GreenStuffWorld

The Green Stuff World hand sandpaper holder or hand sanding block is a sturdy yet lightweight tool, 3D printed in high-strength PLA, and offers the ultimate solution for achieving flawless surfaces in scale modeling, wargaming, dioramas, and cosplay. Its ergonomic design provides a comfortable and precise grip, allowing for both rough sanding and fine polishing on miniatures, 3D-printed parts, or EVA foam armor. Available in two versions — flat and curved — the holder adapts to any geometry: straight vehicle edges, organic scenic-base contours, or pronounced curves on helmets and pauldrons. The internal clamp keeps wet- or dry-sandpaper sheets perfectly taut and wrinkle-free, whatever the grit thickness. Its width matches exactly half a sheet of Green Stuff World’s standard sandpaper, maximising the use of every sheet; nevertheless, it can be used with paper from any other brand, making it a versatile, indispensable addition to your workbench. Dimensions: 45 mm wideSurface: CurvedContents: 1 ×

Lees meer minder

Resin Traffic Cones 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made with 3D printing technology for high-quality and realistic details, enhancing your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities, but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 32 mm (1:48) miniatures. Scale: 1:48Content: 10x 

Lees meer minder

Foam Sanding Pads Coarse grit (400) Hobby foam sandpaper pads are available in different grits and they are valid either for rough or fine sanding. Each grit is marked with a different color and made of soft and flexible EVA foam which makes them perfect for sanding curved edges as well as to be cut into any size or shape allowing to reach the most difficult areas. Measurements: 70x18 mmThis set includes 10 pieces

Lees meer minder

Printed Mailboxes (pack x14) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 8x10x3mm - 12x23x12mmScale: 1:58 - 1:48Content: 14x

Lees meer minder

Shopping Carts (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 40x35x30mmScale: 1:58 - 1:48Content: 2x Shopping Carts

Lees meer minder

Waiting Park Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 45x25x24mmScale: 1:58 - 1:48Content: 2x

Lees meer minder

Waiting Church Benches (pack x2) 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games, you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: 54 x 24 x 30mmScale: 1:58 - 1:48Content: 2x

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Miniature Windows - Industrial Arched 2 - Large Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 equal packs

Lees meer minder

Miniature Windows - Classic Arched - Large Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Lees meer minder

Miniature Windows - Classic (small) Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Lees meer minder

Miniature Windows - Basic Square (small) Miniature window frames are meticulously crafted, scaled-down versions of real windows designed for integration into modern and fantasy dioramas as well as dollhouses. These frames play a crucial role in enhancing the realism and intricate detail of dioramas, defining the architectural style and period of the houses.  They can be installed in prefabricated or custom-made houses using clear-drying adhesives. Essential tools for painting, creating, and installing these frames include sharp cutting blades, tweezers, and fine-tipped brushes. Miniature window frames are essential for bringing small worlds to life, whether for a charming dollhouse or a detailed diorama. Enhance the finish using them with our miniature stained glass collection, available exclusively at Green Stuff World, for a stunning and realistic touch to your creations. We recommend using PVA glue or cyanoacrylate glue for assembly and model paints for painting, as these frames are delivered unpainted. Thickness: 2 mmSize: 150x220 mmContent: Each set includes 2 parts (Part A + Part B) that can be used together for greater detail and depth, or they can be used separately. 

Lees meer minder

This set of grenades is very versatile. It can complement a lot of scenery, scenes, and miniatures. In fact, they are perfect for staging one of the new Kill Team combat rules, as you can use these grenades to equip your character and add the smoke and stun grenades to show the attack and its effect. They are also compatible with other Warhammer games where grenades are used during combat, as well as in WWII models or similar. This set of grenades is made of high-quality resin that provides optimal detail to give the necessary realism to your projects. It contains a total of 40 pieces: two boxes of grenades, the two lids corresponding to the boxes, and, the rest, anti-attack type grenades of different sizes. To achieve a professional result, combine these resin bits with the rest of our catalog and incorporate the depth and realism that will make your creations unique. Contents: x40 Grenades for dioramas

Lees meer minder

Acrylic starter kit for Painting Fantasy miniatures from Green Stuff World This is a Maxx Formula Acrylic Paint Set specifically formulated for use in painting models, miniatures, and dioramas. It includes a range of highly pigmented acrylic colors perfect for hobbyists who want to take their projects to the next level and achieve professional-looking results. The Maxx Formula Hobby Sets by Green Stuff World is an exceptional product that offers high-quality paints in a range of vibrant colors. These acrylic paints are highly pigmented and offer a high-coverage and smooth matte finish. They are made using new-generation pigments that have been specially selected by experienced artists to provide hobbyists with the highest quality acrylics possible. One of the key features of these acrylics is the use of dropper bottles. These bottles are designed for easy and precise dispensing of the paint and a controlled flow of paint. They are perfect for hobbyists who need to apply the paint exactly where they need it, without wasting any. The dropper bottles also include a metal ball that helps the mixing thoroughly and ensures even distribution throughout the bottle. This feature is particularly useful for hobbyists who may not use them regularly, as it prevents the pigment from settling at the bottom of the bottle over time. Additionally, the dropper bottle has a tight-fitting cap that seals the bottle tightly, preventing air from entering and drying out the paint. This helps to ensure that the colors remain fresh and usable for a long time, even if it is not used frequently. These are versatile colors that can be used with both brush and airbrush techniques. Hobbyists can also use these paints with an airbrush when slightly diluted with Acrylic Thinner, allowing them to achieve a range of effects that would otherwise be difficult to achieve. This versatility makes the range ideal for those who want to experiment with different painting techniques and achieve different effects. Whether you're a beginner or an experienced hobbyist, the Maxx Formula Hobby Set can help you take your projects to the next level. This product is water-based, non-toxic, and does not contain latex. Before use, be sure to shake the container well. It also comes with a stainless steel mixing ball to ensure even distribution of the paint.  Contains 8x 17ml. 1 x Hellfire Red 1 x Dwarven Flesh 1 x Bestial Brown 1 x Ivory Tusk 1 x Rocket Green 1 x Quicksilver 1 x Elder Bronze 1 x El Dorado

Lees meer minder

Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.  Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion. They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes. For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints. Fiber Size: 12 mm high  Length: 6 cm Sheet size: 7x14 cm Content: 12

Lees meer minder

Model grass strips are an innovative solution for the creation of detailed and realistic landscapes in miniature, diorama, and scenery projects. These self-adhesive tuft strips greatly simplify the process of decorating large surfaces: you just need to carefully remove the grass strips using tweezers or your fingers and adhere them to the desired surface. They can be used as they are or cut into smaller sizes.  Although their built-in adhesive provides a firm initial hold, it is recommended to apply a small amount of modeling glue to uneven surfaces to ensure optimal and long-lasting adhesion. They are designed with high-quality materials, ensuring a natural and durable look to your creations. Their density and texture provide amazing realism, making them ideal for adding an authentic touch of nature to your landscapes. For even more realism, combine them with our static grass, grass tufts, basing materials, and textured paints. Fiber Size: 12 mm high  Length: 6 cm Sheet size: 7x14 cm Content: 12

Lees meer minder

Hobby sand is an indispensable material on any modeler's table or workshop as it is ideal for building realistic terrain in dioramas, decorating miniature bases for wargames, and many other creative hobbies. Made of an easy-to-glue and paint material, it is also available in a wide range of colors and sizes, allowing you to choose the most suitable option for each project. When applied to the base or floor of a model, it imitates the natural textures and characteristics of real landscapes, providing a high level of detail and authenticity. It is recommended to apply with PVA glue, tuft glue, or cyanoacrylate glue. Contains: 200 ml (approximate weight 100gr) Size of grain: Approx. 2-5mmColor: NaturalContains: 200ml (approximate weight 100gr)

Lees meer minder

Hobby Sand Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue. Size of grain: Approx. 1-3mmColour: FieldContains: 200ml Hobbyzand Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen. Korrelgrootte is 1-3mm (grof) Veldkleur Verpakking is pot met draaideksel Inhoud 200ml (ong 100gr)

Lees meer minder

Hobby Sand Sand used for bases and modeling made out of the gravel. It is recommended to apply with either white glue or cyanoacrylate glue. Size of grain: Approx. 1-3mmColour: RedContains: 200ml Hobbyzand Zand dat gebruikt kan worden voor bases en modelbouw. Gemaakt uit gravel. Gebruik dit zand op een onderlaag die ingesmeerd is met PVA, witte lijm of secondenlijm. Uitschudden of met de vinger verdelen. Korrelgrootte is 1-3mm (grof) Roodachtig (zacht rood) Verpakking is pot met draaideksel Inhoud 200ml (ong 100gr)

Lees meer minder

Dwarf Resin bits are compatible with games such as Warhammer: The Old World and any dwarf army. This set of resin products created by Green Stuff World has been specially designed to be compatible with games such as Warhammer: The Old World and more specifically the dwarf army. 3D resin printing offers a fascinating addition to your arsenal of wargaming and hobby tools. With this technology, you can create custom scenery, miniatures, and accessories with exceptional detail, enhancing your gaming experience. Bring a realistic touch to your bases, dioramas, and figures using these high-quality, ABS-like plastic bits. Carefully designed to replicate real species, these are available in various shapes and sizes to suit all needs and scales. Selecting the right model glue and modeling tools is essential to assembling your Warhammer bits effectively and achieving optimum results. Understanding the project requirements, exploring the available options, and assessing their performance and suitability are key factors. In addition, taking into account available experience and resources, keeping abreast of the latest developments, seeking expert advice, and considering long-term maintenance are crucial to making informed decisions. These products are supplied unpainted and are ideal for 28-35-54mm miniatures (1:48 - 1:35 scale). Each set includes 20x Dwarf Pistols

Lees meer minder

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Lees meer minder

Textured Rolling Pins capable of pressing a continuous repeated pattern on clay and putties. Made of clear PMMA plastic with amazing non-stick properties. Non-toxic. They come in several different textures that you can purchase based on your specific needs. Length: 14'50 cm (5’5 inches)Diameter: 2’5cm (1 inch) USE INSTRUCTIONS:  1st - Properly mix the putty/clay until ready according to the manufacturer's recommendations. 2nd - Extend the putty/clay on a surface to be textured. For optimal results, make sure you have got a smooth and even surface before impressing with the Rolling Pins. *** We recommend using a plain Rolling Pin for this. 3rd - Depending on the type of putty/clay, it is advisable to wet the Rolling Pin to prevent any sticking. 4th - Slowly move the Rolling Pin applying equal pressure at all points for an even texture. 5th - Trim any excess putty/clay with a sharp knife. It is recommended to do this once it has dried to avoid any deformations in the putty/clay. MATERIALS: There are plenty of different putties and clays on the market and all of them can be textured using the proper technique. Usually polymer clay (Fimo or Sculpey type) are quite simple to work with these Rolling Pins as they allow for an easy correction of mistakes before they are baked. If the aim is to make textured bases, we recommend using MDF bases, because you can texture the polymer clay directly onto an MDF base, and then put it all in the oven, including the base. The cooking time of these clays are around 15 minutes at 150ºC. MDF Wood may leave a slight scent similar to that of toasted bread, but don't worry it won’t burn! In the case of epoxy putties, there are a variety of techniques which achieve similar results. Good thing is. you do not need to bake them, so they may be applied directly onto plastic bases. For Green Stuff putty, which is particularly sticky, it is required to slightly wet either the putty or the Rolling Pin with some water before texturing. You may also reduce the stickiness by applying talcum powder, or using (Sculptor) Vaseline. Other epoxy putties like the Milliput putty, for example, are also suitable, but we wouldn't recommend to wet them much since it will hinder your work. Furthermore, if the mixture is too sticky, it is better to continue kneading until the stickiness is gone. *** For this type of epoxy putties, it is very important to clean the rolling pins properly after use. CARE INSTRUCTIONS: After working with the Rolling Pins, use a Scratch Brush and plenty of water to clean off any residue on the Rolling Pins if required. SAFETY: To ensure safety, children should be closely monitored by a responsible adult.  

Lees meer minder

Plastic Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Lees meer minder

Metal Barricades | Steel Barricades printed in 3D for miniatures and Wargames 3D printed scenery set for your favorite wargame, which could be a fantastic addition to the scenery and terrains of your tabletop games. Made in 3D printing with high quality and very realistic details, which will enhance your gaming experience. By adding these ABS-like resin bits to your board games you add a realistic touch to your games. It has been carefully designed to mimic classic elements present in many modern cities but in miniature. Some elements in this category may require modeling glue and other modeling tools to assemble or integrate them into your game tables. This product comes unpainted and is perfect for 28-35 mm (1:58 - 1:48) miniatures. Size: (3x) 60x30mm and (1x) 50x30mmScale: 1:58 - 1:48Content: 4x  Notice: Large, flat printed resin parts may suffer some small curvature if exposed to high temperatures, e.g. during transport. In case of receiving a part with such a small curvature, it can be straightened again by applying a little heat with a hair dryer. 

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Stunning range of printed miniature stained glass, designed to bring vibrant and authentic touches to miniature scenes, dollhouses, dioramas, and scale models. Our printed miniature stained glass captures the essence of traditional stained glass with intricate designs and vivid colors, meticulously crafted to fit small-scale environments. These products are crafted using high-quality transparent plastic sheets, which serve as the perfect canvas for detailed and vibrant designs, ensuring each piece boasts sharp, clear patterns and brilliant colors that mimic the beauty and intricacy of full-sized stained glass windows. The main feature of Green Stuff World’s miniature stained glass is our innovative double-printing system. This unique method ensures that the designs remain visible and striking, even without backlighting. Whether your model is displayed in a well-lit area or a darker setting, it retains its beauty and clarity. This double printing system also makes our product ideal for use on black backgrounds, where traditional transparent stained glass effects might be lost. This innovation ensures that even in less-than-ideal lighting conditions, its visual impact enhances the overall aesthetic of your project. The interplay of light and color through them creates a dynamic and captivating visual effect, adding depth and realism to projects. Whether you’re a hobbyist, model builder, or collector, our miniature stained glass enhances the aesthetic quality of your work, providing a professional and polished look. Enhance your creations with a stunning and realistic touch using also our exclusive miniature windows collection, available only at Green Stuff World. For assembly, we recommend using PVA glue or cyanoacrylate glue. Thickness: 0.3 mmSize: 150x220 mmScale: 1/48 - 1/35Content: 1 set

Lees meer minder

Miniature bases with Skill Rings 40 mm Enhance your Blood Bowl and fantasy football games with our complete pack of 10 versatile Blood Bowl Bases and 100 colored skill rings to represent all possible equipment options. They have been designed to accommodate up to 4 different skill rings per miniature. These bases feature fittings that allow for quick and easy exchange of skill rings between games or even during play. Our innovative system includes nine different interchangeable skill rings, allowing you to add both functionality and visual flair to your game. By mixing and matching various colors, you can give your miniatures a vibrant and engaging look. Whether you're playing a casual match with friends or competing in a league, this basing system will elevate your gameplay experience. The 32mm are perfect for standard player models, such as linemen, throwers, catchers, and blitzers. These core players fit well on the standard-sized squares of the game board. In contrast, the 40mm are designed for larger models, like Ogres, Trolls, Minotaurs, and Treemen. The larger ones provide stability for bigger figures and help distinguish them from regular players, enhancing both gameplay clarity and visual distinction. Additionally, this product includes two pre-drilled holes to fit 5x2mm magnets, or you can glue other sizes directly onto the inner supports. These neodymium magnets offer two key benefits: Magnetize Your Miniatures for Easy Transport: Secure your miniatures in a miniature carry case with ease. Interchangeable skill rings: Use the same Blood Bowl bases with skill rings on different miniatures without needing to change all the bases. Simply attach a coin or piece of metal to the miniature, allowing the neodymium magnet to hold it securely on the new base, making it easily interchangeable. Upgrade your Blood Bowl and fantasy football games with our 10-pack of versatile bases + 100 colored skill rings, designed for both functionality and aesthetic appeal. Content: x10 miniature bases 40mm (thickness 5mm) x20 Black arches x10 Red arches x10 Blue arches x10 Yellow arches x10 White arches x10 Grey arches x10 Green arches x10 Orange arches x10 Purple arches

Lees meer minder

DnD Tiles 32mm Pack of Dungeon Tiles sheets to be cut to the desired size with a modeling cutter or even scissors, perfect for making modular dungeon tiles. Color grey which serves as an excellent base for painting also helps in highlighting any textural details applied to the tile surfaces, such as brick patterns, cobblestone textures, or intricate dungeon floor designs. This base color can be left as is for a more subdued and natural look or completely covered with vivid acrylic paints to match the aesthetic of a specific game setting. They have been crafted from medium-density foamed PVC due to its balance between density and workability for creating customizable game environments in tabletop role-playing games such as Dungeons & Dragons and Pathfinder. It is easy to cut and shape with basic tools like utility knives or rotary cutters and sufficiently hard to maintain its shape and resist warping or damage during use, yet it remains light enough to be easily transported and rearranged. This lightness is especially beneficial for gamers who need to set up and break down their gaming setups frequently. After texturing, the tiles can be primed and painted using acrylic paints. Model paints are preferred for their quick drying time, ease of use, and durability. They also offer a vast range of colors and are easily mixed to create custom shades and finishes. Techniques like dry brushing, washing, and stippling can be employed on these painted surfaces to enhance the visual depth and detail, making each piece a unique part of the dungeon landscape. They provide a solid foundation for tabletop RPG gameplay since their modular nature allows for the construction of varied and dynamic environments, adaptable to any game scenario and board game. Players can visualize their characters' movements and actions with clarity, thanks to the precise scaling and detailed textured floors. Content: 3 sheets of 192x288mm with 32mm gridThickness: 3mmColor: Anthracite GrayMaterial: PVC  Warning: The material includes a thin transparent plastic film that must be removed before painting.

Lees meer minder

DnD Tiles 25mm Pack of Dungeon Tiles sheets to be cut to the desired size with a modeling cutter or even scissors, perfect for making modular dungeon tiles. Color grey which serves as an excellent base for painting also helps in highlighting any textural details applied to the tile surfaces, such as brick patterns, cobblestone textures, or intricate dungeon floor designs. This base color can be left as is for a more subdued and natural look or completely covered with vivid acrylic paints to match the aesthetic of a specific game setting. They have been crafted from medium-density foamed PVC due to its balance between density and workability for creating customizable game environments in tabletop role-playing games such as Dungeons & Dragons and Pathfinder. It is easy to cut and shape with basic tools like utility knives or rotary cutters and sufficiently hard to maintain its shape and resist warping or damage during use, yet it remains light enough to be easily transported and rearranged. This lightness is especially beneficial for gamers who need to set up and break down their gaming setups frequently. After texturing, the tiles can be primed and painted using acrylic paints. Model paints are preferred for their quick drying time, ease of use, and durability. They also offer a vast range of colors and are easily mixed to create custom shades and finishes. Techniques like dry brushing, washing, and stippling can be employed on these painted surfaces to enhance the visual depth and detail, making each piece a unique part of the dungeon landscape. They provide a solid foundation for tabletop RPG gameplay since their modular nature allows for the construction of varied and dynamic environments, adaptable to any game scenario and board game. Players can visualize their characters' movements and actions with clarity, thanks to the precise scaling and detailed textured floors. Content: 3 sheets of 200x300mm with 25mm gridThickness: 3mmColor: Anthracite GrayMaterial: PVC  Warning: The material includes a thin transparent plastic film that must be removed before painting.

Lees meer minder