures. Scale: 1:35Content: 18x 

Lees meer minder

Printed Park Trash Cans - Round (pack x 4) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 16x20x16mm - 16x30x18mmScale: 1:58 - 1:48Content: 4x Park Trash Cans - Round

Lees meer minder

Printed Park Trash Cans - Square (pack x 4) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 17x25x17mm - 17x30x14mmScale: 1:58 - 1:48Content: 4x Park Trash Cans - Square

Lees meer minder

Waiting City Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 47x26x21mmScale: 1:58 - 1:48Content: 2x

Lees meer minder

Waiting Room Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 49 x 28 x 21mmScale: 1:58 - 1:48Content: 2x

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

2D Terrain set Highest quality 2D terrain on the market. Constructed from neoprene exactly to the specifications to be compatible with The 9th Age. This durable piece of terrain will take your epic battles to a whole new level. Light and easy to store and transport, you will always have a great battlefield ready to use. These terrain pieces are anti-slip, and resistant to wrinks and creases. This 2D Terrain Set comes with 1pcs Forest with 6 trees - size: 6x10”

Lees meer minder

Lava River - Neoprene Terrain Set High quality 2D neoprene terrain tiles compatible with any roleplaying game. Wage your battles on an epic battlefield overrun by a scorching 10 cm (4 inch) wide river of lava, complete with smoke and burning rock. Stone bridges and loose boulders allow for different gameplay mechanics, it all depends on your imagination! Create different river streams in each game by changing round the tiles. They can be combined with each other creating a lava river of up to 4.5 metres (180 inches), and once victory has been declared it can be packed away easily tile by tile, allowing for easy storage thanks to their small size. Neoprene Modular Tiles Printed using heavy-duty materials, the Neoprene Terrain Sets are fade and scratch resistant. The tiles have a completely seamless matt finish on the printed image, which allows photographs to be taken of miniatures with virtually no fabric grain showing up in extreme close-up photographs, particularly useful for small-scale sizes. The antislip rubber backing provides a firm grip on the table and creates a high level of friction, preventing miniatures from sliding when on an even surface and assuring their position on the battlefield. The nature of neoprene means these tiles are very resilient yet flexible, completely resistant to wrinkles and creases. This Terrain Set includes: 2x Lava stone crossings - 8x12" (20x30cm)2x Lava bridges - 8x12" (20x30cm)4x Lava diagonal tiles - 8x8" (20x20cm)6x Lava short curves - 8x8" (20x20cm)3x Lava long curves - 8x12" (20x30cm)2x Lava intersections - 8x8" (20x20cm)4x Lava dead-end - 8x8" (20x20cm) Total x23

Lees meer minder

Resin Cast Frames Large with spring clips Resin Cast Frames are designed to facilitate the creation of multiple mold boxes for resins and silicones. Manufactured in a 5mm solid transparent methacrylate material, and features L-shaped sides for added structural integrity. Includes four spring clips, which play a crucial role in securely holding each frame in position. It can be utilized repeatedly, making it an economical alternative to continually buying or constructing separate mold boxes. They can be configured in various ways to create molds with diverse dimensions and shapes without the need for investing in an array of mold boxes. These molds greatly facilitate the mold box assembly process but do not completely seal the joints, so to prevent any resin from leaking out during the molding process, the usual joint sealing process should be carried out. Instructions for use Make sure the area is completely free of imperfections and dirt before starting. Position the frames so that the L-shaped matches the overlap of the next frame. If using a release agent, note that the resin walls may not be completely smooth. Place the spring clips on the L-shaped joints to secure the position. To ensure a tight seal both between the frames and with the base, any remaining gaps should be filled with modeling clay to prevent resins, silicone, or casting compound from running out. Any gaps may cause leaks. Pour resin evenly over the surface. After the recommended curing time, first remove the spring clips carefully and then the frames firmly. Contains: 4x Methacrylate L-pieces, size 100mm high x 200mm long. 4x Fastening clips

Lees meer minder

Terracotta Red Mars Earth Effect Texture Acrylic Paste 250 ml by Green Stuff World, is an exceptionally versatile product that has become a must-have for modelers, hobbyists, and creative craft enthusiasts. This textured acrylic paint has gained popularity thanks to its ability to transform your bases for miniatures, dioramas, and a wide range of art projects into true masterpieces of realism. With its rich reddish terracotta shade, this texturing paste allows you to perfectly recreate the appearance of earth textures on diorama bases, scenes, or vignettes. High-quality formula and dense consistency allow you to apply it with precision, modeling terrains ranging from arid deserts to lush rural landscapes. The versatility of this textured paints is further highlighted by its ability to adhere firmly to a variety of surfaces, such as plastic, resin, wood, and more. This makes it an ideal choice for customizing and bringing life to your miniatures, models, and dioramas. It allows you to texturize and color a surface with a single application in the desired thickness. It dries quickly, which speeds up the work process and allows you to move forward with your project efficiently.  Whether you are creating an epic battle scene, a tranquil rural landscape or detailed scenery for your miniatures, this texturing paste is the perfect tool to add that touch of authenticity that will make your projects stand out. Discover the world of creative possibilities that Green Stuff World Terracotta Earth Effect Texturing Paste offers you and elevate your crafts and creations to an impressive level of realism. Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.  Contains 1 pot of 250ml textured paste

Lees meer minder