Lava River - Neoprene Terrain Set
High quality 2D neoprene terrain tiles compatible with any roleplaying game. Wage your battles on an epic battlefield overrun by a scorching 10 cm (4 inch) wide river of lava, complete with smoke and burning rock. Stone bridges and loose boulders allow for different gameplay mechanics, it all depends on your imagination!
Create different river streams in each game by changing round the tiles. They can be combined with each other creating a lava river of up to 4.5 metres (180 inches), and once victory has been declared it can be packed away easily tile by tile, allowing for easy storage thanks to their small size.
Neoprene Modular Tiles
Printed using heavy-duty materials, the Neoprene Terrain Sets are fade and scratch resistant.
The tiles have a completely seamless matt finish on the printed image, which allows photographs to be taken of miniatures with virtually no fabric grain showing up in extreme close-up photographs, particularly useful for small-scale sizes.
The antislip rubber backing provides a firm grip on the table and creates a high level of friction, preventing miniatures from sliding when on an even surface and assuring their position on the battlefield.
The nature of neoprene means these tiles are very resilient yet flexible, completely resistant to wrinkles and creases.
This Terrain Set includes:
2x Lava stone crossings - 8x12" (20x30cm)2x Lava bridges - 8x12" (20x30cm)4x Lava diagonal tiles - 8x8" (20x20cm)6x Lava short curves - 8x8" (20x20cm)3x Lava long curves - 8x12" (20x30cm)2x Lava intersections - 8x8" (20x20cm)4x Lava dead-end - 8x8" (20x20cm)
Total x23
Neoprene Terrain set compatible with all fantasy wargames
Highest quality 2D terrain on the market. Constructed from neoprene exactly to the specifications to be compatible with Warhammer but can be used in all kind of fantasy wargames to use on your table directly or on a battle mat.
These 22 durable pieces of terrain will take your epic battles to a whole new level. Light and easy to store and transport, you will always have a great battlefield ready to use. The terrain pieces are anti-slip and resistant to wrinkles and creases.
This 2D Terrain Set comes with:
3pcs Hills - size: 6x8”3pcs Forests - size: 6x10"2pcs Fields - size: 6x8”6pcs Walls - size: 1x8”2pcs Water / Lakes - size: 6x10”2pcs Ruins - size: 8x8”2pcs Buildings - size: 6x8”2pcs Rocks - size: 6x6”
TOTAL 22
Resin Cast Frames Large with spring clips
Resin Cast Frames are designed to facilitate the creation of multiple mold boxes for resins and silicones. Manufactured in a 5mm solid transparent methacrylate material, and features L-shaped sides for added structural integrity. Includes four spring clips, which play a crucial role in securely holding each frame in position. It can be utilized repeatedly, making it an economical alternative to continually buying or constructing separate mold boxes. They can be configured in various ways to create molds with diverse dimensions and shapes without the need for investing in an array of mold boxes. These molds greatly facilitate the mold box assembly process but do not completely seal the joints, so to prevent any resin from leaking out during the molding process, the usual joint sealing process should be carried out.
Instructions for use
Make sure the area is completely free of imperfections and dirt before starting. Position the frames so that the L-shaped matches the overlap of the next frame.
If using a release agent, note that the resin walls may not be completely smooth.
Place the spring clips on the L-shaped joints to secure the position.
To ensure a tight seal both between the frames and with the base, any remaining gaps should be filled with modeling clay to prevent resins, silicone, or casting compound from running out. Any gaps may cause leaks.
Pour resin evenly over the surface.
After the recommended curing time, first remove the spring clips carefully and then the frames firmly.
Contains:
4x Methacrylate L-pieces, size 100mm high x 200mm long.
4x Fastening clips
SPRAY Primer Colour
Primers with colour with a high concentration of pigment and excellent coverage for its application on metal, plastic, or resin miniatures, with a self-leveling, resistant, and highly adherent matt finish.
The paint is a synthetic lacquer that cures very fast. Painted areas with hobby spray paints won't be affected by acrylic paints, enamel paints, or other types of hobby weathering.
Contents 1x Spray can 400ml
INSTRUCTIONS FOR USE:
- Shake the can properly before each use.- Apply this spray paint with oscillations from left to right to ensure a constant and even application.- Hold the aerosol at least 20-30 centimeters away from the surface you want to paint. This will ensure that the paint is evenly distributed over the entire surface. If you have to access difficult areas, you can get close, but move the spray paint quickly to avoid build-up and drips.- Do not apply the paint from too far away to avoid a rough surface. If it is applied from too close it may drip.- Sprays have propellant gas that could damage some plastics if applied too closely.- Clean the diffuser after each use by spraying a little paint but with the bottle completely upside down. In this way, only gas will come out cleaning the inner tubes as well as the diffusers.
WARNINGS
Keep out of children reach.Keep away from heat / sparks / open flames / hot surfaces.Do not spray on an open flame or another source of ignition.Do not pierce or burn, even after use.Keep the recipient hermetically sealed.IN CASE OF INHALATION: Remove person to fresh air and keep in a position that facilitates breathing.IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, see a doctor.
Terracotta Red Mars Earth Effect Texture Acrylic Paste 250 ml by Green Stuff World, is an exceptionally versatile product that has become a must-have for modelers, hobbyists, and creative craft enthusiasts. This textured acrylic paint has gained popularity thanks to its ability to transform your bases for miniatures, dioramas, and a wide range of art projects into true masterpieces of realism.
With its rich reddish terracotta shade, this texturing paste allows you to perfectly recreate the appearance of earth textures on diorama bases, scenes, or vignettes. High-quality formula and dense consistency allow you to apply it with precision, modeling terrains ranging from arid deserts to lush rural landscapes.
The versatility of this textured paints is further highlighted by its ability to adhere firmly to a variety of surfaces, such as plastic, resin, wood, and more. This makes it an ideal choice for customizing and bringing life to your miniatures, models, and dioramas.
It allows you to texturize and color a surface with a single application in the desired thickness. It dries quickly, which speeds up the work process and allows you to move forward with your project efficiently.
Whether you are creating an epic battle scene, a tranquil rural landscape or detailed scenery for your miniatures, this texturing paste is the perfect tool to add that touch of authenticity that will make your projects stand out. Discover the world of creative possibilities that Green Stuff World Terracotta Earth Effect Texturing Paste offers you and elevate your crafts and creations to an impressive level of realism.
Dries in 5-30 minutes depending on the thickness of the application. Water-soluble. Tools can be cleaned with water.
Contains 1 pot of 250ml textured paste
Acrylic starter kit for Painting Fantasy miniatures from Green Stuff World
This is a Maxx Formula Acrylic Paint Set specifically formulated for use in painting models, miniatures, and dioramas. It includes a range of highly pigmented acrylic colors perfect for hobbyists who want to take their projects to the next level and achieve professional-looking results. The Maxx Formula Hobby Sets by Green Stuff World is an exceptional product that offers high-quality paints in a range of vibrant colors.
These acrylic paints are highly pigmented and offer a high-coverage and smooth matte finish. They are made using new-generation pigments that have been specially selected by experienced artists to provide hobbyists with the highest quality acrylics possible.
One of the key features of these acrylics is the use of dropper bottles. These bottles are designed for easy and precise dispensing of the paint and a controlled flow of paint. They are perfect for hobbyists who need to apply the paint exactly where they need it, without wasting any. The dropper bottles also include a metal ball that helps the mixing thoroughly and ensures even distribution throughout the bottle. This feature is particularly useful for hobbyists who may not use them regularly, as it prevents the pigment from settling at the bottom of the bottle over time. Additionally, the dropper bottle has a tight-fitting cap that seals the bottle tightly, preventing air from entering and drying out the paint. This helps to ensure that the colors remain fresh and usable for a long time, even if it is not used frequently.
These are versatile colors that can be used with both brush and airbrush techniques. Hobbyists can also use these paints with an airbrush when slightly diluted with Acrylic Thinner, allowing them to achieve a range of effects that would otherwise be difficult to achieve. This versatility makes the range ideal for those who want to experiment with different painting techniques and achieve different effects.
Whether you're a beginner or an experienced hobbyist, the Maxx Formula Hobby Set can help you take your projects to the next level.
This product is water-based, non-toxic, and does not contain latex. Before use, be sure to shake the container well. It also comes with a stainless steel mixing ball to ensure even distribution of the paint.
Contains 8x 17ml.
1 x Andalusian Earth
1 x Choco Brown
1 x Field Green-Grey
1 x Dark Beige
1 x Golden Cream
1 x Yoda Green
1 x Ranger Green
1 x Moon Mist Grey
Innovative self-adhesive scenic basing shrub tufts perfect for decorating miniature bases, scenery, field paths, lakes, river shores, embankments & slopes as well as the edges of forests and roads, creating flower beds or brightening meadows. Just take the grass tufts out of the package using tweezers and fix them with its self-adhesive sticky bases. Although self-adhesive, a dab of PVA glue may be required to apply to some surfaces for a permanent fix.
Fiber Size: 6mm high
Plastic sheet size: 7x14cm
Color: Orange
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.
Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion.
They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes.
For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints.
Fiber Size: 12 mm high
Length: 6 cm
Sheet size: 7x14 cm
Content: 12
Hot Glue Sticks for glue gun are made from a thermoplastic material designed to be melted in hot glue guns. When heated, the glue stick turns into a liquid form, allowing it to be applied easily to various surfaces. As it cools, the glue solidifies, creating a strong bond between the materials being joined.
They are the perfect solution for all your crafting, DIY, and repair needs and they are designed to fit most standard hot glue guns, ensuring a smooth and reliable flow for quick and durable adhesion on various materials such as fabric, plasticard, wood, ceramics, metal, foams, cork, and more. Available in both transparent and black, they offer versatile options depending on the nature of your project.
Transparent color: they are ideal for general use, allowing for discreet bonding without leaving visible marks. Whether you're working on crafts, home decor, or repairs, the clear adhesive blends seamlessly into your materials, providing a strong hold while maintaining the appearance of your project.
Black color: they are perfect for tasks where you want the adhesive to either blend into dark materials or stand out as part of your design. They’re a popular choice for cosplay, electronics, automotive repairs, and any creative project that involves darker color schemes. They provide a clean, and polished look for professional results, making it a favorite for artists, designers, and hobbyists alike.
These glue sticks heat up quickly and bond strongly, providing a fast-setting adhesive that ensures your projects stay in place. Perfect for beginners and experts, these hot glue sticks are non-toxic and safe to use with proper handling.
Each pack contains 30x hot glue sticks 11mm in diameter and 190 mm in length offering excellent value for money. Whether you're fixing, crafting, or creating, these are the ideal tool to help bring your ideas to life!
Acrylic Ink tranparant
GSW acrylic inks stand out for their innovative formulation, combining high-quality pigments in an ultra-fluid base. This product is distinguished by its fast drying, permanence, water resistance once dry, and exceptional fluidity. These characteristics make it an ideal choice for a wide range of artistic techniques, from glazes in the painting of model figures or miniatures, painting comics with brush or fillable markers, to creating watercolor-like painting effects.
Although initially characterized by opacity, and thus their ability to provide full, solid coverage without the need for dilution, they can also offer a certain degree of transparency when properly diluted. However, their main strength lies in their ability to create smooth, uniform color gradients. This characteristic makes opaque inks ideal for jobs that require smooth transitions between shades, such as creating backgrounds or applying base coats. Overall, these inks are an exceptional choice for artists looking to achieve striking and consistent color effects in their work.
The product is marketed in a glass bottle equipped with a dosing pipette, which facilitates precise control of each drop of pigment. This feature allows you to precisely regulate both the quantity and intensity of the mixtures used in your artwork, giving you the freedom to capture your visions with unparalleled clarity and precision.
With opaque acrylic inks, you can create everything from subtle gradients to powerful OSL lighting effects with high color contrasts, exploring an infinite range of tones and shades. Their opacity allows you to layer color with ease, creating effects that will captivate any viewer.
Main characteristics:
Extremely pigmented.
Matte finishes
Vivid, fluid, and intense colors.
It is not necessary to dilute it for use with airbrush or calligraphy.
Strong resistance to light.
Compatible with all other GSW products as well as our acrylic mediums
A wide variety of colors are available, both opaque and transparent, designed to meet all imaginable creative needs.
Contents: 1 glass bottle of 30ml with dispensing pipette.Pigment Index: PR101/PW6/PY83Finish: MatteLightfastness (Blue wool scale): 8 - Excellent (ASTM I)Opacity: Opaque
Hobby Sand
Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue.
Size of grain: Approx. 1-3mmColour: RedContains: 200ml
Hobbyzand
Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen.
Korrelgrootte is 1-3mm (grof)
Roodachtig (zacht rood)
Verpakking is pot met draaideksel
Inhoud 200ml (ong 100gr)
Dwarf Resin bits are compatible with games such as Warhammer: The Old World and any dwarf army.
This set of resin products created by Green Stuff World has been specially designed to be compatible with games such as Warhammer: The Old World and more specifically the dwarf army. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures, and accessories with exceptional detail, enhancing your gaming experience.
Bring a realistic touch to your bases, dioramas, and figures using these high-quality, ABS-like plastic bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales.
Selecting the right model glue and modeling tools is essential to assembling your Warhammer bits effectively and achieving optimum results. Understanding the project requirements, exploring the available options, and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice, and considering long-term maintenance are crucial to making informed decisions.
These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale).
Each set includes 20x Dwarf Pistols
Dwarf Resin bits are compatible with games such as Warhammer: The Old World and any dwarf army.
This set of resin products created by Green Stuff World has been specially designed to be compatible with games such as Warhammer: The Old World and more specifically the dwarf army. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures, and accessories with exceptional detail, enhancing your gaming experience.
Bring a realistic touch to your bases, dioramas, and figures using these high-quality, ABS-like plastic bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales.
Selecting the right model glue and modeling tools is essential to assembling your Warhammer bits effectively and achieving optimum results. Understanding the project requirements, exploring the available options, and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice, and considering long-term maintenance are crucial to making informed decisions.
These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale).
Each set includes 12x Dwarf Spears
Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs.
Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch)
USE INSTRUCTIONS:
1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations.
2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this.
3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking.
4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture.
5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay.
MATERIALS:
There are plenty of different putties and clays on the market and all of them can be textured using the proper technique.
Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn!
In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases.
For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline.
Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.
*** For this type of epoxy putties, it is very important to clean the rolling pins properly after use.
CARE INSTRUCTIONS:
After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required.
SAFETY:
To ensure safety, children should be closely monitored by a responsible adult.
Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs.
Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch)
USE INSTRUCTIONS:
1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations.
2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this.
3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking.
4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture.
5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay.
MATERIALS:
There are plenty of different putties and clays on the market and all of them can be textured using the proper technique.
Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn!
In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases.
For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline.
Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone.
*** For this type of epoxy putties, it is very important to clean the rolling pins properly after use.
CARE INSTRUCTIONS:
After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required.
SAFETY:
To ensure safety, children should be closely monitored by a responsible adult.
Plastic Barricades | Steel Barricades printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
Metal Barricades | Steel Barricades printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
Traffic Lights 70mm printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: 2x standard + 4x pedestrian (70mm height)Scale: 1:58 - 1:48Content: 6x
Chain Link Fences | Police Barriers printed in 3D for miniatures and Wargames
3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience.
By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. The central part of the metal fences can be easily broken to simulate holes and defects.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures.
Size: 50x70mmScale: 1:58 - 1:48Content: 5x
Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer.
Immerse yourself in the fascinating world of Dungeon and Dragons, wargames and other board games with our miniature DnD coins, designed to bring an authentic and detailed touch to your adventures. Made from an innovative combination of plant fibers and aluminum, these micro coins are microplastic compliant, ensuring your gaming experience is both immersive and environmentally friendly.
DnD coins feature a 3mm diameter, a size carefully chosen to offer maximum versatility and realism in your games. The round shape of each coin, together with its antique gold color, brings a genuine appearance that evokes the feeling of handling real ancestral treasures. The reflections on their surface enhance this perception, creating a subtle sheen that makes them stand out in any gaming scenario.
They can be easily painted with acrylic paints and inks, allowing you to add unique details to suit the theme of your campaign or game. The ability to be glued with white glue or tuft glue makes them easy to integrate into dioramas, game boards or even as part of custom miniatures, offering unparalleled flexibility.
Imagine your players finding a treasure chest full of treasure, the excitement on their faces as they feel the weight and see the glow of their reward. These micro coins are not only an impressive visual addition, but can also be used as game elements, markers or even as rewards in tournaments and special events.
Contains: 20 grams net
Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.
They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama.
Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted.
Thickness: 2 mmSize: 150x225 mmContent: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows.
The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project.
The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look.
Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue.
Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set
Miniature bases with Skill Rings 40 mm
Enhance your Blood Bowl and fantasy football games with our complete pack of 10 versatile Blood Bowl Bases and 100 colored skill rings to represent all possible equipment options. They have been designed to accommodate up to 4 different skill rings per miniature. These bases feature fittings that allow for quick and easy exchange of skill rings between games or even during play.
Our innovative system includes nine different interchangeable skill rings, allowing you to add both functionality and visual flair to your game. By mixing and matching various colors, you can give your miniatures a vibrant and engaging look. Whether you're playing a casual match with friends or competing in a league, this basing system will elevate your gameplay experience.
The 32mm are perfect for standard player models, such as linemen, throwers, catchers, and blitzers. These core players fit well on the standard-sized squares of the game board. In contrast, the 40mm are designed for larger models, like Ogres, Trolls, Minotaurs, and Treemen. The larger ones provide stability for bigger figures and help distinguish them from regular players, enhancing both gameplay clarity and visual distinction.
Additionally, this product includes two pre-drilled holes to fit 5x2mm magnets, or you can glue other sizes directly onto the inner supports. These neodymium magnets offer two key benefits:
Magnetize Your Miniatures for Easy Transport: Secure your miniatures in a miniature carry case with ease.
Interchangeable skill rings: Use the same Blood Bowl bases with skill rings on different miniatures without needing to change all the bases. Simply attach a coin or piece of metal to the miniature, allowing the neodymium magnet to hold it securely on the new base, making it easily interchangeable.
Upgrade your Blood Bowl and fantasy football games with our 10-pack of versatile bases + 100 colored skill rings, designed for both functionality and aesthetic appeal.
Content:
x10 miniature bases 40mm (thickness 5mm)
x20 Black arches
x10 Red arches
x10 Blue arches
x10 Yellow arches
x10 White arches
x10 Grey arches
x10 Green arches
x10 Orange arches
x10 Purple arches
DnD Tiles 32mm
Pack of Dungeon Tiles sheets to be cut to the desired size with a modeling cutter or even scissors, perfect for making modular dungeon tiles. Color grey which serves as an excellent base for painting also helps in highlighting any textural details applied to the tile surfaces, such as brick patterns, cobblestone textures, or intricate dungeon floor designs. This base color can be left as is for a more subdued and natural look or completely covered with vivid acrylic paints to match the aesthetic of a specific game setting.
They have been crafted from medium-density foamed PVC due to its balance between density and workability for creating customizable game environments in tabletop role-playing games such as Dungeons & Dragons and Pathfinder. It is easy to cut and shape with basic tools like utility knives or rotary cutters and sufficiently hard to maintain its shape and resist warping or damage during use, yet it remains light enough to be easily transported and rearranged. This lightness is especially beneficial for gamers who need to set up and break down their gaming setups frequently.
After texturing, the tiles can be primed and painted using acrylic paints. Model paints are preferred for their quick drying time, ease of use, and durability. They also offer a vast range of colors and are easily mixed to create custom shades and finishes. Techniques like dry brushing, washing, and stippling can be employed on these painted surfaces to enhance the visual depth and detail, making each piece a unique part of the dungeon landscape.
They provide a solid foundation for tabletop RPG gameplay since their modular nature allows for the construction of varied and dynamic environments, adaptable to any game scenario and board game. Players can visualize their characters' movements and actions with clarity, thanks to the precise scaling and detailed textured floors.
Content: 3 sheets of 192x288mm with 32mm gridThickness: 3mmColor: Anthracite GrayMaterial: PVC
Warning: The material includes a thin transparent plastic film that must be removed before painting.
Resin Torture Chair
A 3D-printed set for Dungeon and Dragons, Hero Quest, or Pathfinder can be a fantastic addition to your hobby toolkit. 3D printing allows you to create highly detailed and realistic custom sets, elevating your gaming experience.
By adding these ABS-like resin DnD bits to your game boards you can add a realistic touch to your creations. It has been carefully designed to mimic classic elements present in many medieval castles but in miniature.
Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your Dungeon Tiles. This product comes unpainted and is perfect for 25-28-35-54 mm (1:48 - 1:35) miniatures.
Content: 1x Resin Torture Chair
Grass Tufts 6mm - color Burnt
Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface.
Although its built-in adhesive ensures a solid initial hold, it is advisable to apply a small amount of additional modeling glue on uneven surfaces to ensure permanent and optimal adhesion.
They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature.
For more realism combine them with our static grass, basing materials, and textured paints.
Fiber Size: 6mm high
Plastic sheet size: 7x14 cm
Content: 75 tufts
Grass Tufts 12 mm - Winter
Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface.
Although its built-in adhesive ensures a solid initial hold, it is advisable to apply a small amount of additional modeling glue on uneven surfaces to ensure permanent and optimal adhesion.
They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature.
For more realism combine them with our static grass, basing materials, and textured paints.
Fiber Size: 12mm high
Plastic sheet size: 7x14 cm
Content: 75 tufts
Grass Tufts 12 mm - Light Green
Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface.
Although its built-in adhesive ensures a solid initial hold, it is advisable to apply a small amount of additional modeling glue on uneven surfaces to ensure permanent and optimal adhesion.
They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature.
For more realism combine them with our static grass, basing materials, and textured paints.
Fiber Size: 12mm high
Plastic sheet size: 7x14 cm
Content: 75 tufts
Grass Tufts 2 mm - color Winter
Model grass clumps, also known as grass tufts, are a revolutionary solution for creating detailed and realistic landscapes in your miniature, diorama, and scenery projects. Their self-adhesive design greatly simplifies the decorating process: simply peel off the tufts of grass with precision using tweezers or your fingers, and adhere them to the desired surface.
Although its built-in adhesive ensures a solid initial hold, applying a small amount of additional modeling glue on uneven surfaces is advisable to ensure permanent and optimal adhesion.
They have been meticulously designed with premium materials, ensuring a natural, long-lasting look to your creations. Their density and texture provide impressive realism, making them the ideal choice for bringing your designs to life with a touch of authentic nature.
For more realism combine them with our static grass, basing materials, and textured paints.
Fiber Size: 2 mm high
Plastic sheet size: 7x14 cm
Content: 125 tufts
